Counting matching models…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Fits standard US 1 Gallon Milk Jugs. Or it at least fits the gallon jug (iced tea) I had around when i made this. It's a 38 mm cap Grip version and smooth version It doesn't leak from the seal or threads when held upside down. Print…
THIS IS A WORK IN PROGRESS AND STILL NEEDS TESTING That said, print flat side down, with supports on build plate only, limited to the knob part. Please provide feedback on fit (especially with pictures) and description of type of golf…
I used these PC4-M10 PTFE Fittings for 4mm PTFE tubing. I used this 3mm ID x 4mm OD PTFE Tubing but the stock 4mm tubing will also work. Replaces the compression plate on the MMU2 with actual PTFE fittings. I needed this to switch to 3mm…
5-6 color print of the Earth with stand and x-section cut away Based off this Thing - Multi-Color World with Stand Space in the base to glue in this style magnet Print instructions Based off this Thing - Multi-Color World with Stand…
Print this calibration tool and create little swatches you can go back to and read off the volume (in mm cubed) of material needed to purge a given color change. All 5 colors swap with all 4 of the other colors in each direction. That's…
Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…
Print this out in the color of your choice, and you will have enough covers for all of the extruded aluminum pieces on the Prusa i3 MK3S (and I think the MK3, 2(s), 2.5(s), etc?). You will need to trim some of it for places where the…
I've modified the frame, struts, and axle to simplify part count, printability, and assembly. Main axle and cross struts now all use the same piece, which clips into the frame. M3 bolts are no longer needed for assembly Axle clip is…
This is a set of chess or checkers pieces with space for a magnet inside so you can play on the fridge or other magnetic surface. Set your print to pause before 4.0mm by adding a color change step (don't change the color, just use the…
For use with this DC-DC Buck Converter I use it to power my raspberry pi with touchscreen using my 3D printer power supply (So I don't need to use an extra plug in the wall) Printed with Black PETG and Red PETG at 0.2mm layer height If…
These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit , which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85…
Print some cool 2-color knobs to replace the stock one. Will fit on pretty much any potentiometer dial Share your makes, let's see some color Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: i3…
16" wide replica of the neon sign from the TRON movie using 2.6mm ElectroLuminescent Wire to simulate neon Printed in Black PETG This print is two main halves, the left and right side, which make up the sign. Plus a back bracket and 4…
These easy guides will allow you to make 2 of the Prusa MMU2 filament trays able to hold 3 filament spools. All spools roll independently. This is great for saving space in MMU2 setup. Parts Needed 4x of these printed guide parts for each…
Block Your Calendar - The Game This puzzle game consists of a calendar base which shows the 12 months of the year as well as day numbers 1-31. The goal is to arrange the 7 unique puzzle pieces to fit within the border, while leaving only…
This is a multi color remix of the MK3 RPi + piTFT cover by acorderob . Changes Added trim details for multi color Made the X button larger Added a RESET word For the touchscreen Raspberry Pi 3 B+ with CanaKit 2.5A Power Supply I plan to…
This cover clips into the Einsy case and supports a buck converter board. Wire the board input into your 24V power terminals on the Einsy, and set to 5V and wire the output to a Raspberry Pi 3 B+ or 4. Print instructions PARTS LM2596…
A muffed tee shot leaves you 230 yards out, the green barely visible in the distance, guarded by sand on both sides, with water features along the way. A 7 iron should do. Ball and plumbob are sent on a line thru the air. This trophy…
For printing, I recommend using the 3mf file or the step file. This will bring the part in with 4 components, one for each color. Each piece takes four 10x2mm magnets . Hold in place with a small drop of medium or thick cyanoacrylate…
About the print This print is part of a larger project I am working on to implement Mycodo into my hydroponic garden. The goal is to have several modules that can connect independently, with ‘break out boxes ’ for different sensors,…
A muffed tee shot leaves you 230 yards out, the green barely visible in the distance, guarded by sand on both sides, with water features along the way. A 7 iron should do. Ball and plumbob are sent on a line thru the air. This trophy…
Organizer consists of 4 pieces. See gcode preview file for build plate orientation on MK3S. Each part assembles with dovetail alignment. Tissue Holder fits Kleenex Travel Tissue packs . Magnet slots fit 10x2mm round magnets and should be…
This is a printable extension for the OXO 15-Piece Kitchen Utensil Set shown here at Macy's. The OXO organizer is great to hold all the utensils it came with, but I have other pieces that were a struggle to make fit. I designed and…
Snap fit design case to hold the Raspberry Pi 4 B from Amazon without the need for any hardware. You can split the file into parts to have the red and green for the Raspberry Pi logo. Some of the features I had in mind for this design low…
Drawing and F3D file available in case your tool has different sized tines. These are designed for this Manual Core Aerator Lawn Tool which is no longer available online. Print wedge side down at 100% infill with PETG or similar durable…
Fits an older Wyze Cam (V2 or V1). Adapts a side clamp style phone mount, which is typically too wide for a Wyze Cam, to be smaller and fit the camera. Use STEP or F3D file to modify and fit your own phone clamp if needed.
These are all currently available results.
