Counting matching models…
I don't like traditional flip folders for iPads, which means I have to resort to a dedicated stand if I want to use my iPad as a second screen on my Mac. The issue with many of the printable stands I've found online is that they're too…
I wanted a sturdier caliber holder for the HSW and also wanted less risk of the caliper falling out of the holder if bumped by accident. So I added a raised lip to prevent the calipers from easily falling out. It has a countersunk M3 hole…
I've just got a new iPad and for whatever reason I can only find flip covers to buy - which I hate. Still, I wanted something that could protect my new toy and still offer some protection against the occasional drop. Furthermore I wanted…
This is a remix from the Functional Print Friday's Youtube channel of a cordless battery adapter for a Pinecil soldering iron. Mostly, It includes an XT60 connector built into the part to make it a little more universal, making it a…
A nice and sturdy HSW mount for modern Fluke MultiMeters. Tested to fit both the Fluke 15B and 17B range of meters, but others like the Fluke 101, 106 and 107 should also fit.
A Vertical Solder Spool holder for HSW. Most of the holders I've seen are horizontal and clamp the spool. I wanted something that I could easily take off the holder for when I'm doing soldering work away from my bench. In order to make it…
An elegant looking stand for the iPhone Pro Max series cell phones (12, 13, 14), featuring an opening for your charging cable to plug into. It's sized in such a way to allow phones with protectors to also fit (max width 12.5mm) This one…
A sturdy remix of the stand made by Mabur specifically for the 14" MacBook M1 Pro. His license doesn't allow Remixing for some reason, although the changes I've made are pretty significant in making the stand sturdier for your expensive…
This is a remix for the larger NP-W235 batteries used on cameras like the FujiFilm XT-4 and later. The holder can house 3 batteries. Ideal layer height is 0.2mm - you can choose to print the logo in a different colour should you choose,…
I've always hated the look of the exposed extrusions by the deck panel. It was unsightly and plastic boogers always find their way in there which was a pain to keep clean. I wanted to cover those, but also wanted to cover the gap between…
A TS100/TS101 stand for HSW with additional pockets for the CNC Kitchen heatset insert tool bits. This one should be printed upside down (as oriented in the STL) to allow for the HSW plugs to be properly printed.
A HSW Holder for the popular Build Plate Cleaner found here https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder The original author doesn't allow remixes but seeing as this isn't a remix of the cleaner but a…
A neat holder for the Wixey Digital Angle finder (and similar clones) for HSW
I wanted a more “Industrial” looking case for my 12.9 M2 iMac. I no longer have a bigger 350mm printer so had to design it in pieces to fit smaller 250mm printers - hopefully this'll make it more accessible for more people to make. This…
The original author was kind enough to supply step files, so I changed it a little to get a 6020 fan in there. My drivers were getting real toasty! For the fan cover, I just used the Voron 2.4 exhaust fan cover. Usual thing applies when…
Please see details as per the version whit is remixed from. It allows for the Wireless version of the space mouse to be used.
A holder to securely hold two heavy 123 blocks for HSW.
Chirpy's very popular Dragon Burner toolhead. This is a remix of the standard cowl with some accents. I've added the step and a multi body 3mf file. As per normal in most slicers, you first print the accent (called “insert” in the 3mf…
I made an HSW compatible holder for the Bosch Universal range of IR Thermometers. Nothing too difficult; real easy and quick to print.
I remixed the stand feet for this otherwise awesome design, as the original feet were a little thin and flimsy - especially on the larger stands. I've also scalloped the bottom of the feet so there's less risk of the stand rocking on…
An EBB36 CAN bore mount for an Orbiter 2.0 in a V0, with cable relief optimised for 80mm tophats. I've remixed this from Chirpy's experimental PCB mounts - so check there if he's updated since this model was published. I've made the…
It all started as a quick 5 minute job to mount a cheap RPM counter to my mini lathe. Well, that's what I thought… You can get the 12V version off Amazon here…
Nice and sturdy holder for a Fenix C6 flashlight (or similar size) for mounting on Honeycomb Storage Wall. Inner dimension is 24.5mm so probably suitable for other flashlights as well
I ended up re-modelling the design as I'm loathed to mess with STL's. I run a U2C in my setup so the original was too long to fit. I've re-created two versions - in the original 160mm and in the shorter 140mm. The only thing I didn't…
I run wired networks to all my printers so needed a Keystone jack for the V0 Stealth Skirts. All print settings as per original model of course.
I messed around with HSW shelves for my Ubiquity Flex Mini but it was never secure. Every now and then I would see it had shifted on the shelf from the Ethernet cables shoving it around. So I made a secure casing that'll hold it against…
A Sturdy holder for the Brother E300 label printer for mounting on HSW. For this one you'll need to print 2 additional M3 inserts - making those part of the design would've required too many compromises with supports. Update 13-02-2024:…
I needed a cool looking under desk storage solution and these fit the bill perfectly. I've made. a few changes to the design to suit my use case better, but I'll include the SCAD files where needed to to assist in making changes, The…
Most any machine tools need a thin layer of oil to make sure they don't rust. Problem is, this attracts dust so I designed a case specifically for the modular ER32 collet holders. I've included the Fusion 360 file - All you need is to…
This one is a remix of the original design with dimensions suited to 250-260mm sized build plates. I have this same design on my 300 Trident and 120 V0 and just love it. So no reason not to make one for the Bambu as well! All holes are…
Previously I used an HD tablet mounted against the wall but over the years the battery has swollen up to the point that it cracked the display. I found a YouTube vid by @GreatScott where he reviewed the monitor and immediately bought it,…
Remix of @RedWish 0.2 Full-size Zeropanel mod, but to allow for MGN9 X Rail with Cam locks
I love the original design but I needed something larger as I have an MCEX-16 adapter as well. I didn't want separate boxes for each adapter so remixed it to fit both the MCEX-16 and MCEX-11 macro adapters. The original designer was kind…
@RedWish has made an awesome collection of mods to do a full-size Zeropanel mod on the V0.2 printers using clear Acrylic, where the panels can easily be removed. He specified the panels to be cut with a CNC laser, which of course not many…
A fully parametric tub with a screw on lid for use with cutting fluids, lubricants, etc. There's an opening for the brush to go into and to have a place to put it while working. I've included the Fusion 360 CAD file so you can change it…
A neat way to store all the bits for the Chinese 80mm 3 jaw chucks - especially when you use multiple chucks on your lathe each with their own accessories. The lid has multi part components for the text for those that have MMU printers.…
These are all currently available results.
