Counting matching models…
I'm not sure if it can keep up with a store-bought cover in terms of quality. But it could be useful as a quick interim solution. There is a small pocket on the inside for holding a credit card or some money. Print Material: TPU / Flex…
Measurements should be close to the original (but not 100% accurate). Used to create https://www.printables.com/model/1161920-cover-for-samsung-galaxy-a16
The idea was to use one per battery. And write on each side if the battery is full or empty. Push the battery from the open side until it snaps in.
To cover and protect your [N gauge / N scale / 1:160 / 9mm track gauge] rail during paint or gravel.
Print without support;
To change the gearbox oil on a BMW R1100R motorcycle you need this to prevent a mess. I don't know how the original "Ölablaufrohr" part 234680 (23 4 680) looks. But this fits on the R 1100 R. Probably other “R” models also. Please let me…
Look at the pictures to see how to assemble it. Updated 2024-01-23: Made the rim/spring stronger. OK now, but still holds not perfect together. Consider to glue it ;) Chamfer instead of a fillet (suggested from @LibertyBeta_67371 )…
To snap into a chassis and fiddle a cable through. Customize with OpenSCAD to fit your needs. Use flexible filament.
Clamp caps get frequently lost. I found a replacement ... ... but i found it difficult to fit it in the slicer by trial and error. So i designed it new from scratch. (Afterwards i discovered this ) Anyway - here is my version.
Optimized for FDM printing. The retaining clips are unbreakable and have a slightly elastic shape.
Customize it with openSCAD. Experimented with the awesome openSCAD lib Round-Anything from Kurt Hutten. Print it face down with manual color change.
Difficult and tedious to print with manual color change in PETG. A M3 x ~12mm screw is required to fix the end plate. For a perfect printing result, 7 middle parts should fit on the axle and the stop pins prevent the thing from being…
Minimal clock-face to glue on your cheap, ugly wall clock. Resize it, to fit you needs.
Because i bought a set of some different blades but just one handle, i made my own handles. Print Chip The 2 halfs are mirrored. Print both without support. Additional Parts A deburring tool blade (e.g. BS1010, BS1018, BS1012, BK3010, …)…
Printed with PETG and a 0.25mm nozzle
You need to print the original model from @neoyarus. Just replace the cover part with this. I think it should fit for the normal and the tight version.
OpenSCAD parametric nut knob. Default setting for M6.
As a replacement for a broken glass lamp shade. To blind the bulb, the through slots are not radial. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: No Filament: GEEETECH PLA white…
I used these nuts to attach it with M3 screws to my printer. If you need bigger holes, just drill them. You may find this and this also useful.
I've printed it with different settings. Best result was with a 0.8mm nozzle in spiral vase mode. Don't use hot bulbs!
Use this part (and you need some more) to mount it on your Prusa MK3 printer.
Adapter for Vacuum Cleaner "Kärcher WD6" (with small hose) to orbital sander "Bosch GSS 140-1 A"
If you mistreated your TV Remote, it may be broken like mine. Use this print to hold it together and protect it on future drops. Printed with elastic filament: extrudr® FLEX MEDIUM A98.
Thank you Sebastian (@Sebas) for sharing the FreeCAD source file. This is well done. I learned how to make such shapes. This is the cover for the upper hinge. You can find the matching cover for the lower hinge here .
Pipe diameter: 26mm Gap between pipes: 19mm (FreeCAD files are included - resize it in “Spreadsheet”) Required: * M3 x min.25mm - ISO 7762 Hexagon Screw * M3 Nut
Here is my variant of a face mask ear saver. You can thread one side through the holes to fix the mask permanent. Use the hook on the other side to release the mask faster. PLA is flexible enough, but other materials should work also. It…
Seal the pipe end with this TPU lid. Fix it with a zip tie on demand.
I found the axis of my Motorbike rusty inside. So i think it is better to keep the rain out. Just snap this on. The hole on the bottom is to let the moisture out and to remove it. It should fit on Motorbike BMW R 850/1100 R/RT/RS/GS (And…
A kink protection for round or ovale section shaped cables. Print it with some flexible Material
I made some fly screens ( https://www.amazon.de/dp/B0797TLCNQ ) leaving me with a lot of remaining material from the aluminum frame and the net. To squeeze out more frames i built this missing connection part. It is hidden inside the…
Clip in Cover for Cover Frame - Switch Range / Series "Europa" from KOPP (width 51mm / corner radius ~3mm) Category: Household
My first try to use "plasticity" CAD. (I love it.) Sadly it's not possible to upload a *.plasticity source file here. Easy to print. No supports needed. New, better Version for Magnet Use this if your roller blind chain is made of…
Spin it and focus at the center of the spiral for 10 seconds. Then look somewhere else. Objects seems to shrink or grow (depending on rotation direction). Or hypnotize a victim and force it to wash the dishes. But always act responsibly…
Speaker Housing for Speaker Size: ~ 99x45x21mm/3.9x1.8x0.8in Impedance: 8Ω Power: 5W Snap in mount
Print in place. No supports. Use gentle force to brake eyes rotatable after print. A thickness of 2.5mm seems sufficient to hold the rotating eyes inside the socket. But strong children will squeeze them out bare-knuckle :) → .( Increase…
A piece of filament is pressed into the teeth by a ballpoint pen spring. It hold the lever in place and makes a satisfying clicking noise when turned.
