Counting matching models…
Dry your desiccant in the 3D printed container(s) you use in the box . No need to empty and refill. No mess desiccant drying. I hated doing the empty and refill task for all my desiccant containers (10 boxes with 2 each), those stray…
I had trouble printing the upper (stacking) wings so I added some support in the model for a cleaner print from the first layer up.
Rework of paper holder to be able to stack them (as promised). Beveled bottom and top with triangles (added & removed) to prevent sliding left-right, front-back. I printed mine w/o top & bottom layers to save 1&½ hours of print time and…
The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into. I have remixed V3 into this V4 using the values supplied by Macco in his review of V3. I did a test print and they do slide in the…
Mashup of 2 or 3 versions of a bungee cord/rope hook I've been working on for a while now. I liked the alligator grips of some store bungee hooks but didn't like the retainer width and the hooks were weak. So I modified them to what works…
V4 mod with more narrow toe uploaded as a option for download. I did a test print and V4 works well with the newer boxes. Edit: The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into or…
***Remix file uploaded*** ***Version2*** Airflow diverter to force airflow upward to the spool. There is about a 15 mm gap under the rollers that doesn't do much for drying, so I made a diverter to force warmed air upwards to the spool…
E-track boxes on the market were to big and deep for what I needed. So I made 4 versions. 4 3/4 inches with and w/o slots and 9 3/4 inches with and w/o slots. I decided on 9 3/4 so 6 would fit on a 5 ft run (3 on a cut in half run). The 4…
Small bowling trophy set to present for our volunteer appreciation bowling night. Just a fun way to remember the night for our group. My wife painted the ball black and put red rings on the pin. Mashup of parts/ideas from models I've seen…
Toggle switch for LED lights inside an enclosed trailer, wired to the 12v system, and battery backup.
UPDATE Version 2 uploaded . Reworked the hook portion. I purchased a new enclosed trailer and needed to rework my set up. These will hold 4 ratchet straps (they are sold in sets of 4) by the hook or the loop of the ratchet. They are now…
35x4mm pegs . Neighbor needed some for a homemade board her father had made years ago (they were using round toothpicks) but didn't want the Blue/Green/Red. She opted for Black/Grey/White. She also asked for them to be a bit taller (old…
Mashup of parts/ideas from models I've seen over the years to get to a final version that works for me. Print model upside down for artwork.
I needed two 4 inch and one 6 inch corrugated drain pipe grates but the 4 inch ones at the box stores were a combo 3 & 4 inch unit with a hole opening of only 2 3/4 inches (not much use for water flow) and both need a outer ring in my…
A buddy needed a taller paper holder with a landscape side open (not end) for his desk to store quotes. I made this one from an old wood design I used 35 years ago. Front lip raises the paper up to be grasped easier than the flat…
Remix of the original diverter. Decreased height by 1 mm, increased width by 0. 8mm, and added a back "foot/tab" for placement stabilization as suggested by a user comment. I also made it hollow inside to save filament and time.
I needed a back of the box portal (not top feed) so I could monitor the hydro/temp display in the front for my setup. My steps for the mod: (Read all before starting) 1. I placed painters tape on the back just below the lip. 2. Marked a…
Grommet size hook with alligator grip for banners, tarps, signs, etc. I use these for our 4 foot banner in a 10x10 canopy during craft fairs. The other end is the bungee hook pair that hook to the upper framework of the canopy and I…
Power brick addon for more stability at the outlets. I had to much of a gap for my piece of mind when plugged in. This clips on the lower portion to help support the power brick while plugged in. A small cutout allows for extra length of…
Poker chip tray. Holds larger chips (designed for 42mm ceramic) but works great with 38mm also. Stackable to save shelf space. Personalized for our family Texas Hold-em holiday games. Fun graphics and sayings added for a smile and…
A quick fun print for all who enjoy a good smile. Center is hollow to save time and filament.
My spools would “climb/roll” up the wall of the dryer box when at the end of the spool when there wasn't enough filament weight to keep it centered. This happened with both the small OEM spool holder and by using the bottom rollers. This…
45 degree angle display Polydryer Snapdryer mod. No wire splice . No supports needed . Faceplate designed into top model . No M5 screw needed . Photos with step-by-step instructions start to finish . I really liked Kartans mod but had…
I needed two 4 inch and one 6 inch corrugated drain pipe grates but the 4 inch ones at the box stores were a combo 3 & 4 inch unit with a hole opening of only 2 3/4 inches (not much use for water flow) and both need a outer ring in my…
I need more height to closer match my filament sensor and gantry as it raised during the print. The 5% exchanger vent is to help humidity escape w/o great loss of heat (per original designer).
Used as part of the 3 part back of the box filament mods. See 3 part back port in my files.
For Hydro/Temp display (ambient) for comparison to dryer display. I got these from Amazon https://www.amazon.com/gp/product/B09TY3WHDR/ref=ox_sc_act_title_1?smid=AFMRW02PTHTEX&psc=1 . They fit both this holder and the supplied OEM…
I tired of bending down and reaching to the back of my mailbox to get our mail. This brings the mail forward to you. Designed to contain mail with side and back stops that allow airflow around/through as you pull it forward. The back is…
Trailer tongue latch cover to keep rain, snow, dust, dirt, etc from rusting/clogging your trailer tongue lock/latch. I live in the PNW need something to deter rust. The 3 holes are for magnets to help keep it in place. I added reflector…
5mm button set I designed for my 45 degree angle Polydryer Snapdryer display model. I wanted more height for the buttons from the faceplate and the white from the OEM (red & black rubber) buttons was fading due to use. I did a color swap…
3mm button set I designed for my 45 degree angle Polydryer Snapdryer display model but I wanted more height from the faceplate so I made a 5mm set also. The white from the OEM (red & black rubber) buttons was fading due to use. I did a…
I needed a bungee connect that I could use with a carabiner for a over head, hard to reach canopy bar. The hook design worked good until there was slack on the bungee. This eliminates the worry about having to replace a hook.
Mower bagger lid holder using a kick-down door holder to keep the bagger lid open during bin removal. My new 3 bin bagger does not have a "keep open spring" like my old 2 bagger did, and no way to adapt a spring for it. I designed a…
These are all currently available results.
