Counting matching models…
This took a while and a lot of filament to get right, and I’m posting it for free. If it has benefitted you (OEM wing mount is $17!), please consider posting a make or buying me a beer to say “thanks guy!”. Anything is much appreciated.…
My wife purchased a starter set of the Stasher reusable silicone bags. However, they are difficult to dry because they need to stand up slightly open, and due to their thickness they tend to fold in on themselves and close, leaving…
UPDATE 1/8/25: It appears I uploaded the older version of this bumper. There is a newer version that has been reinforced with more connective material towards the flex point that should prevent any eventual tearing. This is now uploaded…
The mounting system that was used in the model I remixed worked pretty well except for two key issues: I have a Raspberry Pi Camera Module V3, and the camera case is circular which seemed to be cutting off the camera's ability to focus. I…
Rather than printing a whole new set of wheels, these sleeves fit snugly over the stock tires and turn your Typhon Grom into a drifting machine. They're 3mm thick and last a very long time. I recommend printing in PLA or PETG. I used 4…
I built a second set of wheels for my Promoto and realized I'd have to buy a brake rotor to complete the look - but it doesn't actually do anything except make it look more realistic! So here ya go - it's a Promoto-compatible rear brake…
I recreated these mudguards based off a set I purchased, with some small tweaks and added Arrma branding. The Arrma ‘RR’ model was borrowed from https://www.printables.com/model/114281-arrma-logo-multicolor You will require 6 screws to…
I had a TPU wing on my Kraton 4S but the screws ended up pulling through the mounting holes. This piece connects the two screws to prevent against this happening again, while allowing me to still use the wing with the widened mount…
Getting tangles in your yo-yo is not uncommon - but bearing knots are the worst. In the past I've used a toothpick to pull these out, but when your yo-yo string gets “crossed” under itself, a hook shape can help to pull it up and un-wedge…
As a longtime fan of the Fallout series, I wanted something cool for my Capra that matched the Fallout blue and yellow color scheme. I found the fantastic panel designs by Mh2241 , which I was able to get into Fusion and remix using other…
Update 10/26/23: It was brought to my attention that the original design did not fit the 81t spur which is included with the slipper and center diff. I redesigned the cover from the ground up using Fusion360 instead of TinkerCAD and…
While installing the Hobbywing 16BL30 combo in my Typhon Grom, I couldn't figure out how to organize everything while still being able to lock the body in place. I run short CNBL 1500mAh packs so I don't need the entire length of the…
I needed extended body posts so I could get a nitro truggy body to fit on my (electric) Kraton 4S V2. The new body I purchased had some interesting cut lines that made it difficult to get the body clips to go through in the rear (due to…
Broke the stock and the price to replace was 2 bumpers for $7. Print in TPU for a virtually indestructible bumper. For best durability, print in TPU or PETG, although PLA+ has lasted a long time as well. Print in an upright orientation…
I really liked this stand and printed a few for myself and my friends. One of them requested I put shock holes in the body to hold during rebuilds, so that's what I did.
I finally made the mount I've been wanting to make for years - the "driver hanging out the window" perspective! This will fit basically all GoPros that stick to the “standard” GoPro shape, but I designed it to fit a Hero 7 Black, but with…
If you've bent a driveshaft on one of your rigs, bending them back is an easy way to save some money. You can use a hammer but it's less than ideal, and there are straighteners out there but they cost a pretty penny. The best method I've…
I broke a rod end, and since literally no one has them in stock for months I was forced to roll my own. These thread on very snug and have survived several runs with lots of high jumps, virtually zero issues. I have printed these in…
If you use a deodorant stone, as they are made out of mineral salts, dropping one by accident will render the stone jagged at best, or completely broken at worst. Since these things are supposed to last 10 years, why not make them easier…
This directly replaces HomeLite part # 529293001 , which is used on various older Ryobi mowers and snowblowers to lock the handles in place when extended.…
This is a simple replacement battery strap for the non-Elite version of the TLR 22X-4 kit. It is intended to be printed out of TPU. The print settings are very important so that it stretches like the OEM rubber strap. Print settings: 1…
One of my nylock nuts came loose somehow and I lost the spacers that come with the rear hub package ( part number TKR6576 ) . This replaces them and they fit like a glove. You will need two of each direction, so either use the 3mf file or…
These are all currently available results.
