Counting matching models…
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 30% Category: Signs & Logos
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
Added a .step file for modifying the dust port to your own dust collection system.
Model and file for modification to adapt for your own tools. Feel free to remix and post your modification here.
The Karcher WD3 fitment base adaptor I used to make this Karcher version of my own design for the Bosch Planer Dust Attachment, is based on the Base WD3 attachment by @Impersonator_171748…
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
Clamp to fix drying rack wire which is broken in the factory weld. Works with wire diameter 2,5mm and drying rack tube diameter of 12,5mm. Made to fit M3 bolts for tightening to the drying rack.
A corner square for assembly of outside 90 corners using glue and nails or glue and screws, makes assembly quick + easy. Features: - Chamfers for sawdust to not skew alignment - Clamping holes - Screw holes for screwing to tablettop for…
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
Just a small and a more beefy version of an S Hook that can be used for many things.
A dust collection base ready for remixing to fit your own dust collection. Includes .step file for editing.
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
Just a container for holding kitchen utensils. I made it with a voronoi bottom to allow for drainage. Hang it on the wall or put it on the counter as you like. Checkout my other Voronoi items here:…
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
I designed this small cylinder shaped table lamp for lithophanes, but it can most definitely be used without. I uploaded the lamp shade without lithophane imprints on it so print that if you do not want to have an image on the shade, you…
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360. Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
A reducer from 56mm OD to 35mm ID dust ports. This one is tested with a Hikoki 216mm (8 ½") Mitre Saw.
This is a special Lit Benchy version of my original lithophane table lamp, The Lit Benchy that rocks! Attribution The image for the lithophane I got from the “Stranded Benchy || Benchy Holder” created by…
A vacuum attachment for the 125mm disc hand sander I remixed. It fits the Karcher WD3 vacuum.
I included a TPU foot which you will need to print 4 of in TPU or similar grippy material.
This is the standard Anycubic Kossel bed holder. It can hold just a heatbed, just glass or both at the same time. Fits 240mm and 220mm round heatbeds. AMOUNTS NEEDED: 3 left, 3 right ones ORIENTATION: As is, eliminates the need for…
A beautiful pendant lamp shade, a round version of my corner model. Print instructions 4 Fronts 8 Sides 4 Ribs (makes for 12 in total) 1 Shade Hanger Assembly Glue or screw components together. Thread a light fixture and wire through the…
A round style hand soap holder made with a voronoi bottom for drainage
3D printed pull-up handles for home training. Print all big parts twice, for the small bar-holders print 4. Drill out holdes in handles to receive the screws. The 2 bar-plate holes in each handle side can be tapped for M3 bolts, or the…
Just a simple shoe hook designed to be sticky taped to the wall to hang a single shoe. Print two for a pair of shoes.
I saw the youtube channel GRINwood make a dowel maker for a table saw, so I made a 3d printable version of it. You need two M8 bolts to hold the cutter and guide blocks in the jig, and to tap the holes for M8 in the side of the jig. You…
Tom is a cute little robot that lights up with joy when he finds a match
A simple to print jig for making dovetails on a router table. Included built in tracks for using tracksaw rail clamps to hold the material to the jig. Print instructions: I recommend to print the parts solid or with at least 12 perimeters…
With holes for charging wire management. Also the model is side stackable so you can print multiples of it and click them together if you have multiple devices.
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
A sticky taped wall hung wire holder with a locking pin. Designed for easy usage and extension of the wire within it without them falling out when dropped again, due to the wire insertion through the slot with the locking pin.
I added a bit more spring tension to the design, as the bed was not secured well enough in the original. Also added some fillets, and a finger hole for releasing the bed easily (print 2 normal ones and 1 with a finger hole). Print…
150mm wide x 7mm thick. Created using Adobe Illustrator and Fusion 360 Print Settings Printer: Anycubic Kossel Linear Plus Rafts: No **Supports:** No Resolution: 0.2mm **Infill:** 20% Category: Signs & Logos
This model is a gridfinity bin for shallow drawer of 50mm height that fits the Hongdui HD29 sharpening system + extended vice grips. I have designed and added STEP files for all the Hongdui parts with built in tolerances, so you can just…
A beautiful hexagonal lamp shade designet to emit a beautiful light through small openings in the shade. Designet to fit a socket fixture with a bulb in it. Print Material If you print the ribs with 50% linear infill and the shade panels…
These are all currently available results.
