Counting matching models…
This is a snap enclosure I made for my telescope rig to mount the MeLe Quieter 2 to a Skywatcher Losmandy 355 plate. It is a tight fit so you may want to enlarge the model a very small amount (.05) and measure the tolerance against your…
Canon's 10x42 L IS WP binoculars are wonderful binoculars but the lens caps provided are terrible. They're difficult to put on and come off way too easily. They also come with a lanyard which is supposed to make them easily useable, but…
This is a case that I designed for the Xiaomi Mi A2. I originally had a design for TPU filament but I have not mastered the TPU material yet. So I made some changes to the design to make it work for PLA filament. I've included a Fusion…
This is my version of a darkroom test strip make for use in fStop printing and standard printing. You'll need to glue the little indicator triangles to the base. I also recommend using some of those little drawer bumpers on the base to…
This is a copy of the standard metal neg carrier for Omega 35mm and 6x6cm enlargers. You'll need to glue the little hinge pieces on with CA glue.
This is a 35mm neg carrier for Omega 35mm and 6x6 enlarger. You'll need to CA glue the little hinges on (TWO ARE REQUIRED). You may need to carefully cut the guide slots with a razor blade. The gap is very small and sometimes my printer…
This is a snap-in enclosure for the Pegasus Power Box Advanced. I did not use supports as it printed fine without and only resulted in a tiny amount of stringing that I shaved off afterwards.
I could have used bolts to achieve the same function but metal bolts would mar the finish of my telescope mount. So I designed a plastic brake to prevent the telescope from sliding off the mount if the mount clamps are not tight enough.…
This is a model I made for my telescope to protect the interior from dust and debris during transport. It is a 78mm Moonlite Focuser End Cap for Esprit 120mm Telescope but you can resize it for whatever telescope you may have.
I love Canon's IS 10x42 binoculars but there is one annoying flaw in their design. The diopter for matching focus on each optic is very easily moved. This necessitates a recalibration of the optic to get a sharply focused binocular view.…
The hole in this lensboard is sized for modern 39mm enlarging lenses. You'll need some M3 hex screws for the handles on the board.
This is a frame and mask to make flat frame box to fit a light panel which I purchased from Amazon. You can find the light panel here . The light panel dimensions are 46.4x33.7x0.72cm. The telescope I have has a 127mm main objective.…
I had an extra bathroom ventilation fan, so why not use it! This is my solution for cooling my MK4 electronics and, at the same time, venting the inside of the enclosure. The enclosure I have has a side panel that opens and it is the…
This is my version of a copy stand light source. There are two slots above the light which are meant for one clear 2mm piece of glass (TOP) and one which is ground glass(BTM). I used this light source from Amazon . It works well. I used…
These are all currently available results.
