Counting matching models…
EDIT : added a remix of the remix of the remix - little tighter when holding the computer and a little smaller when packed. From the laptop stand by Vivamus3d. I wanted a model a little more sturdy and which would not break or fall appart…
This is a remix of a remix of a remix of... redesigned to fit the Pro S1 and stay a little better in place.
Here is another remix ! Other ones didn't fit on my E3v2 - this one has larger opening to fit better on the metal piece. It's made to fit smaller bearing (606ZZ I had in stock) indidebearing piece : the hole is a little tight - has to let…
Very simple holder for Elgato Stream Deck Mini. The base is 5mm, that allows any simple modifications. Printed in PETG to give a little flexibility - the Stream Deck clips itself easily inside (front first, then push back side.
For a specific installation - the robot will be playing a miniature toy piano - I was in the need of a moving finger. Here it is. It fixes itself on the arm of the fantastic EEZYbotARM mk2 - uses the same SG90 servo motor - I replaced the…
Print on the side, 8 screws, done.
This is an add to a model from ThingWizard on thingiverse.com. I added the base and fixation screw. It needs : a 3/8' (microphone stand size) ruthex insert for the base a M6 ruthex insert for the fixation, a M6 bolt with square base (see…
To keep the M4 protected in the bag ! 2x M4 (of course :-) ) bolts and nuts (1cm) keep the interface in place. That's not the most beautiful system so far, but it's fast - until I have time to think about a better system… Remixes welcome…
Inspired by the lightning bolt of Bowie's Ziggy Stardust, to realize small knobs for plexiglass doors. There is a space for a M3 nut, it can be a little tight but you can use a small file or tool to widen it. Use the back piece with 16mm…
Fast remix of the excellent Note Air Vent Holder Mount of Stillwave. This one is for EU cars (no UK left drivers !) EDIT : the upper part appears to be to thick to be fixed easily in the car. New version (updated) uploaded ! I added a…
The original model requires to pause the print and position some M3 nuts. This is a remix of the base with enough room for for M3 Ruthex inserts.
Made for Lux-Tool 150mm. https://www.obi.at/pruefwerkzeuge-messwerkzeuge/lux-schieblehre-comfort-150-mm/p/1153709 Because the case they sell with it is sh*t, bulky and fragile if you transport it. Here you just clip it on. It can be tight…
Elegoo Saturn Vat Holder remix mostly with a little more tolerance - to fit the 20x20 I had.
Spool holder with 606 bearing. As I had a few left. Basically the same system as many other designs. But with a little more character :) I added some M3 bolts for more solidity, and there will be two m3 rods (I dont have them for now, so…
Ikea Upphetta is a good and cheap coffee press, but the knob isn't very solid - made of thin plastic. Mine broke only after a few weeks. https://www.ikea.com/at/en/p/upphetta-coffee-tea-maker-glass-stainless-steel-60241389/ There are…
In order to make supports for a mobile (and light) multichannel system, I designed this simple adapter. To be fixed on a wooden plate of 20x20x1cm with 4 screws or bolts M3. Drill a 0,8cm hole in the middle (space for the foot screw,…
A very simple lamp design, inspired by the bulb itself. https://www.amazon.de/dp/B09YRLL28Q?psc=1&ref=ppx_yo2ov_dt_b_product_details or…
with Ruthex m4, to replace the ugly ikea door knob.
You will need : Unscrew the metal plate 3 longer screws (3,5x25 are enough) 6 magnets (10x10x4 mm) to insert + superglue
Led mask and splitters for Fun Generation LED Fogger 500 CO2 RGB. For a special project powered on Battery, I had to find a smoke machine under 600W. Only one model was available, sadly with leds, and surprise : impossible to operate the…
Two very simple tool holders, realized to fit inside a lack enclosure. The spatula holder needs 6 magnets (10x10x2) They fit inside without glue. The plier holder form is freely inspired by one of the Bowie's Blackstar designs. Category:…
Made for Hans Gröhe shower support, 22,5mm.
Filter holder and 100mm tube adapter for 190mm Levoit LV-H132 filterx
Dual output Hepa/carbon Filter for LACK printer enclosure [SOON pictures of the installed thingie !] This is the second design : this one should fit into the Lack table, the filterblock simply slide inside. It's designed to fit a 120mm…
I'm building a keyboard pedalboard, and designed some elements to fix a few pedals. It can be interesting for people for the two following : Yamaha FC-7 (pedal blocker for the back - the pedal can also be fixed in the front with a screw)…
This is an arduino box, designed to host 6 jack cables - as I needed to get the signals of switch pedals and get the info into puredata. I had some elegoo boards laying around - it fits perfectly - but it should fit an original UNO. I…
Adapts on a K&M omega stand, under the keyboard. and possible to add an insert and screw to secure it
These are all currently available results.
