30 models
This is a bit bigger than the original (see picture 2). I replaced the 3 small drawers with 2 additional big ones. They also got a 3*5 gridfinityframe inside - it will fit gridfinity bins up to 6u, for example. Used the flat covers by…
Turn your empty Extrudr M sized spools into storage space with these drawers. Spool sizing: S 0,75 kg 0,80 kg M 1,00 kg 1,10 kg L 2,30 kg 2,50 kg XL 5 kg XXL 10 kg There's full height drawers, stackable half height and stackable third…
A simple drill guide to drill holes in the correct location. It's easily removeable since i removed the nubbins that lock it into the honeycomb wall. Depending on tolerances, you may need to drill out the hole with your 6mm masonary bit…
I made this remix to fit two inserts in the top and my powerbank in the bottom piece. You can either fit two inserts next to each other in the top part or use the dual width one i made. The one i made allows for a sligthly longer cable…
A box for your Nikon Z needs. Neatly stores 4 Nikon EN-EL 15C batteries, 4 XQD/ CF-Express B and 4 SD cards. If you want it to seal, use a piece of 1,75mm TPU filament, cut it to length and join the ends with ca glue, for example, to…
Reuploading and combining the original model with a remix of the top to add vents at the back. This uses the original docks electronics (except the status LED) with the PCB rotated 90° to put the power and HDMI in the back for a cleaner…
This is a remix that makes this plate holder usable for the X1 and P1 series printers build plates. I also remved the m3 nuts and put m3 (Voron type - m3 x 5mm x 4mm) heat set inserts in their place. It's a single 3mf, that contains all…
Babe, wake up, they released the 1x2 version. Same as the 1x1 , except it's 1x2. Still holds 10 trays
Edited the single honeycomb to allow for a M3 Heatset Insert
Replacement Spool for broken or lost Dymo LW 450 label spools. Prints in 3 Parts. Attach the disc with the hexagonal cutout to the spool - glue may be required - add the labels, then screw on the other disc onto the spool. Available as…
A long tapeholder to hold multiple taperolls 72,5 mm diameter and up. Needs 2x Empty inserts. Print as shown in the picture. I used tree supports and a 20 mm brim, just to be safe and it worked perfectly.
Fixes pegs in the back to fit wall correctly. Needs a small pillar of support in the back for the top center peg. Support in front for the next that's generated when selecting auto support is not needed
This is a coin holder for your cars cupholder. I made it specifically for my A3 8V but it can fit others too, just check dimensions before hand. It's 75mm in diameter and 70mm in height. Holds 2€, 1€, 50ct, 20ct and 10ct (and 5ct) coins.…
1x1 Gridfinity bin that holds 10 epoxy trays with a break-away stirrer
This shelf lets you store up to 10 Dymo D1 labels neatly on your Honeycomb Storage Wall. It's designed to attach to the wall using M3 screws and a threaded insert. You can use these inserts to heatset threads in to screw into.…
Useful little box to carry 5 king size cones on you. Box outer dimensions are ~ 116 x 78 x 16 mm. It has a logo in the top that can be painted in slicer using the fill tool. If you don't paint the logo, it won't show up in the print at…
Added a shallow extrude of the logo to the lid so that you can select it in - for example - bambu studio for multicolor printing. Print it face down, unlike the included screenshot - that's just for better visualization. Haven't printed…
Useful little box to carry 3 king size cones on you. Box outer dimensions are ~ 116 x 55x 16 mm. It has a logo in the top that can be painted in slicer using the fill tool. If you don't paint the logo, it won't show up in the print at…
Gridfinity L Label Bins - wanted them, couldn't find them, made them. Filling L shaped holes while using all the space. Single file contains 2u, 4u, 6u and 8u sized bins.
1 Version adds 8 8mm holes for magnets in the bottom, the other one adds 10. Both available as stl and 3mf
Edits: Increased font size on numbers for better printing Added logo to the lid Numbers and logo are now flat for multicolor printing Hinges now use M2 screws instead of pieces of filament Closing with 5x2mm magnets Includes a 3mf with…
Added the logos boarders as a 0.01mm wide extrusion into the lid. This allows you to select the parts of the logo in Bambu Studio as separate surfaces for easy multi color printing. The extrusion only has a width as 0.01mm to make the…
This allows you to mount your guitar to the wall. It prints in two parts without any support. The piece on the left (3rd Picture) gets screwed to the wall - the download includes a template to drill the holes. I use 5mm x 60 mm…
Some of you already downloaded and printed the Drawers i made for the Extrudr M Spools . And here are the parts to turn them into a tower. I simply used a 28 mm diameter wooden broomstick - i made 3 sizes for now, 25 mm, 1 inch and 28 mm.…
A remix of the parametric tool box by Yanev. Fits a Voltcraft MT-52 or similiar multimeter including accessories - divided by a small wall in the bottom piece. Logo is added as shallow extrusion. This lets you select it in Bambu Studio…
Just a simple remix for dualcolor. Extruded the logo to match the bottom and did a shallow extrude of the logos outline into the model. This allows you to select the logo as a face using the bucket coloring tool in bambu studio,…
Tool handle for square 2,5 mm x 2,5 mm. Uses m3 heat set insert and an m3 x 8mm grub screw
A handle for your Bosch (and maybe other) sandingpad. I made it for the 125mm pad of an Bosch PEX 220 A using m4 heat set inserts. It may fit other sanding pads as long as their holes are 29mm apart center to center
Science can't explain how magnets work yet, but that doesn't stop us from using them anyway. 28 of them, to be precise - ⌀ 4mm x 2mm. Simply a print in place box to fit the LTT Precision Multi-Bit Screwdriver and additonally 18 4mm bits…
This is a simple swivel box for the Ruthex drills they offer sized to match their heatset inserts. Print in the orientation provided, available as stl and 3mf. The holder will lock into place in it's closed position and is limited to…
These are all currently available results.
