Counting matching models…
Walksnail VTX 1s Lite camera mounts adapters Notes Caddx should provide this mount in the product package :-( ... extra mount holes for canopy to choose from (and the center one as well) compatible to 14x14mm and 19x19mm camera mounts…
Printed template for DIY small 868MHz / 915MHz antenna. Total size 26x6mm alternative to 160mm dipole. Use 0.7mm wire to make the antenna spring. Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part…
Frame inspired by TBS Oblivion and Dave_C_FPV "The Micro Oblivion II" The main reason to create frame with support for wider stack mount types and a bit stronger. General notes 3 and 4 inches propellers support for stack 16x16, 20x20 and…
If you like it - please click ‘Like’ and download to support my designs ;-). Using PnP version make sure there is silicone dumpers on both VTX board sides so the board DO NOT TOUCH canopy or screw. If you can use metal nuts (not nylon) if…
CinePUNK 3 (inch) modular cinematic quadcopter frame space for second stack (fpv camera board) easy to repair/print by modularity, limited supports used 16 x M2 screws for assembling (no other parts required to fly this) USB plug…
FIRST THINGS FIRST: Do NOT EXCEED battery specification whet it comes to maximum amperage. DIY 3D components to assemble 18650 LION battery pack for drone (FPV quadcopter, plane, ...). General idea is to have good airflow for battery 4-6s…
3D printed, modular quadcopter frame. General notes Supported propellers: 3.5, 4.0, 4.5, 4.7 and 5 inch Motor mount pattern 12x12 for all except 4.7 inch (this one is dedicated to DJI Spark’s 3x11mm mount type) Supported camera mount…
Universal Walksnail VTX and RX PNP canopy for multiple frames Use ABS other strong material to print, but works fine even with PLA or PETG (it is your own risk and responsibility). I'm using the same Canopy having VTX and RX for several…
BigFoot 9.4" R2 (phantom edition) https://rotorbuilds.com/build/23274 Huge, 9.4" quadcopter frame based on TBS SourceOne and typical racer quadcopter parts. It uses DJI Phantom II motors/propellers because of it popularity and price. I…
Powerwall Glass fuse mounts for 18650 battery case - glass fuse size: 5x20mm, 6x30mm - mount hole sizes: 9x22mm, 10x22mm, 13x33mm - 18650 cases: x1, x2, x4 and x8 Notes - 3d printed holder does not touch metal parts of original fuse mount…
868Mhz / 915MHz Antenna Dipole cover and mounts To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament…
CinePunk Release 3 (3 inch) symmetrical, modular cinematic quadcopter frame dual HD camera support (mounted on front and rear) designed for both: flexible (TPU) or stiff (PETG) ducts versions removable propeller ring to support TPU duct…
Missing part for car windshield wiper replacement. Simplified and working fine in VolksWagen Polo. This is EXPERIMENT - if you will download it let me know in comments how it was usable for you OK ? If you like it - please click ‘Like’ to…
Do not assemble this if you are not an electrician, it is potentially dangerous wall plug device. To minimise risk this project uses standard DIY plug and bulb mount with all necessary tests and temperature resistance. Use GU10 low power…
TBS Source PodRacer Arm Cover Use ziptie or insulation tape to mount on arm. Versions 2023-06-10 v1.0 Initial version If you like it - please click ‘Like’ to support my designs ;-).
Replacement for original metal mount (that does not prevent the remote from turning while mounted). Screw holes has the same pattern as original. Use whatever filament you like.
These are all currently available results.
