Counting matching models…
This was a project I created when rebuilding a Squire Strat/Starcaster mashup. You can judge that's fine; I used what parts I had to learn finishing, wiring and setup…free is the best when learning. :) I've included hole templates so you…
I use the shelves to hold minis to paint. When there were multiple on the shelves they'd catch on weapons and such bringing more than one mini with. I made the shelf deeper and added a lip to prevent hitchhikers. Print settings: Material…
How this project started: After researching VOCs I'm still more comfortable exhausting them out of the house when dealing with things like ABS. I do have a really good air filter with a carbon filter, plus HEPA/carbon scrubbers inside the…
Two of these will fix on the bottom of a 20 Quart Sterilite Gasket storage container. Used to keep the filament above the desiccant beads and prevents them away from the spools. I had this on Thingiverse, but can no longer edit anything…
I'm continuing to modify my NextGen enclosure, so it works for the space and setup I have. The TPU helps with the seal and vibrations for the fan. If you don't have TPU, you can try skipping those parts, but I recommend adding them. R2…
I created this to replace the acrylic side panels that come with the NextGen enclosure. There is a built-in removable support on the vent. No additional supports needed. The vent door slides on and off depending on what you need. I…
NOTE: I only have it designed for the two sides, I'm working on the other two and will provide that bracket when available (the part that attaches to the RMU itself. The shelf attachment used will be the same between the two options. I'm…
The small 45 adapters that normally come with a record player have always been the bane of my existence. I created this adapter as an easy on, easy off. It's easy to grab the adapter and position it. It's easy to grab and remove. It is…
4 posts using clear PETG (or other clear material). .15mm layer height with brim. I printed on the textured sheet, no post processing other than removing the brim and some minor stringing. Hot glue to hold in place. I love the snug case,…
How this project started: After researching VOCs I'm still more comfortable exhausting them out of the house when dealing with things like ABS. I do have a really good air filter with a carbon filter, plus HEPA/carbon scrubbers inside the…
I added a tab to the back of the Raspberry Pi and 5 Inch Display Case by Neddy. It was the easiest way to mount to the table I have my printer enclosure on. PETG 0.2mm or 0.3mm layer height. I was unsure how the overhangs would be handled…
The design was inspired by the coffee shops I visit who have business cards and pens/pencils. They're always separate with the writing implements in a coffee cup. I though combining the two was a logical move. I've added a tilt and recess…
This is a quick print for a rod to use for the towel holder. If the pegs for the holder fit your pegboard, this should work for either paper towel of the blue shop towels. Print Quantities: Towel Holder Rod Quarter: 4 Towel Holder Rod…
I created this to replace the clear acrylic piece that came with the NextGen enclosure. It had much bigger holes and nothing to secure the PTFE tubing to for the MMU. I designed this to pass a PTFE tube through to the MMU inside the…
Description Optional potion token design for the One Deck Dungeon game. The design was inspired by the artwork on the Boss Fight card. I wanted to make something fun to replace the white tokens used in the game. Enjoy and good luck fellow…
The clear plastic holder that came with the slipcase version of The One Ring RPG by Cubicle 7 has seen better days. I created this to replace it. The design used is from the gates of Moria. It's sturdier than the clear plastic and…
This cable guard uses the screws and nuts provided with the Next Gen Prusa Mk3 enclosure (sold by Matterhackers and Printedsolid). Held in place by the four screws and nuts that come with the enclosure. Additional protection for the…
I loved the design of this pedal board, super easy to print: https://www.thingiverse.com/thing:4370638 I have wooden floors, so I designed TPU feet to stop it from slipping or scuffing the floor up. .20 Quality in PrusaSlicer No supports…
Easy to print. Easy names, Holder_Bottom, Holder_Top, Holder_Divider. Easy assembly. The base is thicker to prevent pen and pencil chaos from accidental bumps with a honeycomb pattern to avoid implements slipping out of site if you choose…
Use the following print settings to print hollow. This will allow you to add any lighting style you wish. The one pictured is printed with a transparent PLA, a transparent PETG would work well for this in other colors. Printing…
Remix designed to reuse the axle from the Universal Auto Rewind spool holder by vincentgroenhuis (I didn't want to reprint a different axle or spring). https://www.prusaprinters.org/prints/168-universal-auto-rewind-spool-holder-mm Based…
The Foiresoft Zebra Roller blinds fit well against our old windows. When we replaced the windows this year the bracket keeps the blinds too far away from the window. It was letting a light in around them. I created this adapter called…
This requires modification to the enclosure top. You'll cut the enclosed tabs open on each side of the hole on the enclosure top. A small hand saw works fine or another cutting tool. Sand the sharp edges down if there are any. Print 8 of…
I wanted a sleeker look to the logo, so I created a flush version that fits nicely into the existing box top. Material: Whichever you use to print the box top to avoid issues glueing them together. Layer Height: Match the layer height…
These are all currently available results.
