Counting matching models…
I have a small shop and have to move my Delta Unisaw all the time. The hose in the back kept getting snagged since the saw pretty much sits against a wall. Modeled this so the saw can be up against the wall and the hose does not get in…
added .1mm to the blower fan opening so no sanding is required. Still a tight fit, but goes in no problem with no sanding. Printed mine with elegoo abs like smokey black. Category: 3D Printer Parts
Wanted to mount my flex mini to my network skadis setup.
Aug 2025 edit: Added a new mount that uses heat inserts along with a slim case for the eddy, allowing it to pretty much sit right up to the NG shroud. I doubt it'll work with a stock Eddy casing. FEB 17, 2025 edit:I added a second model…
I recently added a cartographer3d to my K1 SE and wanted to manage the routing of the usb cable along with the hotend cable and ptfe tube a little bit better, so I drew this up really quick. Fits everything ok, the USB could be a bit…
slight modifications just to make my life easier. I didn't have an m3 screw that was long enough to mount the fan, so I made a hole to fit an m4 screw. Also added a small mount to add an adxl345 above the hotend fan. Everything else is…
My modeling skills have improved slightly since I last attempted this. Upgraded my previous model to look a bit cleaner and hopefully work better. Three versions depending on your need. I use the angled one on my table saw, but the other…
Kept losing bottles of glue so I made this really quick to keep them together and organized. Made to fit three Stick Fast CA glue and two bottles of activator. Category: DIY
I wanted to give my SV03's gantry a bit more clearance. Extended out arm about 20mm.
Original model didn't work well with the WS2812B LEDs I had, the spacing was off. Remade the model so that the LEDs sit in the middle of the diffusers(?). Only needed 10 LED strips for my set up, let me know if you'd like a longer one.…
I have a small shop and have to move my Delta Unisaw all the time. The hose in the back kept getting snagged since the saw pretty much sits against a wall. Modeled this so the saw can be up against the wall and the hose does not get in…
need 4 mechanical keyboard switchs, 4 m3 heat set inserts and m3 screws. Final Version: My updated, cleaned up version of the remote. Wanted it to have a clean look. There's two housing versions: one if you plan to run it off the usb C…
I bought the cheap generic adxl345s and they are smaller than what the original model was sized for. This one should fit them. Category: 3D Printer Accessories
The one by Diskea was too small and did not fit my Photon Mono 4k with the black plate. Increased the size of the hole by 2mm in blender (have no idea what I'm doing) and hoping this fits. Edit: There are two versions of the photon mono…
Wanted to mount an adxl345 to my SV03. Best place I could think of was the part cooling fan. Mounts to the 4020 blower fan. Note: you'll have to get longer screws, at least 2mm longer. update: after making like 20 different variations…
I have a unisaw X, can't remember the exact model number. When I got it, it didn't come with a motor cover. I made one out of mdf, and it's working for the most part, but I want something closer to the original. Mocked this up really…
Was forcing a hose to fit when I realized could print an adapter. Printed this in TPU. Fits shroud snug, but had to tape other part to the hose. Too lazy to adjust and reprint. Has been working perfectly though. Category: Machine Tools
BTT LCDs have a longer button and the hole for the knob was too big and let out too much light, so I made the hole smaller and extended the button past the surface to accommodate the longer length. edit: made a v2 that has a flush face. I…
The cabling on the x gantry of my SV03 kept sagging no matter what I tried. The netting or whatever it's called started getting pulled apart from rubbing on prints and ended up destroying a long print. Mocked this up quick to add 10x20…
I didn't like that removing the fan housing for the hotend would take the BL touch with it on an SV03, and could require to redo z offset, so I made this to attach to the motor/extruder mount. It's kind of a tight fit, and you need a…
Track for the guides was too wide for the fence I have on my unisaw, and didn't have any scraps the size I needed/wanted, so I modeled a simple mounting system. You'll need the provided hardware with the jessem guides, plus 4 m3 heat…
Needed a stand for my home theater speakers, and I was too lazy to make something out of wood. CADed this up really quick. Comes together with .75 inch dowels from home depot. Cut them to whatever length you need, cut one end at 10…
These are all currently available results.
