Counting matching models…
This is a problem that has plagued me for over 20 years. I was so pleased to see several 3D printed solutions. Unfortunately the original design by guss67 typically requires supports. To combat this there are designs that print in the…
I designed this replacement bezel, as I could only find one design and it didn't fit, even after scaling it up. So I designed this one from scratch. It has been designed in OnShape if you would like to make any changes. I've made two…
I wanted a compact case to house a Heltec V3 and an 18650 battery. I was unable to find one I liked, so I designed one. This was designed in OnShape if you would like to make some alterations. Features Changeable faceplate Battery Kill…
Many thanks to @Marlfox_1264389 for the parametric remix and of course to Scott Yu Jan and Overwork for the original design. I've made my modifications in OnShape if you want to edit it. If you have a Quad Lock case, you know it's not…
Short legs version for Siboor/Makerbeam extrusions, and the stumps version won't interfere with no drop nuts.
This needs a little bit more work. But is mostly functional for now. I had a bit of trouble fitting it square to the case. I broke the screw hole tab. I would love to make this printable without supports, fit a wide range of cases, use…
I was annoyed when the original model was only slightly too wide to fit on my Voron V0.2. So I made a simple edit using MS 3D Builder. For anyone else in the same boat
I loved Necrosster's design, because it looked very similar to the original. I still had issues with the fit, I didn't like the large gaps, And the little legs would often break on me too. I suspect this is best printed in PETG. Allowing…
I liked grizziel17's model, it's very simple and designed to print without supports. Note: this is for a custom cut shelf to fit an IKEA Billy bookcase, it is not meant to be used with IKEA shelves with the round cut-out for the IKEA pins…
A Corsi Rosenthal box inspired by the 3d Handyman's Model B design. I like the look of it and it and filters can be changed out in seconds unlike the original CR box which requires duct tape or hot glue. I live in Australia and parts and…
A simple way to remove excess air from resealable bags. Modified the design from onshape by Vincent Schouten, changed dimensions to suit our Dyson, and added a lip to prevent the bowden tube from getting sucked in.
Biketiger's desiccant container is a winner! it's strong, and the perfect size. I just wish it printed faster. My quick solution is to allow the slicer to use expose the infill patterns. You can customise the style and the density. My…
I bought a “Pinnacle” brand shelving unit from Bunnings, The vertical posts are half height and joined in the middle. One shelf is meant to be in a fixed position to strengthen the join. Unfortunately I did not want a shelf in that exact…
I loved Hana's design. it's very elegant. Unfortunately Czech spice jars are much bigger than the ones we use in Australia. Being smaller jars, I don't think we need the middle support and I reckon we could get away with 6mm dowels. Using…
Remix of tchimmy's external trays for the deep bins. I had a dice set that didn't fit, You can see the original design in yellow compared to the remix in orange. The D20 measures 29.5mm at it's widest point. Replaced the D4 pyramid…
The original design did not fit the HP Eliteone 800 G2 AIO. Even though at first glance it looks compatible. The diameter on the base is different. I'm not sure what other models use this smaller size, but I'm sure it's not a once off.…
For those that don't know, the squat position, is the natural way to poop, it allows for a smooth exit. Having your thighs horizontal causes you to strain more. I didn't want to pay full price for a squatty potty and wait for delivery. So…
I had an idea to combine multiple thin rods as a substitute for larger tubes, pipes & rods that are used in many existing projects. PROs Cheap Readily available Easy to cut Kid Friendly Able to flex Biodegradable Lightweight CONs Not…
I love building PCB keyboard kits, but don't like how they look from the sides, or how they sound. This is my first attempt at a case, and I'm fairly happy with it. This case, uses all the original parts from the kit. (Mine was self…
Don't ask me why, but we have 3 rolling pins, all different sizes. I had originally planned to use the holders to prop up the rolling pin, rather than the handles. So I measured and resized 3 different brackets. I did not measure the…
Unfortunately my screen was misaligned, and the protruding frame of the original design chipped the corner of my OLED causing an interesting interlaced effect.
If you order a Dell PRO Slim plus with an optical drive, it comes with a drive cage to mount a 3.5" hdd. But no screws. The screws on the website appear to be $4AUD each Here are 4 solutions that can use existing hdd screws you have lying…
Used to hold cylindrical objects with a clamp or vice. Designed to be used with Michael Hornung's Miter Box Can hold up to 3 rods between 6-12mm diameter. You can choose to use 1 - 4 jaws to hold your work. 6mm rods will be too small to…
2024 Update: I redesigned it for a tighter fit, this time I printed in ABS & sideways with supports. I looked for existing models and used generators but none would suit. The main issue is the clip was not centred. I found a design on…
I was looking for projects that would suit my bamboo skewer to 8mm rod model and got inspired by ShelXle's spool holder but it was for 10mm rods. I resized them in my slicer and they worked well. With an 8mm rod it is the perfect size for…
Our beloved vintage crockpot, is still going strong despite all the brown plastic parts cracking. side handles, feet, and now the lid handle. I went to glue it, but it split once I turned the screw in. I did a couple of quick searches,…
We have ring holders, which have to be removed when using a wireless charger. So I've designed a ring shaped gadget that can be attached near your wireless charger so you don't lose your accessory. Ring holders and wallets are two…
This is a simple end cap, covers the bare aluminium profile. And offers protection for your walls (If you're like me and constantly bang the ends of the track while lifting it into position) My original one broke, as I took it off…
Our oven display doesn't work, so I bought this BBQ thermometer. I glued magnets to the oven and thermometer. But I think the heat from the oven was too much for the glue and the thermometer. Other issues we had was always accidentally…
My new door slides were hard to open & close. They were very smooth when sliding but overcoming the bump to lock it in the closed position & vice versa needed more force than I wanted. After asking on reddit, It was revealed that a rubber…
These are all currently available results.
