Counting matching models…
Few Different Sizes to Pick From Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #6 (0.56mm) swap to Red At layer #16 (1.36mm) swap to White for the rest
Simple 4 Inch Duct Interface plate. Originally made to create a Tee box for printer exhaust ducting.
Various parts to make your own automatic pet feeder (dry food). Print instructions Attach this to some 2" PVC Pipe (Or print it!), the bottom of a food box, and raspberry pi to automatically feed your Pet. Some small screws and CA glue…
A Pi Pico 2040 case for those using a Pi Pico + ADXL345 as a portable solution for doing Input Shaper measurements with Klipper. Can accommodate 6 wrapped wires or a Cat 5 cable going out to the ADXL345. Dimensioned for PLA. Scale to…
Deadpool Love via HueForge Not super happy with detail around the Thumbs. 200x155mm Print at 100% infill with a layer height of 0.05mm with a base layer of 0.15mm Filaments Used(ABS): Polymaker Dark Grey Transmission Distance: 1 Polymaker…
Hueforge: Ghostbuster's Slimer Multiple Sizes Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #12 (1.04mm) swap to Green At layer…
An inside joke really, but it works. Added a small base to add both height and weight that is compatible with the Prusa Balance game by David Warboss https://www.printables.com/model/633194-prusa-balance-game I am using the storage base…
Dust covers for Hydraulic Quick Connectors found on John Deere Subcompact tractors. The factory dangly style covers tend to get ripped off / lost. Fit ISO 5675 ¼" AG Quick Connectors 1025R 1023E, others(?) The Female Boot needs to be…
3D Painted Optimus Prime using HueForge -- HueForge Describe -- Print at 100% infill with a layer height of 0.05mm with a base layer of 0.15mm Filaments Used: Black Transmission Distance: 0.3 Azure Blue Transmission Distance: 3 Steel Grey…
Top Mount Spool Holder for Voron printers with 2020 Extrusions and top Acrylic Panel. As-is orientation is for the right side. Use slicer mirroring to flip the Front and Back brace parts for a lefthand orientation. Depending on your foam…
A few options to support the flying gantry on a Voron V2 - during building or maintenance. Sure a box or beer can works, but options are good. MGN9 Bracket Mag - My favorite - super quick print and pop in a 6x3mm magnet. Works with any…
Keep nozzles handy, organized and out of the way. Mounts to front 20x20 extrusion with two 8mm M3 and t-nuts
Just an elevated tapered base for the original model. Makes it a little easier to scoop out the dispenser bowl You can add weight to it if you like (Infill, modifier, etc.) Three heights to pick from - I like the 60mm best Use an…
A 2020 Extrusion mount for the inexpensive Amazon Hygrometer (Link Below). Makes for a convenient way to see the Humidity level in your Box Turtle Enclosure. Bom Printed Part (2) M3x8 SHCS (2) M3 Hammerhead to roll in T-Nuts Hygrometer…
My twist on a simple tool to help get square cuts on PTFE tubing. Firmly holds the tubing where you want to cut it. Has a stop ledge to help control the knife as it cuts through while being guided by the tool face. Simple two piece design…
When “Good Enough” is OK and you need to measure something your caliper can't accommodate. Extended Jaws for Kynup cheap Amazon Digital Caliper. 75mm and 100mm versions. Print these jaw down, on a smooth build plate. When installed they…
The original Hexagon based model is a retraction test and huge time consumer. This one prints in less time than both original options and doesn't need any supports when printed as pre-positioned.
I needed a relatively strong clamping for some materials which could be removed or adjusted. Designed for 12mm hole(½") and up to roughly 8mm of clamping Print as oriented for max strength. Optional 36mm x 1mm washer if you need more…
Dry Erase Marker Holder for UBrands Medium Keep them handy / close to point of use Apply 3M Command Strips for sticking to the wall, or 3mm Magnets for metal surfaces
Case to hold Self Centering Drill Bit set from Amazon here (not affiliated): https://www.amazon.com/dp/B0032U9MAO Four: 3x6mm magnets Two: M3x20 for hinges CA Glue to hold in magnets
Another custom electronics enclosure for the RatRig v-Minion Stack a Pi on top of the SKR Pico with some 10-12mm standoffs and put it in a box. Designed for UART Pi to SKR connection Add your favorite 4010 Fan, a few spare M5 & t-Nuts to…
Keep your AB drive tensioners parallel and belts running true / centered on the idlers. The rev 1 style AB drive tensioners have the tension screw offset from the idlers which can lead to the idlers not running true with the belt path.…
Top Mount Filament Runout Sensor Designed this for my Voron 2.4. I use a top mount spool holder feeding down the back of the machine. See my other designs for the spool holder. Designed for a Roller Microswitch / generic Omron SS-5GL2 -…
Clean larger surfaces more quickly with this friction fit wide end attachment for Wyze Vacuums. Two options: One mostly straight out angle and one curved. Slides directly on, no modifications. Put some organic supports under the last 2cm…
8 Well Magnetic PCR Tube Rack Designed to press-fit ¼" x ¼" Magnets: https://www.kjmagnetics.com/d44-n52-neodymium-cylinder-magnet. Do a partial test print and adjust your flow rates as needed or optionally use glue. The model is…
Leather Pirate Flask The halves are not 100% symmetrical - so print them both. Model is roughly 5" tall and 1.5" thick. Dimple on some black craft paint for the stitching and add a leather shoelace! Filament: Polymaker PLA Pro Bronze
Wall Mount for Porter Cable Model 390 Sander
A Print to protect and insulate the thin walled recyclable aluminum cups. Keeps drinks cool/warm - protects your hands and protects the delicate thin wall cups so they can be reused! Print in various colors to help identify who's cup is…
Lots of these out there alread - more of a fun exercise for me to design my own. These handles are great for squeezing into snug places or maybe just convenience. There is a 2mm recess in the bottom of the bit slot for a 6mmx3mm magnet to…
Eva3 8mm stock probe mount has an internally installed Nyloc nut which can be difficult to install and arguably unnecessary This removes that in place of an external M3x5x4mm heatset with thread into plastic bore for holding. There is…
Williamston Vespidae Robotics Team 7818 Logo Coin Willie Logo used by permission of WHS Designed for multi-color - import as one object
Nitehawk-36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger w/Tap Clearance for the Optotap PCB is tight but available 3 Points of attachment to the toolhead Designed to work with the stock Stealthchanger backplate Printed Parts…
These are all currently available results.
