184 models
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
You'll most likely want a mix of files for your exact needs. If you're using a 48-22-8436 5-Compartment Low-Profile Compact Packout , you can fix 3× Slim Long Bit Bins (or a mix of half-width bins) If you're using a larger 48-22-8431…
These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…
This is the tool file provided by Bambu Lab copied to Printables. Instructions here https://wiki.bambulab.com/en/x1/troubleshooting/extruder-clog
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
Lots of files! You'll most likely want to print something similar to this: 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top) 1× Intermediate-Bin (This goes on the bottom) Various bit holders: 4×…
Lots of little changes for a better print! See below for a list of edits. Includes a 3MF file for Bambu Studio. The arms have a ball and socket and can be posed in lots of directions. Arms and one-piece skull print with supports.…
Bendy train track for non-standard curves
Polymaker Matte PLA Filament 1.75mm Army Red is a good color match for Milwaukee Updated 1/20/24 - removed a small hole artifact from the middle. Thanks to @MatthewSlay for the heads up. Also added a STEP file
Want a skeleton all in one go? This one-plate print will get you there. Only the skull needs supports. The rest attaches with glue and 1.75mm filament as a peg/joining system. The face prints without supports and snaps right into place.…
Printed with PLA 3 walls @ 20% infill. No rafts or supports needed.
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
Single sided since it can be rotated to fit any orientation. Easy to print. Double sided version because it feels right that way. Print with supports/brim.
Fits this fridge: https://www.printables.com/model/72701-fridge-with-doors-that-open-and-fridge-props
This is a replacement handle for the Milwaukee compact organizer that accepts an interchangeable label. The handle works the same way as the original handle — it locks in both the folded and extended positions. The label slides into a…
The box consists of a customizable lid and base optimized for the Wera Tool Check Plus. It is closed with 2 clips and uses 6x 30mm M3 bolts. Print gasket in TPU The top inlay file can be edited to hold other tools. Also includes TPU Seal:…
Edited remix of a great parameterized rugged box using OpenSCAD Waterproof when using a TPU gasket Uses M3x 30mm screws by default - two for each clip. Amazon link (Or other sizes, customizable) No nuts required, uses tapered holes…
Inserts for the following models Classic: Gen 3, Gen 4, Gen 5, Gen 6-7 Nano: Gen 1, Gen 4, Gen 5 Shuffle: Gen 1 Mini: all Compatibility The 30gb gen 5 / Video adapter is compatible with the thin back Gen 6/7 The 60gb gen 5 / Video adapter…
A simple wedding ring, USA size 8. Scale it up or down for your fingers. Designed to be low profile on the finger.
Print in place rotating handle allows a tight grip, it rotates in your hand.
The X5 measures 46 x 124.5 x 38.2mm The X4 is 46 x 123.6 x 37.6mm
Includes SAE and Metric files. Also a painted 3MF for Bambu Studio
Bins can stack and still fit inside a closed packout. Print standing on the side with a brim. no supports needed The lids swing out of the way when not in use. The normal version goes from the front and latches on the back, longer lip…
Holds an x-acto knife point-down without a cap for easy grabbing! Optionally holds this blade holder: https://www.amazon.com/gp/product/B00004Z2U0/
Stove model is here: https://www.printables.com/model/422482-dollhouse-appliances
Skull prints with supports on it's back side. Face prints flat on the printer bed without supports. Much easier to get good results vs the other designs. Pieces should snap right into place. Use a drop of glue if needed. Play with X-Y…
The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…
Prints with minimal supports, everything should fit together without glue Studs fit perfectly with these coins: https://www.printables.com/model/293097-giant-lego-like-coin-101-scale/comments
Print model in PLA and plug in TPU
The photo above shows the oven The fridge in the photo is from here: https://www.printables.com/model/72701-fridge-with-doors-that-open-and-fridge-props
Based on a great model and series of remixes. This one increases Jupiter to the maximum print size for a Bambu X1C and scales the rest of the planets from there. I also added Pluto, various stands for each planet, and ring connectors for…
Individual STL files as well as Bambu Lab 3MF file enclosed. 4x4 holders are the same size as the original plates. 5x4 increases by one square. Removed PLA Tough Also included a STEP file for modifications
Fits this doll house: https://www.amazon.sg/Small-World-Ryans-Room-Wooden/dp/B00008XL3S Print files on their sides (railing down) with no supports. Use the split files and glue them together with the small support pieces. Or print all in…
Printed in PLA+. For the fan I printed it on its face using Support W as an interface material. You'll need two bolts and some washers and nuts to assemble this version. Here's a video: https://vimeo.com/860332009/291d8b5e1e?share=copy…
