Counting matching models…
Update 250711: Made picatinny attachment area 0,1mm wider per side. 160mm length 50mm rising height attached with 2x M3x30mm cylindrical screws and nuts let me know if there are any issues.
Front part with 4 Nerf compatible tactical rails Front part with 2 Nerf compatible tactical rails Back part with Nerf compatible tactical rail Pull for better priming set of ion sights rail to rail adapter to use the blaster as a foregrip…
quick design for an extended Battery door for the X-Shot Ragefire. let me know if you have any suggestions for improvement.
This is a printable case for an Arduino Uno based ballistic chronograph / fps reader meant for Dartblasters like Nerf. Its based on the really great arduino code from paperskeletons3d. He is the great mastermind behind this DIY Chrono! I…
Just a simple remix from the great Carry Handle that @blasterface_841953 made. I removed the integrated sights and changed the screws into M3x10mm and M3x6mm Heat Inserts.
Nerf Elite 2.0 Prospect Mod Parts Nerf Top Rail Picatinny Top Rail Front Scope adapter for Nerf Rails
Just some little Mod Parts for the Nerf Elite 2.0 Tetrad. Pumpgrip replacement (needs 2 two M3 InnerHex screws and nuts (about ~20mm length) Spring Spacer
Just a replacment for the Nerf Sharpfire Barrel Attachment. It has Picatinny rails on top and bottom. Also added a file for a spring spacer. Vertical print orientation with support on the inner surface.
included files: - Halfdart Dart Holder for 6 Halfdarts - Cylinder/Drum replacement for HalfDart Usage (different chamber diameters to try)
Just Slim Case for Xiaomi Redmi Note 9 with the ability to put in a bank card. I would suggest to use supports for the upper walls
Inline Clip Barrel Adapter for common front loading Dart Blaster. Available for 2 and 3 HalfDarts. Just put on fitting O-Rings or Iso-Tape and have fun :-)
Finally got my hands on a Spectrum and remixed the front from OPCOLU. You will need 4x M3 heat inserts and M3x10mm screws for assembly. Additionaly i made a hybrid pusher that works with full-length mags and also with half-dart mags in…
Flywheel Cages for the Nerf Barricade to be able to fire Elite Darts with stock motors. Available in different crush variants. Cut Outs on the Back Shell of the flywheel Cage need to be made larger. I also added a replacement Muzzle.
Designed some Mod Parts for the Carnovire: Spring Spacer 6mm (insert on the Plunger side) Back Cap with Stock (assembly with 4xM3 Screws and Nuts and some glue) Picatinny rail adapter Barrel/Muzzle (2 Variants: Stock Internals and Pusher…
This Thing is meant for usage with a Cutter Knife to cut Nerf Mega Darts into HalfMega Darts.
For the assembly you will need two M3 screws/nuts and a rubber cord. I would recommend printing with a high infill. I also added two more front inserts.
BuzzBee Pirate Blaster Spring Spacer and Front Ring
Just some redesigned Dart Shells and a Heat Shield for the shown Off Brand Double Barrel Blaster.
Made simple boxes for carrying the Pokemon MY FIRST BATTLE TCG. Has Cut_Outs for everything you need, except the game instructions.
just some shells I designed that are compatible with the Nerf Rebel Ops Doomcannon. Standard Front Loading Shell (no Dart Post) Rear Loading Shell (mainly for HalfDarts) experimental Halfdart Front Loading Shell - not tested yet…
Barrel Replacement for the Snake Barrel of a Nerf Roblox Viper Strike- Two Parts that need to be assembled with 2xM3 Heat Inserts and 2xM3x10mm Screws. No Supports Picatinny rail on the bottom.
just a little Chrismas Giveaway :-) needs a Keyring and M3x30mm Screw and nut
Barrel Insert is usable with 2 O-Rings (14mmOD 10mmID) or just with some ISO Tape. AR is recommended to be removed. Dart Holders are meant to glue on.
For the assembly you will need a few M3 screws and a rubber cord.
Just a simple Ring with the Logos of Starcraft. 20mm inner diameter. needs quite good print resolution and slow printing.
some mod parts for the X-Shot Claw Hunter - Inline Clip Barrel (versions: 2x4 and 2x3 Half Darts) - Front Insert for Inline Clip Barrel - Front Insert for inline Clip Barrel and Crossbow Aethetics - Crossbow Middle Part (attached with two…
Includes a Short Dart and an Inline Clip Cylinder. Uses the original Axis Parts and a M3x 45-50 Screw and a self securing nut.
I had the idea of making a rugged style box with integrated display for my retro gaming project and thats the result :-) Hardware needed: 1x Raspberry Pi Zero 2W 1x 7 inch Display (i bought the cheapest i could find online. Unfortunately,…
Since I was recently asked if i could upload the parts, here we go :-) Replacement Parts: Cylinder (IC and HalfD) Muzzle Bottom Shell part (now with picatinny) Lever
made some replacement parts for my 20 year old Saitek Cyborg. Armrest right- and lefthanded thrust controll and wheel
Mega Dart Holder needs to be glued in the Rival Ball holders on the side of the blaster. Top and Bottom Holders are different. The Files are meant as an addition to a Rival Flex Mega Dart Conversion. For example:…
Just a simple rear loadable shell :-)
Hardware needed: 6x M3x20mm Screws and Nuts Please get in touch if you think the files need any adjustments.
Print Orientation upside down. No Supports needed.
Print Orientation upside down. No Supports needed.
A Box Inlay System for the Game KARAK (KOSMOS Edition) Room for the storage of the main game and both expansion sets and compatible to this tile holders:…
Pump Action Kit: Print all STLs in there given position. Most Parts don't need support. I recommend to print the Files with at least 4 walls and 30% infill. You will need some M3 Screws for assembly: 8x M3x30mm + Nuts 2x M3x8mm + M3x6mm…
3 different Front Replacments 2 different Pump Grip Replacments a Pair of Iron Sights a Cheek Rest a Magwell for Reverse Angled/Slanted Talon Mags Print all STLs in there given position. Most Parts don't need support. Please Check…
Let me know if you need other variants. UPDATE 250722: added a replacment Pull Rod Included Files: Body Left Side Body Right Side (Versions for Heat Inserts or Plastic Screws) Trigger Trigger Pin Catch Release Halfdart Barrel Halfdart…
Let me know if you need other variants. UPDATE 250722: added a replacment Pull Rod Included Files: Body Left Side Body Right Side (Versions for Heat Inserts or Plastic Screws) Trigger Trigger Pin Catch Release Halfdart Barrel Halfdart…
Let me know if you need other variants. UPDATE 250722: added a replacment Pull Rod Included Files: Body Left Side Body Right Side (Versions for Heat Inserts or Plastic Screws) Trigger Trigger Pin Catch Release HalfDart 3x Inline Clip…
It uses standard slanted/angled Worker Talon Mags. (Not included) Avaiable in 2 Versions: 1) "V3" uses mainly M3 Heat Inserts and M3x8mm Screws for assembly. 2) "V3_PlSc" uses mainly 3x10mm Countersunk self tapping or comparable Screws…
These are all currently available results.
