Counting matching models…
Parts can be printed without support. It will need 12 screws 3.5x30 wood screws. I used SPAX. The ship itself is only placed on top of the wall mount and is not fixed to it. It is tilted by 10°. I used the following print settings:…
Designed this part because my straightened paper clip was too wobbly / loose. Now I can connect the servo and the servo saver with cotters / "splints". I use a 2 mm drill to drill the hole in the correct size. Cotters has a diameter of…
Created the mount for the TrackStar 80A waterproof ESC 1/10 scale. Fits perfect and you can use the standard screw holes of the chassis. Sets with this ESC:…
I designed this based on the "Mini Track Loader RC" from Zedpi. You can use the lego chain and all the other parts from Zedpi's design ( https://www.thingiverse.com/thing:1000713 ). So it is only slightly larger as the original one from…
LoadedScissors asked me if I have a stl file for it. So I measured mine and created this one... It's without the coffee powder cup but for adjust the right grind grade it should work fine if you have lost your tool. 2018-03-14 Update:…
Desgined it because all other parts I found didn't fit good enough or are too low and crash into the paper clip that holds the print bed. Update 2016-10-02: I had an issue with my printer, caused by the cooling fan which blows the air…
As the the mounting points of the rear sway bar are not good enough (IMHO) I designed a holder which seem to function perfect and is easy to install and print. I used M3x16 screws to mount the holder and the shock tower to the body. For…
Tractor which can be printed in PLA, TPU (for the tires) and needs four 608 bearings and some metric nuts and screws (M3x25 for the body and M3x5 oder M3x6 for the wheels). My 15 months old daughter loves it and it is robust. UPDATE…
I designed another fan duct before, but this didn't work as good, so I did this and this is awesome. Designed for 40 mm fan (files without diameter in name) and 50 mm fan. Update 2017-07-22: New version (v4) for better cooling results. At…
Width/Length: 50mm Thickness: 24mm Angles: 90° and 45° Print Settings Printer: GEEETech Prusa I3 Pro B Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% honey comb Category: Household
Designed this to make the printer look more clean. Print Settings Printer: GEEETech Prusa I3 Pro B Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 20% honey comb Category: 3D Printer Accessories
Holder for Tupperware 1 liter bottle to let them dry. Print Settings Printer: Cetus3D Rafts: Doesn't Matter Supports: No Resolution: 0.3 mm Infill: 20 % Category: Kitchen & Dining
Philips Avent Cups Holder / Organizer Created this to solve the issue that the cups and lids always fall over. It is kind of modular. It is designed for small cups and the larger cups. The lid holder can be extended. I recommend to clue…
Holder for the FlySky FS-GT3C Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20 % Category: R/C Vehicles
Diameter for the umbrella is 26mm Diameter for the railing is 28mm Plug diameters: Inner diameter 24mm Outer diameter 33mm You can modify it if necessary :) Category: Outdoor & Garden
This is a handle for a gorenje fridge. http://www.buyspares.de/gorenje/kuhlschrank-gefrierkombi/turgriff/product.pl?pid=3545203&shop=gorenje&path=498889&refine=griff My design looks different, but it works. I used M4x25 screws and a 3.2mm…
Case for raspberry pi 2 touchscreen Instructions I added a pdf file as instruction. If you have any questions please leave a comment! Category: Electronics
Holder for the ABSIMA CR3P Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 Infill: 20 % Category: R/C Vehicles
Designed based on the original Panthers Logo. Perhaps you have to scale it up a little bit, but its up to you, your printer, your slicer settings and so on... Just glue the seperate parts together. Print Settings Printer: Geeetech Prusa…
Tried to improved the original design of the front spoiler from barspin's OpenRC F1. The spoiler is a little bit stronger at the point where it often breaks when you hit something with the spoiler. Additional I tried to change the mount…
Here's my holder for my Sony Xperia Z1 Compact which fits into a empty slot of my SEAT Ibiza ST 6J. You can customize the holder for your phone. Category: Automotive
A simple stand for the D-Link USB Hub DUB-H7. The ports are easier to access it takes less space on a desk. Print Settings Printer: Cetus3D Rafts: No Supports: No Resolution: 0.2 mm Infill: 100 % Category: Computer
Modified the side B part that it should fit the wider buttom plate of the 2017 version of the OpenRC F1 car (Daniel Norée / barspin). This part was original designed by 3D-Print_Tech-Design, I just modified it. All other needed parts are…
Here are some parts which where created or modified. Body mount Holder for wheels or a wing (holes are not perfectly aligned but you can use a drill to get it working) Wing Motor mount (modified to get the right distance between spur and…
This thing was designed to minimize the distance between cup and coffee outlet of the machine. Update: v2 was optimized for printing without support an turned around 180° Category: Kitchen & Dining
Holder for the Xcite 3i FHSS Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Geeetech Prusa I3 Pro B Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 17 % Category:…
Just a try to fix the cables, so they will not bend to much and break after a while. Installation is a little bit hard. You should disconnect the extruder cable to get it over the motor. Perhaps I will do a redesign. Print Settings…
Created this holder for the Bumper/Skidplate from Steamerzone: http://www.thingiverse.com/thing:377994 Just print it and the two washers and you can mount it on your skidplate/bumper. Light bar from hobbyking.com:…
Holder for the HobbyKing HK-GT2B Transmitter. You can screw it at a side wall or at the top wall to let your control hang down. Print Settings Printer: Cetus3D Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20 % Category: R/C Vehicles
Modified the original part for an air flow which is directed downwards/vertical and not horizontal/diagonal. Print Settings Printer: Cetus3D Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100 % Category: 3D Printer Parts
Here's my Eachine Pro58 Receiver Case for the Eachine EV100. I was inspired to do this because of the mod video of "Drone Mesh", thanks man for the nice mod vid, how to solder in the receiver. Worked great for me.…
This part should prevent the motor to bend which means the belt could slip from the pulley. On the picture there is no screw, because I have to look for a long one (M3x12 mm). Hope you can imagine what I intent with this part. If you have…
This is a shaft for the big spool holder of Mark Wheadon http://www.thingiverse.com/thing:761893 Created this for the filament spools which are available at material4print.de. Outer diameter: 51mm Length for filament: 82mm ForAiur asked…
This is a shaft for the big spool holder of Mark Wheadon http://www.thingiverse.com/thing:761893 I designed it to use it with FormFutura filament spools. Update 2016-01-04: I mentioned that it also fits to ColorFabb's filament! The outer…
Designed this to hold a headset. Splitted it into two parts to eleminate the need of support material. Just put these things together and mount it under your desk. Attention: the curved part seems to be not at the same level, so your…
This is a shaft for the big spool holder of Mark Wheadon http://www.thingiverse.com/thing:761893 I created this for a spool diameter of 32mm and a width of 64mm. Hopefully this will fit, because I doesn't have Hatchbox filament here. So…
With this part the cable at the top end of the z axis can not move out of the profile. Use this part at your own risk. You could break the part where it should fit into. Print Settings Printer: Cetus3D Rafts: Yes Supports: No Resolution:…
Used and modified the part from tsimon57 (thanks man!). I think the last version (v7) is the best, because there is enough space to fit on the extruder cover and you can screw the fan on the front. The versions before are also very…
These are all currently available results.
