12 models
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
If you need to secure your precious belongings in a safe place, you found what you were looking for. This safe is secured by a 3 digit combination to prevent anyone from opening it (unless they have a hammer or a heat gun, I mean it's…
NEW VERSION 2 : link After releasing two print-in-place card wallets, I decided to take a different approach for my next design—this time, not print-in-place. I revisited the drawing board and developed a brand-new design with an…
Following the unexpectedly successful launch of the SlideWallet V1 and receiving a lot of feedback, I set out to create Version 2. This new version addresses as many issues as possible while incorporating a highly requested feature: a…
This is my entry for the “mechanial marvel” contest, I designed this model specifically for the contest. The mechanism is 100% 3d printed , no need for bolts and nuts, and all the pieces snap on together , so no need for glue either. This…
⚠ This model requires a very accurate printer and good bed adhesion I made this fun print in place model to hook things. I added a sping back action to feel like a real carabiner. After printing, I recommend unlocking the screw first, and…
Attention : This print requires a very accurate printer, the tolerances are small ! You could scale it up, be then the springs should also be scaled up Instructions Required : Printed pieces : 1 x Cylinder 1 x Core → only piece that needs…
Introducing SnapCase, a print-in-place box model with a securely locking lid. The triangular design results from the print-in-place feature, allowing the model to be printed on its side. This shape minimizes the overhang at the top,…
This is a mini christmas tree that uses the bridging capabilities of PLA to make branches. Every tree is unique as you have to cut it and shape it yourself ! Instructions : Print settings : These are the settings I used for my print, it…
This phone stand has 2 moving arms with pads that adusts to the size of the phone. The parts are quite small and have to be printed in the right orientation (see the picture) in order to have a good fit. The parts are glued together with…
Instructions to build the pencil holder print the parts upright, no support needed I recommend 0.2 mm layer height for smooth movement, 0.3 mm works as well but it will probably require a bit of use to be smooth. Insert the cup into the…
I recommend printing in 0.15mm or less layer height to have maximum details of the numbers on the dial. It prints fast and looks cool
These are all currently available results.
