Counting matching models…
This model changes the 20x6x2mm magnet slots to fit 3/4 x 1/4 x 1/8 inch magnets, such as these from TotalElement . The tolerances are a bit tight in some magnet slots, so you may need to gently tap them into place w/ a hammer. NOTE:…
Motivation I wanted to add a power hat so that the raspberry pi can be powered by the 24V (or 12V) rails from the Prusa PSU. This allows you to connect a raspberry pi to your Mk4 printer without a separate usb-c power wort, reducing cable…
This model changes the 5mm x 5mm circular magnets to using 3/4 x 1/4 x 1/8 inch magnets, such as these from TotalElement . This model also integrates the magnets inside the parts of the cover, instead of using a friction fit. Make sure…
This model lets you add a USB-C port to the PSU Cover of your Prusa Core One/+. Print Settings I used PETG 0.20mm Structural 15% grid infill BOM Tools: Crimper Soldering Iron + Solder Materials 1x CKCS U1E Board ( Amazon ) 1x ATC Fuse…
Unifi LTE Backup (Pro) Magnetic Mount A basic 3d print for magnetically mounting a Unifi LTE Backup Pro. I printed this in PETG, but other materials should work as well. Additional Materials: M3 x 3.0 Threaded Inserts Qty: 2 Link:…
Motivation I broke the front panel of my KK12 Kalahari Khabu Biltong Boss box. I designed this compatible front panel, housing for the PCB, and bezel. The design replaces the self-tapping screws KK12 uses w/ M3x10-ish machine screws and…
This model lets you add a 24V Anderson Powerpole plug to the PSU Cover. Print Settings I used PETG 0.20mm Structural 15% grid infill BOM Tools: Regular Crimper Powerpole Crimper Soldering Iron + Solder Materials 2x Powerpole Terminals +…
Mostly copied from original project: Magnetic cup for holding pens/pencils/tools/whatever else! Printing Instructions I printed the model w/ Prusament PLA and AmazonBasics TPU. Print upright. No supports required. Don't add too much…
These are all currently available results.