Fits Milwaukee PACKOUT 5-Compartment Small Parts Organizer I included single piece files as well as a version cut in half with 4mm bar inserts to help hold it together when glued. Also works well with this single bin if you'd like to do a…
Updated for 2025 here - I like this version more: https://www.printables.com/model/1127275-yoto-card-holder-v2-round-edges-friction-fit-lid ---------- If your printer supports multi-filament printing load the 3MF file, otherwise you can…
The original case has a great interior, but I didn't like the exterior, hinges, and clasp. This version retains the dice holder, guide, and adds holes for 8x3mm magnets. The top of the case can easily be customized with text. Painted 3MF…
Remix of the Bambu Lab X1C plate holder to work with Gridfinity. Uses 1x7 grid spacing and has magnet holes
Fun print! You should be able to get about 87% scale to print the helmet in one piece on a 256x256 print bed like the Bambu X1 I originally printed at 90% split into pieces but it was too large for 6-year old's head. The reprint at 85%…
Fits these well: https://www.harborfreight.com/hand-tools/specialty-hand-tools/picks-hooks-tweezers-probes/pick-sets/mini-pick-and-hook-set-63697.html https://www.amazon.com/4-PC-PICK-HOOK-SET/dp/B00AOGGEYG/
Tall cups that use vertical Wall Control pegboard slots
Based on the wooden model made by Tern. More info here: https://maxelman.com/tern-gsd/ Includes a 3MF file for Bambu Studio Also includes the optional ornament hanger piece that replaces a center peg. Similar scale and design to my other…
Multiple versions with separate files for easy printing
Bins can stack and still fit inside a closed packout. Print standing on the side with a brim. no supports needed The lids swing out of the way when not in use. These do NOT fit the tall rectangle bins. Note: The middle print has a small…
Resize in slicer. I use 150x150x20
Prints well in PLA with no supports on a Bambu Lab X1C V3 / V4 Update 3/2/23: I added two more versions to keep tweaking the downward facing ramp issue. I'd suggest printing one each of V2/V3/V4 to decide which works best for you. V2…
Includes painted 3MF file for Bambu Studio
https://www.benchmade.com/products/535
Example STL included for 50mm binocular filters. See remixes for more examples.
The slope relies on standard "D" tracks (straight, ~200mm long). Slope angle is 15deg, slope radius is 80mm. Reuploaded from Thingiverse with separated files for easy printing
A holder for 6 IKEA 365 lids. May suit others. It is designed to be fed from the top when placed in drawers.
Tested and working, however the fit is very tight. Ideally the cover is reduced slightly to allow an easier fit and removal. Requires 2× M5x15mm bottle cage bolts Printed in PLA on a Bambu Lab X1C
This is a FOUR ring fidget spinner
Holds 30 cards per slot, 150 cards total Lid slots on securely OpenSCAD parameters:
Replacement treasure figurines for the game Forbidden Island: Statue of the Wind Crystal of Fire Ocean's Chalice Includes 3MF for Bambu Studio
I wanted LED lighting on my X1C but didn't want another plug. By powering off of the AMS I can use a single smart outlet for the whole thing. Works great! Use this box to bundle wires behind your printer and power lights directly from the…
Fits this kit as of May 2024: https://www.amazon.com/gp/product/B082ZG8FS7 These adjusted files better fit the neck and electronics box. Otherwise you'll have issues with both. Highly recommended you print the small 25g neck-fit test…
Painted 3MF file included for Bambu Studio. Currently set up for multi-material printing - the STL files are the same height. If you need multiple heights for a single color printer you can scale the height of the STL files. For example…
This pinhole projector will allow you to view the eclipse during the partial phase. As the light passes through the hole
Based on the Larry vs Harry Bullitt cargo bike. Has a kickstand and snaps together without glue. Similar scale and designs to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75 Riese & Muller…
You may need to adjust the scale for a perfect fit I printed 4 versions (100% 100.5% 101% 101.5%) to find the best fit at 101% for my 35mm lens Printing suggestions: 6 wall loops Variable layer height / smooth layers Automatic bridging…
Includes painted/text file for Bambu Studio Available on Etsy
Print with 8% supports EVERYWHERE. This will allow the small clip overhangs to be supported when printed. These come out clean and easy!
Holds a lot of cards! (80 or so) If adding a name in a slider and using multi-material printing, it's best to lay the holder on it's back side.
Take your Makedo cardboard construction to the next level! Insert the Scru-Bit into your cordless electric screwdriver for fast, easy Makedo disassembly. Disassembly: When it comes time to take down a large Makedo cardboard creation, such…
Based on the Urban Arrow bucket bike. Has a kickstand and bucket integration to hold together without glue. Similar scale and design to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75…
Wall Holster for Bosch eBike Battery Charger 36-4 / Tern GSD. Has 4 mounting holes, you can choose which work best for you.
