Counting matching models…
Dimensions (H x W x D) Board: 55mm x 28mm AZDelivery ESP32-WROOM-32D Base (Nominal): 59mm x 32mm x 25.6mm Lid (Nominal): 63mm x 36mm x 6mm Base + Lid: 63mm x 36mm x 27.6mm Mount Tabs: M3, Head: 6.5mm, Thread: 3.4mm Internal space: Approx.…
If like me you had to take the front panel off to clean the fans and filters continuosly thanks to owning a cat, you probably broke one, or they've become worn down so the no longer fit snug. Print a few of these and it'll be solid again.
Strong, stackable drive storage with anti-slide backstops, print in the strongest material you have if you plan to stack them, I wouldn't stack more than 3 tall as they'd be quite easy to knock over unless secured. I have successfully…
Printing: Material: PLA/PETG Layers: 0.2mm Supports: Normal Support base pattern spacing: 4mm, makes them easier to remove and uses less material. Use a blocker on the central part, the roof doesn't need supports due to the ribs. Wall…
Printing: Material: PLA Layers: 0.2mm Supports: Normal Support base pattern spacing: 4mm, makes them easier to remove and uses less material. Wall loops: 3 Outer wall speed: Slow, if you want a nice smooth finish Infill direction: 45 (to…
Dimensions in mm: 57 wide, 55 long, 15 thick. Print standing on its side with the drive head access window at the top, If done right, the 45 degree slope is at the top side like in the 2nd photo. Scale to 1.57 (increase by 57%) to make it…
AA and AAA battery dispensor with backpocket to hold a charger/tools. Printing on the BL P1P took 2h 26m at normal speed using 0.2mm layers with 0.4mm nozzle. Consumes approx. 110g of material. I used a 15% sparse rectilinear pattern…
TL;DR: Print settings at the bottom Update 2023-09-01 I've made the required tweaks and re-printed, everything now fits like it should. However, I tried this model on 3 different machines and it fitted slightly different in each, it seems…
As the summary, I just added a screw hole. The hole is 6mm for the shaft and 11 mm counterbored for the head. The max screw head thickness is 4.8mm before it will interfere with the camera base when clipped together. I am still learning…
If you're like me and you get easily annoyed with devices getting moved around, then this the solution for you. Takes less than an hour to print, costs less than £1 in PLA and takes 5 minutes to mount. Requires 2x M3x10 countersunk head…
This hanger just slides over the end of the projectors stand and mounts on the wall, causing the projector base to sit flat, you still have the full range of motion offered by the projector for aiming. You can stick it, or screw mount it…
These are all currently available results.
