Counting matching models…
This is a remix of "Hooks for keyhole slot shelving" by Scoo. I took the original spacing and base design, but modified the geometry so that the hook can be printed on its side completely without supports. I also created a large hook from…
This is a remix of Prouting's Magnetic Skeletonized Centauri Carbon Toolhead, specifically the front cover with a pocket modelled in to allow the use of a FYSETC 24V LED . I purposely made the fit a bit loose as you may be using an…
This is a Dyson Airwrap wall mount station that can be used to hold the wand and 4 accessories in a simple and secure twist lock configuration. This mount consists of two parts: A wall bracket that you can fasten using your choice of wall…
Magnetic Nail Polish Bead Effect Tool is designed to create the "glass bead" effect with magnetic nail polish. I wanted a tool that didn't require winding a tiny crank, this makes it easier to use while your other hand might have wet…
Magnetic Nail Polish Bead Effect Tool is designed to create the "glass bead" effect with magnetic nail polish. I wanted a tool that didn't require winding a tiny crank, and a smoother and quieter operation from my first model. I also…
This is a basic top tray for the Ikea Helmer. It sits on the top of the drawer and slides back and forth as needed. It is just large enough that it cannot be printed horizontally in the Creality Ender 3 V2, so I had to print it standing…
This is a remix of Pixel 3D's Stock Ender 3 Printhead and Backplate found here: https://www.printables.com/model/514635-stock-ender-3-v2-stealthburner-with-4020-cooler-fa/ Changes include: Added heat inserts, cable management to printhead…
Designed to hold magnets for the velvet nail polish effect. Holds magnets of dimensions 10mm wide, 8.5mm high (for VelvetMagnetHolderSm), and up to 60mm long. Magnets used in VelvetMagnetHolderSm, 3 stacks on either side:…
This is a modification of my model Magnetic Wand Stand for Magnetic Nail Polish inspired by @HanStudios_2167347's Nail Magnet Holder . This one is based on the dimensions of the magnetic wand from Mooncat , and added another holder in…
Magnet holder used for magnetic nail polish in 2 styles (cat-eye and velvet/crystal). The holder is designed to reuse bar magnets that come in the standard magnetic wand- specifically the ones provided by Mooncat, as well as others that…
Inspired by @HanStudios_2167347's Nail Magnet Holder . I wanted to add functionality to the design so I made this model from scratch based on the dimensions of the magnetic wand from Holo Taco and I Scream Nails , and added another holder…
Designed to hold magnets for the velvet nail polish effect. For fingers up to 22mm wide with nails up to 30mm long. Holds magnets of dimensions 10mm wide, 6mm high (total), and up to 30mm long. Magnets used in picture, 2 stacks on either…
This is a stand for displaying nail polish swatch sticks. This has been assembled and tested with three tiers of swatch sticks for a total of 60 sticks for all of your shiny collecting needs. Part models included: Hanger body 1…
This is a mod for the S300 mini-ITX computer case. This mod eliminates the tall bottom feet and top handle, and replaces them with a front frame and lower profile rear feet. This allows you to use the case both in its default horizontal…
This is a Ikea Skadis mount for a Denali Screwdriver (https://www.amazon.com/gp/product/B09PFCX8Q1/) which is actually one of my most used tools on my workbench. The mount uses the T-nut system…
This is a replacement for early model Space Navigator knobs, as over time the rubberized grip starts to severely degrade, characterized by it falling apart and feeling sticky. There are a few revisions of the space mouse. To identify, pop…
This is a replacement gear for the Robovac 11+, specifically the drive gear that directly attaches to the wheel. I created this replacement part as the original had literally cracked in half. While it is often possible to get entire…
Intended to be used Magnetic Mani Nail Polish Velvet Effect Magnet Holder (separate files for both short, long ), it suspends a bar magnet over the top of the Velvet Effect Holder, creating the Velvetized Cateye effect. Requires one…
Designed to hold magnets for the velvet nail polish effect. For fingers up to 22mm wide. I made this one by request as some regions are unable to source bar magnets. This creates a weaker effect than the bar magnets, but it does work. I…
If you have a mix of Creality and other printers, you might end up needing different type of T8 leadscrew nuts to cover them all. This is a very simple adapter that adapts a Creality style 2-screw trapezoidal nut into the commonly found…
I wanted to make a hardware-free version of the Glass Bead effect spinner. I thought it would be fun to add a peep hole so you can see the effect happening as you spin. Parts: The Housing: this holds the spinner above the nail, and should…
The original toothed and F623 idlers attach to where the 2040 and 4040 extrusions cross each other on the Ender. Some printers do not have this type of attachment (such as my Biqu B1 SE). This is a modification of the lower idlers so that…
This is a lenscap for Nikon Z mount that takes up about the same amount of space as the OEM cap, but is double ended, meaning you can attach a lens to both sides of it. This makes for a more functional lenscap that not only performs the…
This is an 'Overmold' style strain relief for 14 and 16 pin microfit connectors, commonly used for umbilical and FYSETC Catalyst toolhead PCBs. Use the 14 pin for common Umbilical (i.e. LDO), and the 16 pin one specific to Catalyst V1.…
This shelf is a single part and is designed to wedge itself on to the crossbars of the trestle. I designed this to move the subwoofer off the ground for vacuuming, but it can be used to hold any number of things in the trestle space…
This is a plate for KevinAkaSam's Belted Z mod that allow attachment of a filament sensor on the top corner of a printer. To use this, use two M3 heat inserts where the filament sensor sits. Alternatively you can just use a nut and screw…
Intro and Features Print and Usage Video here! This is a storage and display stand for Mooncat's Avatar: The Last Airbender nail polish collection. Double hinged box design with the ATLA world map on the front cover Displays the entire 8…
This is a easy to print TPU cable wrap, meant to be completed with a riveted snap button kit (e.g. https://www.amazon.com/dp/B087C1XJ6G ). Simply print the cable wrap in your favorite TPU and finish with a snapbutton pair. To use, wrap…
This is an Ikea Skadis stand designed for a Withings Scanwatch 2 and its charger. Usage is pretty simple- pop the charger into the bottom recess and hook onto your Skadis. Print settings are flexible but unfortunately you do need to…
Similar to my concept for a double-sided lenscap for Nikon Z , this is a cap for Canon EF lenses that is just a bit taller than the original lenscap but is double-ended, meaning you can attach a lens to both sides of it. This makes for a…
These are all currently available results.
