Counting matching models…
PETG plastic is better for printing the handle, as it will need to be unbent to slip the half rings through - I don't think you can do that with ABS, but I haven't tried it. Ver 1.3 update: - new handle size - now there are three of them:…
Fan model: Delta BFB1012SHA01 Screws: M2x6 11 pcs. M3x16 3 pcs. I also added a model in STEP format.
Slightly increased clearances for bearings - they can now be inserted without manually modifying the model itself. Reduced the number of brass insert nuts to one. Removed the lettering as it could interfere with the screw.
For Marlin FW: #define NOZZLE_TO_PROBE_OFFSET { 30, 0, 0 } Print Settings Printer: TwoTrees Bluer v2 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: DEXP PETG Black Category: 3D Printer Parts
Slice with 0.5 line width. This cooling is compatible with Titan or BMG extruder, with stock hotend or e3dv6 ... E3Dv6 with Bi Metal Heatbreak with "nut" is 1.5mm longer - use this model instead of the "standard" E3Dv6 The image above…
Slice with 0.5 line width. Print witch supports or with bridges - doesn't matter Print the nozzle with the nose up - the STL is incorrectly directed (manually orient correctly). BLtouch in Marlin: NOZZLE_TO_PROBE_OFFSET { 44, 14, 0 } .…
Adapter for stock Holder
Perfect for printing with PETG. Print the first part with 100% infill.
Easy print. Easy mount. STEP file inside. Enjoy! Print Settings Printer: Flyingbear Ghost 5 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: DEXP, FDPlast PETG Category: 3D Printer Accessories
Easy print. Easy mount. STEP file inside. Enjoy! Uses Sailfin Extruder: https://github.com/CroXY3D/Sailfin-Extruder This modification uses stock fans and heater with thermistor, except hotend fan - you'll need a 40mm 24v fan Weld-in brass…
This is practically a copy of the original effector from Aniсubiс Kossel Linear Plus, so it is enough to replace the effector with the printed one and only the height (Delta height) will need to be changed. The width between the "rods"…
Easy print. Easy mount. STEP file inside. Enjoy! Uses Sailfin Extruder: https://github.com/CroXY3D/Sailfin-Extruder This modification uses stock fans and heater with thermistor. Four weld-in brass nuts are also required - two to mount the…
You need two M3x12 screws and four M5x12 screws (or bit longer). Bearing uses from stock holders. I designed the mount for printing with PETG plastic. The gap between the two parts is very small - only 0.15mm Reduce the Body2 in the…
Adapter for stock Holder
These are all currently available results.
