Counting matching models…
Other hex bit holders that I have tried were too small for all my miscellaneous bit's widths, so I have made better holders. These models are for hex bit holders which have larger 6.6 mm, 6.7 mm, 6.8 mm, and 6.9 mm hex bit cutouts. I am…
This is a rugged Apple AirTag case. It is meant to be stowed inside gear or to be mounted with 3M VHB Mounting Stickers. It is designed to either use the included printed seal gasket, or to purchasable o-rings gaskets. 3D Printed Gasket…
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
This is an adapter for the Festool Domino Joiner (DF 500). It uses the CAMLOCK connector by @PeterH . Related: Festool Domino Cutter Rugged Case https://www.printables.com/model/710716-festool-domino-cutter-rugged-case CAMLOCK Adaptors…
These are cute little boxes for the Festool Domino DF500 and DF700 cutters and wrenches. They are remixed from the awesome Rugged Box (Parametric) designed by Whity . Update 2024.10.30: Added 3 mm and 4 mm wrench slot options for the…
These are suction-end nozzles for the CAMLOCK connector by @PeterH . There are lots of sizes that can use to suit your needs. The nozzle name format is (end-depth by end-width by end-angle) so the 20x80x60 named nozzle has 20 mm depth, 80…
A vertical wall mount for the MICROJIG GRR-GRIPPER 3d push block.
This design is a Festool track sled for the Dewalt DCW600 and DWP611 compact routers. For your measurements, the center point of the router bit to the edge of the track is 69.25 mm or 2 ²³/₃₂ inches on the design. Verify your actual…
This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
This is an adapter for the Festool Plunge Cut Track Saw (TS 55). It uses the innovative CAMLOCK connector by @PeterH , along with the jcjames_13009 version of the Festool end connector . Related CAMLOCK Adapter: Festool Domino CAMLOCK…
Since I like my Pica pencil with the holder, I wanted the same concept for my NicPro Mechanical Carpenter Pencils. There are two versions. Clip Sheath - This design has a sheath for the pencil clip to slide into. It is sightly longer than…
These are vacuum nozzles for the CAMLOCK system. A few select sizes. The nozzle name format is (end-depth by end-width by end-angle) so the 20x80x60 named nozzle is 20 mm deep, 80 mm wide, with a 60 degree end. 20x20x45 20x80x60 30x60x30…
This is a 1x2 Gridfinity bin that holds the Wiha 40010 Magnetizer Demagnetizer. It is standing to keep on the desk and ready to use. It only takes up 2 grid units. If you are not using the Wiha 40010, this model will fit another…
This is a new version of the popular rugged Apple AirTag case. It is meant to be strapped onto backpacking, hiking, and urban gear. This version has Backpack Strapable Tops for 20mm and 25 mm webbing straps. It is designed to either use…
A simple gridfinity base that holds four sewing thread spools
This is a 3D printed version of the KM Tools Card Scraper Vise and Honing Guide as described in their downloadable plans and YouTube video “ Card Scraper Sharpening Jig - Gorgeous Shavings - Free Plans and Free Hardware.” with an…
This is a simple clip for the Field Notes Memo Book combined with a Pigma MICRON Pens. The clip is made for the 48 page Field Notes Memo Book. The memo books and pens can be found at your local art supply store, or via Amazon: SAKURA…
A Gridfinity bin for the Porter Cable Router Template Guide Set. The set is the 42000, and each of the guides have the cooresponding ID etched into the hole. The gridfinity bin is 4x2. It is for the PORTER CABLE Router Template Guide Set…
A complete library of printable spacers for woodworking projects. Includes configurations covering material widths from 3/8" to 1" (imperial) and 12mm to 20m (metric) with gap sizes up to 1/2" (imperial) and 12mm (metric). Perfect for…
A multi-use stake that can be used for many things in the garden. Use it to hold plant ID cards, sticky bug traps, and many other things. Size it to your needs in the slicer.
This is a little LED Grow light holder. I made it to fit the post for these little 5V LED lights found on Amazon (affiliate link). This is an excellent setup for your unlit desk at home, or that dark space at your work.
This is for those random things like the shown Black & Decker Bit Mini-Case. It is a 2 x 2 unit and has a height of 2 units.
Mount for the QuinLED-Dig-Quad V3, providing table-top use, IKEA Skadis mount, and screw mounting. Comes with four pegs for table-top, or a antenna mount in place of a leg peg. You can use the IKEA SKADIS Universal Hook from the…
This is a simple mount for a RaspberryPi. The case I made this for was designed by @Squirrelbrain , listed below. You can use is anywhere else you want a simple mount for those cases. I used 2 M3x10 screws with nuts to attache to the…
This is a taller top for the Jiffy Seedling Planter by pohukai , who remixed the files from the tcp_j design on Thingiverse model . There is a 60mm, 80mm, and 100mm.
This is a SKÅDIS Ship Lap Wall Plank. It was for 9/16" x 5-¼" plank.
These are all currently available results.
