Counting matching models…
LIGERO69 plus. It's based on REV.E original Ligero, left untouched but some small changes were done to simplify building for those who do not like nuts-in-slots assembly upper lip is fixed with 3X SELF TAPPING 2MM flat-head screws. Lower…
CHAISE LONGUE LE CORBUSIER LC4 FOOT REPLACEMENT just like the original, with its foot curvature Category: Replacement Parts
I printed in petg and pctg 0.3
Simply a lenscone for the Open 617 camera project. This will allow 90mm f8 Super Angulon on the camera our friend Velvia prepared for us.
The frame is printed in PLA with 0.15 resolution (sunlu matte black) while the lock is printed in PETG, because of small walls and mechanical needs. With my printer the frame is a snug fit for the focusing screen, The walls are tapered…
godox-bowens base connector Category: Camera
These are the model and the fusion360 source. It works quite ok… It's a shell, overengineered and occupying a lot of space for a cheapo 0.45x optical addon. It's made for Velvia's 6x17!…
Aaaah, now it's complete.. overengeneered, overcomplicate and hard to print. 7 parts, aerodinamic, fins and boosters, names and numbers. I plan to tear it down and do a proper paint job one day, Warhammer 40k style. No serious…
This are DIY knobs for Edgar Kech's wonderful camera. They fit the 4X5 Scalable Field Camera ( https://github.com/edgarkech/scalable_field_camera ). Surcing knurled bolts can be tricky, they are too small and not adapt to my finger. I…
90mm viewfinder on 6x17 panocamera , only 3 pieces and one screw. Print it better than I did please! First, insert the optical 0.45x wide into the body, the ass has 30.5x075 screw, and must be screwed in now. Previously break in the…
This is a connector for a Manfrotto 200PL tripod head to an Arcaswiss clamp WITH ARCASWISS MALE DOVETAIL IN THE BACK. It was made with in mind the use of a simple tripod head like 128RC and a camera that's just been removed from a modern…
Replacement handle for Samsung trolley. Not sure about the model. Print PCTG or PETG, outer screws M3 with hot iron inserts, the 2 top screws are forced in, M3 round head. see pictures and modify x your own Category: Replacement Parts
I needed a carabiner to easy mount and take off caps with a little cord . Had to be small. Please print in PET or PETG or similar filaments that allow flexibility and spring effect without breaking. There are also 80% and 75% versions,…
10.5mm Fisheye Nikkor cap for removed hood-FX modified lens 10.5mm f2.8 Fish Eye Nikkor is one of the most used lenses for taking 360 VR panoramas in a few shots. Especially when using FX sensor cameras. In this case, you have to remove…
Linhof M679 cc bellow frame Category: Camera
Loupe magnifier from darkroom enlarging lens. I modeled it over a Componar-C 3.5/50mm enlarging lens. It should be printed with a -0.15 horizontal expansion in order to make the thread work. Loupe-focus: to be printed in black or…
This rig adds various mounts to the splendid small Kandao Qoocam fun and allows it to be separated from the phone and operated via a USB-C extension cable. 360 videos are super fun, if you can separate the camera from the phone you will…
Project HOOD! This is the third test print. Trying to make a print-in-place collapsible hood. The idea is to remove the object from the plate after pulling in the shafts of the hinges. beware, it is still lacking: 0: the super important…
it's only the inner rotule, changed to support a 3/8 x 16 screw, to convert these wonderful LARGE AND STEADY feet for tripod use. https://www.printables.com/model/309201-supports-for-skywatcher-eq6-r-pro-mount all the glory goes to the…
MCP_03 is a compact panoramic VR head for small cameras and for phones. It will allow you to take 360VR photos while keeping the lens on the no-parallax point while rotating. M Mobile Micro Mini C Compact Camera P Panoramic head Portable…
Ladies and gentlemen the F*CKLEVEL, A real must-have NECESSORY for your day life photography. When what you want to say is "No, I don't want to take pictures of you, I'm only interested in the pile of trash behind you, so hurry up and…
The PANal PLUG is a beer/bottle cap 360 camera holder. This was made NOT to drop your camera on the pub table or into the soup when taking party / food / drink VR360 pictures with your camera during PanoTools meetings, IVRPA conferences,…
It's a very simple tool in order to glue a small (1.5 cm circle/1.5cm square) on the top of a chopstick (the single-use ones are ok for this). I needed it to reach in and sand contacts inside a Solari Udine clock. Print on pla 0.2…
This rig adds various mounts to the splendid small Kandao Qoocam fun and allows it to be separated from the phone and operated via a USB-C extension cable. 360 videos are super fun, if you can separate the camera from the phone you will…
For Gitzo tripods, a smaller top disc for small panorama heads like Nodal Ninja Mini. Uses a double sides 3/8"1/4" screw like this:…
These are all currently available results.
