Counting matching models…
UPDATE: Added the 2.1 version (untested) Designed with air flow in mind this light weight case. M2.5mm stands that came with the Big Tree Tech TFT50 is used in this. If it is missing they are 17mm long. There are 2 M3 size on each side of…
Water tightness: Due to the viscosity of alcohol I cannot guarantee water tightness. Depending on the print quality the seal is spill resistant not water tight . Do not transport this while it contains any fluids. Place the fluid in a…
These filing sticks can mount sand paper 37mm x 25mm (Now with a jig). It uses a snap on clip to fixture the sand paper onto the block. You can engrave your own text onto the pen handle using Prusa Slicer text tool. Requirements: 3x 2M…
A remake of a spool weight adapter I found here but undersized to fit slightly more tighter spools. sized at 52mm ID with labels engraved to the sides to indicate sizing Fits 500gram weights https://www.amazon.ca/gp/product/B0C3LYT4K5
I wanted the original cover with my ST-Link V3 enclosure. This allows you to just use all your existing back plates and keep your cool serial numbers. I included my STEP files of the reverse engineered enclosure. you can also get them at…
Mounting arm have stepped rotation, 40 points of rotation, can hold the weight of itself using Bedsprings There are different bed spring strengths. choose the ones that won't break the print when twist and moved. Update: Added a V slot…
Very Simple Cable clips. Can be resized to be longer or narrower.
Multiple configurations including Combed and no Combing.
This is a useful general purpose PID controller. I primarily use it for my filament joiner but can be used to PID control a soldering iron for Heat Set insert tools. Mounting points for PT1000 thermocouple and power socket so you can plug…
This is a Leatherman Raptor Holster adapter for the Tek Lok Belt system. Supports rotation mounting!
This is designed to support WDT tools of all types while still being able to let the porta filter rest on the table flat. I posted the model of this portafilter here if you want to make your own stands.…
A simple 1.2mm thick sleeve for Hard drives. Use it to store the drive and protect the PCB from contact. Seal the opening with adhesive tape if you don't want the drive to spill out for long term storage. Printed with Kinluot PETG clear…
(Updated) Do not use this with anything that has alcohol. it will soften the Resin over time. Modeled after the real metal grease guns from Taiwan. This is dimensionally accurate to the real thing only difference is the threads do not fit…
UPDATE: Made a mistake with the assembly drawing. Updated now A camera module for the Modular Clicker Arms This is a simple mount that uses the modular parts of the clicker arms. For parts description visit the original components page…
BOM: M4 Socket head 20mm x 3 M4 Heat Inserts M5 Counter Sink 12 mm x 8 M5 Counter Sink 16 mm x 8 M5 Heat Inserts 10mm or 6mm x 8 M5 Bolt H:4.70mm x 8 Ball plunger 8x9mm x 1 (Ball Plunger Set) This design is for casements with these…
This general purpose foot pedal was designed for my Spray Bottle project (Now Availlable) . https://www.printables.com/model/960427-hydraulic-spray-bottle-actuator Required BOM: Vinyl Tubing 1/8"ID X 3/16"OD…
For Foot Pedal Assembly go to https://www.printables.com/model/905807-hydraulic-foot-pedal If evaporation becomes a real problem use hydraulic fluid or mineral oil Required BOM: Vinyl Tubing 1/8"ID X 3/16"OD…
This is a funnel to keep the grinds from falling off the edges of the porta filter. made to snap fit for the Breville/Sage Dual Boiler porta filter (58mm). it fits most of the baskets including the precision VST baskets
This is for the included USB cable. May not fit 3rd party USB cables BOM (4) 5mm x 5mm Cylindrical Neodymium magnets
Note: 54mm is untested I only have a 58mm machine. This depth gauge tool works by putting it in a portafilter and mounting it into the Espresso machine like a normal porta filter basket. Tighten to just about the same resistance as you…
A simple TPU printed Exhaust port cover for Filament dehydrators with 4mm exhaust holes Use 3M VBM double sided adhesive tape to fixture it to the lid.
Keep your maker space tidy with this Tip and Cable Organizer. This was bought for https://www.amazon.ca/dp/B0BBSGG2S2 But this will work on any heat set press machine using 2020/2040 v-slot extruded frames. I use a paper clip for hinges…
BOM Requirement M3x10mm Screws (for Body) M3x35mm Screws (for 120mm Fans) M3 Nuts Noctua 120mm fans (4 pin) https://www.amazon.ca/dp/B07CG2PGY6 PC Fan Power and Controller (3 Fans) https://www.amazon.ca/gp/product/B0BY4W377P 4"…
Filament Sharpening Adapter for a 2.0mm Staedtler mechanical pencil Although you could just use the sharpener at the cap of the pencil, this doesn't result in a sharper point and is harder to turn around than using the Staedtler 502 BK…
This was an experiment for Klipper's Z Offset Calibration plugin, Turns out it won't work because I'm using a Beacon bed scanner. So I wrote my own plugin called Home_Nozzle https://github.com/Shinobubu/Home_Nozzle 2 Mounting versions for…
This Mounts to the 4 screw holes on the TDI/Hinder holster for the Tek-Lok belt system. No more messing with steel spring belt clips.
Requires M3 Screws 8mm , 16mm M3 Washers Extension springs (Ø6mm x 10mm ) Small nail or needle for filter hinge. Foam cubes 20x17x19mm M2 Heat Set Insert for Air Filter https://www.amazon.ca/gp/product/B093327KXJ M3 Heat Set Insert for…
A Garbage Tamper attachment for the Muji telescopic handle.
Flow Meter mount Compatible with 1" spaced Wall Control peg board Fits a Water cooling flow meter https://www.amazon.ca/gp/product/B0B1ZTJ4GB Requires a 4mm drill to drill out the supports.
This is a desk stand for a small desk mixer, It's designed to fit the foot stubs and screw holes of the Beringer Xenyx 302USB with an adjustable tilt This uses 0.75mm gauge paper clip for pins.
This tool was made with the Shower Head Depth Gauge Basket to allow you to adjust your grind to the headspace of your portafilter and espresso machine. Based on the Breville Razor this is the Adjustable version. This comes with an…
This is an attachment for the MUI Telescopic handle for performing Rotator Cuff stretches.
A Longitudinal mounted Spool holder with filament routing. For those really tight enclosed printers where mounting the filament spool in the traditional manner would take up way too much space. Low resistance smoothest rotation. The…
The Blue microphone is pretty heavy and the arm can barely hold it in place with out tightening. This wrenches will make it easier to tighten. It comes with 2 sizes for the small and large knobs.
Cork needs to be printed with TPE not TPU , TPE is UV resistant and Ozone resistant while TPU is not. Materials: TPE - 85A - 1.75mm 3D Printer Filament 80ml Glass Test Tubes, 25×200mm Round Bottom Test Tubes USB 2.0 Female Pigtail Cable…
The Dark Skys DS1 Chrome Planetarium does not come with a dust cover. So I designed 2 versions one that conformally hugs the projector lens and another that avoids touching the lens at all and comes with a harder outer shell to prevent…
This design is a bit hard and requires some dexterity. This Page is still under construction This has power synchronization, it detects power activity from the curing station to turn on the UV probes on the platform. To calibrate it…
A simple feet mount for the IKEA Tillslag trestle and a Filter Box Fan From Lasko 4x 30xM4 4x M4 Washers
For USB cables that are 3 mm thick. Prevent your clean white Mouse USB cable or Nylon braided cords from rubbing on the desk dirty surface. also reduces drag by reducing the contact points from the length of the wire to a few contact…
These are all currently available results.
