Counting matching models…
Fishing hook remover. Place the line in the slot and slide the disgorger along the line until the head on the disgorger engages with the hook. While keeping the line tight, press the hook a little into the mouth of the fish - this will…
A little tool for taking MC4 connectors apart. Simply press the tool over the connector as shown in the picture and pull the connector apart.
Protective end cap for ScubaPro MK25. Printed in clear TPU with 25% infill.
I originally printed and used the well constructed spool holder designed by Simone Spezzigu https://www.printables.com/model/597464-improved-spool-holder-for-kingroon-klp1, but needed something wider for a couple of older spools of…
A small clip that can be used to fix the top of the “AD5M minimal enclosure” variants, that has a small recess. The reason for this model is, that the magnetic fixing does not work reliably for me. Simply print 4 of the clips and replace…
This object is meant to fix filament tube and to move the runout sensor to a more sensible place. The filament tube is fixed, so you do not need three hands to load filament anymore - now you can push the filament into the runout sensor…
A emergency balance tack (in case you have to few or non at all) for watchmakers. It consists of the printed base and a toothpick cut in two pieces (approx. 2/3). Insert the cut end of the toothpick into the holde and press it in as long…
My Gillette Fusion shaver did not come with any protection for the razor blade head, so I designed this one to protect it when travelling. The model is meant to be printed in TPU ! I have not tested it in other materials and do not think…
Denne model sikrer at en 1½ størrelse LK Fuga kontakt altid er tændt. Den fungerer på den måde, at man fjerner kontaktdækslet med f.eks. en skruetrækker (eller bestikkniv) - bare træk til, da dækslet er trykket fast. Herefter monteres det…
Travel case for cotton buds that does not take up much room in the toiletry bag and keeps the buds from being everywhere. Here printed on an A1 mini using the 0.2mm standard profile with inner wall set to 0.35mm and outer walls to 0.4mm…
NOTE: This is for printing in flexible filament! This is a cap for a square Ruko key - print it in different colors to easily tell your keys apart. Here printed on an Anycubic Kobra 2 Pro in generic TPU 95A in White, Black and "Natural".
Cheap Chinese plastic calipers that turns on automatically has a tendency to turn by itself when it is placed in a drawer. For that reason I designed this cap, that fixates the jaws of the caliper in place, so it can't move and hence can…
Spare part for a 10 years smoke alarm where a tab on the base has broken. The smoke alarm is made in China and was sold by Danish company "Harald-Nyborg". The diameter of the base is 91mm, the inside distance between the tabs is 80mm…
This is an add-on for the suitcase handle in https://www.printables.com/model/825419-suitcase-handle. The function of the plate is to go inside the suitcase for stress relief, if you mount the handle on a suitcase which originally did not…
This little converter makes it possible to use a travel case meant for Oral-b PRO4500 (Triumph/4000/5000 as well) for the Oral-b Pro-3 3900 (and probably the other toothbrushes in the Pro-3 series, at least the pro-3 3000 series). Simply…
Enforcement part for "The100" v1.1 printer. I had trouble with the bed leveling being bad, even if I just leveled it just before I printed. After a lot of tries I finally realized, that the printer pressed apart the frame at the front as…
Cheap Chinese plastic calipers that turns on automatically has a tendency to turn by itself when it is placed in a drawer. For that reason I designed this cap, that fixates the jaws of the caliper in place, so it can't move and hence can…
Small and fast printed holder for the Link380 USB adapter that comes with the Jabra Evolve2 65 headset. After printing it, slide it over the headband base from the bottom of the base and to the position you fancy. Then press the Link380…
I needed a holder for an Ambrogio power supply for a robot lawnmower, so I designed this simple model. The power supply measures 180x60x35 and can be seen in the second picture. Ambrogio also makes or has made robot mowers under the names…
Very small a fast to print thingy that makes the wire that is attached to a J-hook stay in place and not slip from the small eye into the clip area. This particular thingy is made for a J-hook that measures 2.5mm x 4mm at the smallest…
The Philips HD9280 is a nice air-fryer, but it has, in my opinion, a single stupid design fault: In bright light it is impossible to see where the touch-keys are located as the brightness of the light in these keys, are very very low. To…
Case opener for the Jaguar J809 watch. Even tough the small dimples are small, they can sustain a lot of torque force, as they are very short. Here printed in Kingroon gray PLA using the default profile (0.2mm layer height, 15% infill, 2…
When I assemble electronics, e.g. attaching a PCB to a mounting plate, I often miss a small nut tool as a wrench often is to big and to clumsy to mess around with. Hence I made this small set of small finger nut tools, that helps out with…
These are all currently available results.