A pocket-sized threaded capsule container that holds everything you need to play a game of Yahtzee: 5 dice, 4 golf pencils, and several score sheets. Dice and pencils stack into a column built into the lid. Score sheets roll up inside the…
Same as this paid tool: https://www.ebike24.com/enviolo-shift-cable-gauge Painted 3MF file included for Bambu Studio Used on a Tern GSD
Also for sale on Etsy here Pop the old knobs off with a small flathead screwdriver. These snap into place. Included STEP file for minor edits. Printed with a .4mm nozzle with .08mm layer height. May also work well with a .2mm nozzle!…
Works with a universal magnetic phone mount for the tension nut and magnetic base. The ball is 17mm diameter. You will also need a M4 machine screw to tighten the clamp.
Designed to hang MITUTOYO 500-196-30 on a Wall Control pegboard
Tested and working on Brio train tracks. Both female and male ends have been tweaked to fit. Track is reversible (tracks on both sides) since it's asymmetrical.
Easily figure out vertical spacing 250mm below an existing bracket
"This is a collection of many different marble tracks compatible with Marbleworks Grand Prix marble set, for which getting replacement parts is difficult. Additionally there's a bunch of new designs cooked up to make more creative marble…
As an add on to your Makedo cardboard creations, use the Hook-Bracket to hang curtains, hang up signs for your cardboard restaurant, and more!. Each Hook-Bracket is supported with 2x Makedo Scru's. And can be used in conjunction with the…
Two sizes: 33mm is for the smaller top tube of a Woom 4 45mm is for a Woom 1
Based on the Riese & Müller Load 60 cargo bike. Has a kickstand and pieces together without glue. Similar scale and designs to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75 Riese &…
Quickly draw guides to cut perfect cardboard circles and arcs! With the Makedo laser cut Rotate-Template. Each Rotate-Template is supported with 1x Makedo Scru. And can be used in conjunction with the Makedo Scru-Driver, Mini-Tool, and…
It's a very tight fit depending on your printer tolerance - I had better luck printing at 101% size, a tiny increase.
Removed the logo for faster/cleaner printing
Based on the wooden GSD model made by Tern. More info here: https://maxelman.com/tern-gsd/ Comes with a side kickstand and a sidekick/dual kickstand option. Also includes the optional ornament hanger piece that replaces a center peg.…
Included Bambu Studio 3MF file with a bunch of color options
Based on the Riese & Müller Load 75 cargo bike. Has a kickstand and pieces together without glue. Similar scale and designs to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75 Riese &…
Quick screw plug for the Step2 Splash & Scoop Bay water table. Based on a cooler plug.
Slightly larger screw head hole. No logo.
Look at eclipse shadows!
For sale on Etsy here Pop the old knobs off with a pipe wrench covered in electrical tape. Squeeze and pull upwards/away from the Yoto. These replacements snap into place and are easier to swap back and forth. Included STEP file and 3MF…
Holds the small 50ml bottle of Nano Polymer - Full and Half height options
Thanks to @Josh3d for the files. Reuploaded from MakerWorld This is an adapter to help fit cardboard spools on the Bambu plastic spool holders, for use with the AMS. It has a few key differences over other spool spacer/adapters I've seen.…
Includes alternate with Analogue logo Originally remixed when source file was Public Domain
Can be used with double sided tape to mount the charger to a table, works well!
You may need to shrink the dividers. I scaled them from 1.5mm thick to 1.2mm thick Also for sale on Etsy here
I didn't like the included holder, so I made this centerpiece for the DDD system. This is the set: https://www.parktool.com/en-us/product/sliding-t-handle-torx-compatible-wrench-set-tht-1 I also made little label tops for the set here:…
This is a stand for the Water Rises counter in Forbidden Island. It fits in the box with the tokens
Replacement full height / long PCIe bracket mount for QNAP Dual Port 10GbE SFP NEC
I didn't like the included holder, so I made this centerpiece for the DDD system. This is the set: https://www.parktool.com/en-us/product/sliding-t-handle-hex-wrench-set-thh-1 Note that I didn't include a slot for the largest 10mm size. I…
I created a printable badge for the Eclipse Explorer Junior Ranger Program from the National Park Service. Glue a pin backing on like this . Designed for a multi-material printer with 2 colors. Print with a .2mm nozzle for best results…
A small cap to use in place of the large reservoir
Fits 6 NPS badges well including: Eclipse Explorer Junior Ranger Badge
