Counting matching models…
Another tool for my watch-repairing friend at http://timeguy.com this parametric OpenSCAD model can be used to create watch movement holders. Included are tested models for 12s, 16s, 17s and 18s movements. All models worked after a small…
I was inspired by https://www.thingiverse.com/thing:446442 but created this version from scratch. It's designed to be printed in two colors with a manual filament change in the middle. It also has a provision for mounting on a nail. The…
I made this two-part floppy drive case because nothing else was quite what I wanted. Read more in this Adafruit Learning System Guide . Shown here with a TEAC FD-55GFR with matching custom front plate with revolution sensor switch (based…
This tray/caddy will hold the Raspberry Pi Compute Module 4 IO Board. The design minimizes material, at the expense of leaving some traces & components open on the bottom. Use 4×M2.5 threaded inserts, such as…
Another "two parts go together to form a cube" puzzle. Best if printed in two colors. Print instructions Orient the model so that the face that looks like a letter "D" is face up, and it'll print without supports.</p> I find 33mm the…
I wanted to make an ornament/pendant version of Ducky, but openscad couldn't work with the .stl file because it wasn't a 2-manifold. I eventually fixed it with meshlab but I unfortunately don't really know or understand the recipe I used…
Many "HUB75" RGB LED panels are provided with some magnetized screws for mounting on a metal backplate. However, I wanted to put mine on the desk. This design holds the panel at an angle, placing the center of gravity in a stable…
I was inspired by the SiCK-68 but wanted a tenkeyless layout, so I designed it from scratch. Here are some other features I added in my design: Case holds plate at a slight incline Threaded inserts are used for the case-closing screws…
Inspired by @chardane on Twitter I set out to make some keycaps for the Adadfruit MacroPad that had excellent shine-through of the LEDs and also made as much of the plate PCB's artwork visible as possible. Unlike @chardane's design, the…
I was asked to design a travel cover for the "Venus" razor. The print shown above actually survived several years travel. The fit isn't perfect, it might be better at 105% scaling or so. The two "jaws" slope slightly in (1 degree); this…
Our pepper mill (William Bounds "WB-1 style") has always been a pain to fill—it has a fairly narrow neck to begin with, but the neck has a metal crossbar that the top threads onto. So filling it meant spilling lots of peppercorns on the…
This food processor doesn't come with any sort of holder or caddy for its slicing/shredding attachments. So I designed a 3D printable option. Each holder requires the following metal parts: 3pcs M4x12mm socket cap head screws 3pcs M4x7mm…
A 3D printable case for the Raspberry Pi 4 with Adafruit's BrainCraft HAT , designed to complement the Learn system project lofi hip hop raspberry pi radio . This is a remix of Guysoft's Raspberrypi 4 / 4B+ case on Thingiverse, which in…
Inspired by Turbo_SunShine's design , I wanted to go further. I've marked this as a "remix", but the openscad and stl files are original -- just the idea is inspired by TSS This experiment shows that if you have a multi-material printer,…
A small PCB tray for use on a desk or table, including built-in feet! The STL is sized for a 2x2 inch board with through-hole components. Modifying the design To modify the X-Y size of PCB, load the .FCStd file in FreeCAD in Part Design…
Every Adafruit board needs a tester to ensure that the hardware works before it's placed in the store. These testers generally consist of a board with a preprogrammed microcontroller to administer the test, and an array of spring loaded…
I used meshlab to find the center of gravity of the model, and then added a torus to the top of the head just above the XY coordinates of the center of gravity. This allows the thing to be hung (e.g., as a tree ornament) and retain its…
This simple 3D print acts as a bumper around the Adafruit MacroPad's base PCB (the one with the Golden Record artwork on it). Print Settings Printer: Generic Rafts: No Supports: No Resolution: 200 Infill: 15% Filament: Any Flex Any…
Ever have the problem that wire just spills off its spool? I had this especially with some spools of wire I ordered from Adafruit, the 8-color "wire wrap" wire assortment (75x30) and the silicone-covered stranded wire (30x25). Enter these…
I designed this case so that I can wear a PyGamer as a badge at an upcoming conference. Don't forget to pair it with the awesome colorful circuitplayground lanyard ! Needs: M2.5x8 socket-cap hex screws (4) Head diameter 4.5mm M2.5…
I made this oddly shaped macro pad to show off how you can use keyboard-layout-editor.com and swillkb's plate & case builder to create custom 3D printed, hand-wired keyboards. Perfect your layout in keyboard-layout-editor.com Export it as…
Print with the front of the display flat on the print surface. Mount the featherwing with 4 M2.5 screws & nuts. The version shown above was sliced with orcaslicer and printed on an MK3s in Prusament Mystic Brown on a hologram build plate…
These are all currently available results.
