Step Down Buck Board Voltage Converter Upgrade for Prusa i3 MK3 MK3s
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.53 – €0.65 net (excluding VAT)
For file: gcode-buck-converter-clip-on-holder_02mm_petg_m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.59 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 40.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This cover clips into the Einsy case and supports a buck converter board.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 106
- Makes
- 1
- Views
- 1,738
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This cover clips into the Einsy case and supports a buck converter board. Wire the board input into your 24V power terminals on the Einsy, and set to 5V and wire the output to a Raspberry Pi 3 B+ or 4.
Print instructions
PARTS
LM2596 DC-DC Buck Converter
M3 Nylon Black Hex Screw Nut Standoffs
This and some wire and the cover is all you need to bring the buckboard onto your printer. You can use this to power any peripherals up to the power draw of your buck converter. I chose to power a Raspberry Pi 3 b+ and TFT Touchscreen running Octoprint, pictured.