Counting matching models…
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
Order your AC window panel with a universal 15cm holes and instead of screwing-in the hoses you can easily connect them. The internal part requires 1,5cm of space between the body of the actual window and the glass, otherwise you won't be…
This project allows for installing two stacks of: Expandable Steel Sheet Holder (MK & MINI)Expandable Steel Sheet Holder (MK & MINI) in the space below the printer. Printing instruction: - Print two stacks of Expandable Steel Sheet Holder…
Needs 8 magnets 10x5mm. Compatible with https://www.printables.com/model/872878-drybox-to-fit-polydryer-fully-printable Updated with minor improvements to the shape, size, and magnet placement.
Last changes: 25.08.2025 - Changed the shape of 'back shim, and 'inside tpu' - the tpu and the shim on the backside will no longer collide with the Core One frame. 29.08.2025 - Added alternative side panels with elongated screw holes for…
I'm using the cheapest petg that I could find and that may be the reason why the original box came out a little out of shape. The sides would bulge outwards, and the axis no longer fit nicely inside. This remix aims to fix this tendency…
It's much more chunky to battle the increased vibrations when using IS. Upper bracket additionally uses corner screw of the PCB box, use 10mm m3 screw here.
Base for 24mm long tabs. With a stand for it.
Print using TPU with well calibrated printer, and dry filament. Match the chamfer position when fitting to the bottom plug and measure it afterwards. It should be 28,3-28,4mm on the shorter side. The f3d file is Fusion360 parametric,…
It's pretty hard to print, use filament that allows for easy support removal like pla or abs. The model with a hole is for a switch 20mm hole, 23mm external diameter.…
Print without supports. Resized to fit the hole perfectly when printed in PETG Changed the shape of the slider.
More silica, more drybox shelf life.
Added a MMU3 cable pass through.
Makes the filament rolling easier, smoother and quieter!. Uses the same bearings as the polydryer box, and extutim box: 14x8x4mm and won't scratch the sides of the box. Make sure the box walls are straight, if you print the extrutim box…
I needed a set of spool holders for a tight space, even less than is available on Ikea Lack table. I also wanted a spool holder that's easy to operate, screwable to the desk and won't waste even a mm of space. So how it works? You can…
Added MMU compatible markings for open and close positions.
New Polish for 2.0 model
Untested - test subjects… ehm… volunteers needed. I'm sure about the mechanical part of this project, my biggest concern is the wire bundle of the nextruder making contact with the wings when printing PLA. Consists of 3 unbalanced wings,…
These are all currently available results.
