Counting matching models…
A small tool to help setup you boot centered over the board, simply mount your bindings as normal and check toes and heel sides are even, the lines on the base are in 2mm increments. Comes apart so and fits in your pocket or tool kit. The…
Basic holder for the WAGO 222-415 terminal block. The block can be pushed in from the side and is held in place by friction.
Double line reel for control line model flying, it can hold two sets of lines. Very practical for F2D combat. You need to print 2x "spacers" and 1x "main body" The spacers slide on the main body, glue them in place, use epoxy, or CA…
Basic holder for the WAGO 222-415 terminal block. The block can be pushed in from the side and is held in place by friction.
Antenna mount for ZOHD Drift. The mount takes a pig-tail that comes with most VTX's and mounts it solid in the plane. You need to cut a hole in the plane to fit the mount. The thin sheet will add some additional structure to the area to…
A fuel pincher for F2D combat, to pinch fuel tube It uses the Ruthex M3 inserts Print Settings Printer: Prusa Mini Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: Prusament PETG Notes: Fuel pincher for F2D combat Category:…
Hook for storing F2D models on an ikea curtain rod Printed in PLA 0.2mm Screw hole and pull off handle are "unlucky" placed Category: Other
This is a carrying case for the different heads for my F2D FORA engines. I made a few different versions of it that can hold 4, 6, 8, 10 or 12 pcs. The case is designed to prints the two parts interlocked (as one piece). The clearance is…
Made to fit in the glowplug hole for holding on to a head so then head can be cleaned faster in a chordless drill. UPDATE: I found a small mistake in the STL file, I have updated it with the new one Print Settings Resolution: variable…
Case to host the eletronics, batteri and antenna for the WilCo system. The lid should be printed in a semi transparent material, so that the LED is visible.
MUST BE PRINTED IN ASA OR ABS! I have tried PETG and it is simply not strong enough, must be ASA or ABS In order to mount this you need to use a M3 heatset insert (ex. from Ruthex), then it can be used in place of a normal nut. The valve…
Very practical for F2D combat. The side and main body need to be glued together with CA or epoxy. Suggested filament: PETG PLA will get soft in the sun.
It is printed in 3 seperate parts. Case and Bottom must be printed in ASA, they are fuse together with a few drops of acetone. I mean a few drops (3-4), it does not take much. The lid can be printed in PETG or ASA, I find tape sticks…
This is a mounting plate to be used for the shutoff, it has cutouts for the switch, button and LED. Recommended to be printed in PETG or ASA. The PCB is simply held in place with some hotglue.
Same as the original, but without text, incase you want to add your own spin to it
Larger holder that fits 103mm record costers
These are all currently available results.
