Counting matching models…
I modded the original cover to mimic the new open cover that comes with the kits. This is modded off the STL so there are small imperfections. I test fitted this on versions 1.0 and 1.1 of the pro PCBs. The top part is thicker for…
The covers slide in towards the negative side and then click in on the positive side. They are held in place by the batteries. I use Eneloops but if your batteries are skinnier you can scale up the Z to make the covers tighter.
I printed this in TPU. Probably could use some wall optimizing in the slicer to reduce retractions and eliminate a lot of the stringing with TPU.
I modified the original housing to better suit my needs. This is for the original 2.1" Lilygo screen. I printed both parts in PETG just as they are saved in the STLs, for the back I used a 5mm brim with 0mm gap and manually added…
Round Model: I reused some of the base parts to make a headless round model and to shrink it down some more. I use the scale with Gaggimate via Bluetooth so the display is not needed. BeanConqueror also works with it. Parts needed: m4 x…
I am not using the cup that came with the grinder as it does not work well with the 58mm portafilter so I designed a holder for the generic 58mm dosing cup. It can be adjusted up and down slightly. For version 7 an allen wrench with a…
This is a remix of an excellent model and writeup by @Ali_531349. My build uses most of the items from the original BOM except for the ESP32, I used a C3 Supermini. In some builds I have used the aht20_bmp280 combined sensors, these have…
Enclosure for WS2812 8 LED light bar. Has holes for magnets (8mm D) and cover snaps in. I designed this for Gaggia Classic machines but can be used for anything. I am using an ESP32 C3 to drive it with WLED but ESPHome can also control…
I got tired of using mounting blocks with zip ties and designed this wire clip for ease of adding and removing wires. As-is these will fit on a roll of 3M double sided 1" tape but can be resized. Print laying on the side for strength.
Made it larger to fit 65mm Center Cap on 19" Crossflow wheels on 2026 Model Y Juniper. The cutout is not scaled so you can use the original inserts. I used the largest ones. I would test fit these first without the insert in case they…
I made this to be able to set a perfect pitcher height when steaming milk so I don't have to hold it during the later part of steaming. The base height adjusts from 27mm to 38mm. In retrospect it might be better not to use fuzzy skin…
These are all currently available results.