Original handle broke - this is a simple replacement.
Snap fit. Removable for the next battery swap. Warning: I regret buying these sensors for the whole house. The batteries discharge very quickly to 0V when the Zigbee connection is lost. (This damages the rechargeable batteries.) With some…
Warning: Don't use halogen bulbs. They will melt it.
Used to create a soap mould form. My first steps on using Plasticity CAD.
In addition to https://www.printables.com/de/model/677515 i made a cover for the small sockets without ground-contact. I'm not sure about the standard-measurements and if there are any ;) But i have tested it with several sockets.…
This is the cover for the lower hinge. You can find the matching cover for the upper hinge here . You may need to mirror it in the slicer, depending on whether the door is hinged on the left or right.
Glue up a sealing tape (~20mm*5mm) all around and plug into the tunnel from the outside. I've printed it with transparent PLA. The infill with several unconnected chambers to insulate better.
I had to seal some Bauhaus boxes to keep mice out. These boxes have a rectangular handle recess of 140 x 28mm x Wall 16mm. Some smaller boxes have a beveled outer structure. Therefore I designed two different holders. I hate it to mess…
Print without support, 15% infill, scarf seam.
I've lost the original part. So I designed this part by empirical intuition. The snap in version was too weak with PETG, so i've designed a version for a M3x10mm screw. Assembly was fiddly but the grinder is on duty again.
You need to print the grey part normal and also mirrored. Connect it with the slider part. It should be possible to resize it horizontally to fit your needs.
Replacement for a lost lock part for my cheap no-name pruning shears. Version 2 works better than the original design. Optionally it can be secured with a small wire (diameter: 1mm). Just cut a paperclip and push it in the small hole. See…
This happy little Smiley is having a lot of fun during your prints. The eyes can rotate independently if the Smiley gets dizzy. Model Designed with OpenSCAD. Print Face down / No support needed / Change the filament color after some…
Mount an esp32 camera module on a "Topas Sonic" water meter to read the value with "AI on the edge" for "Home Assistant"
Original thing was created by Thingiverse user Joesevens
For attaching the soundproofing mat in the hood. I printed this with PETG-CF. The mat appears to be securely attached. But I'm unsure whether the part will retain its shape under the harsh conditions in the engine compartment. Update…
Original measured and recreated. Seems to fit well.
To suck liquids from the floor with a bilge pump.
The lid of my top case could no longer hold its open position and was always closed due to the force of gravity. This small replacement disk solved the problem. To mount it you have to drill out the original rivet in the axle and rivet it…
I recommend to use the rearmost variant. If you want to use PC4-M6 fittings (it's optional) you have to drill with a M6 thread cutter before. Avoid using tubes that are too short so that tight radii do not occur when the print head…
Owners of a good can opener can use it to give used cans a new purpose. Parametric design with FreeCAD.
Dust cover for magnifying glass from VELAMP d=109mm h=14mm
To protect the floor or to prevent the robot vacuum cleaner from getting stuck. The laundry hangs higher. To prevent the wheels from shifting axially, you can simply use cable ties.To protect the floor or to prevent the robot vacuum…
The arm rest foam rubber pad of my beloved and great office chair “Rohde Grahl - Duo back” aged not so well. It seems there are no such spare parts available. So this is a simple slip cover printed with flexible TPU.
Use PrusaSlicer to add a custom text or just use a permanent marker to write it by hand. I suggest a biodegradable, UV-stable material if you use it outside.
Print the bumpers with TPU / Flex Fix the Sidebumper with an M3 Screw
Broke two keys with the leg on boarding. This should protect the key.
Remixed version of model from @Billiam and @Ravenwreck
I've designed this caase to mount for a 5mm infra red LED on my old amplifier. This LED emulates an IR remote control and makes my HiFi AV amplifier smart. (Followed this instructions…
Easy print in 2 parts. PETG recommended. Put together and optionally screw it with M3x4 or M3x6mm. Clip on your headlamp. (Diameter 23mm / Bracket distance 50mm / e.g. Sofirn H05A or equivalent)
Use a cable tie as a strain relief. Screw it under a table.
Replacement for broken wooden hinge
To keep cheap wire gates in position and shape, if your croquet ball hits the gate post.
The mount/clip is for a 20mm rod. (Could be easy resized with Freecad). The U-shaped clip can also be secured with a cable tie (through the hole provided for this purpose). If the star is too loose, simply glue it on or wedge a piece of…
To label your Christmas presents
Box printed with PETG upside down with no support. Mounted with zip ties. Hinge could be a 3mm axis or just use also a zip tie.
This is a cover for a EU three cavity wall box / appliance box. The frame is screwed in place. Any front panels can then be inserted. These are then fixed in place by inserting pins. All screws are then concealed. I use this to mount an…
Printed with extrudr® FLEX SEMISOFT - Shore hardness 85A
* Closed design: To install, one of the two original end caps must be unscrewed. (2 screws) * Snap-on mount. Not tested by me
An adapter to mount this phone holder to the stem of my KTM macina bike with zip ties
..Thanks @wowaT_381086 for providing the finder geometry. Use a self-adhesive reflective strip to turn it into a reflector. To be on the safe side, I secured the lid to the top with some fabric tape. There's also a horizontal hole so you…
These are all currently available results.
