Counting matching models…
I designed and printed it to replace my partially-broken funnel. According to the serial number on my funnel it's 3016JA2004 (no E at the end), but online this spare parts seems to be called 3016JA2004E. My design is not perfect since I…
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant
Box inserts for organizing the pieces of the 2016 board game The Dragon & Flagon, from Stronghold Games. This is composed of 11 pieces using 3 models: A character tray for holding a character's 18 cards, cardboard standee, square…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
This is a multicolor chess board with a recessed knight symbol on the back, separated into components for easy color assignment in your slicer. It can slide into a matching divided box that can be used to store chess pieces, in which case…
I wanted a brain keychain as a novelty giveaway at a brain-related conference, and found the excellent https://www.myminifactory.com/object/3d-print-brain-keychain-50692, but it's annoying to print due to non-flat bottom and needless…
This is a 5-color globe in high definition, with topographic and bathymetric exaggerated relief. It defaults to 32cm diameter, but can also look good in smaller sizes - cover picture is a 20cm diameter version. It's provided in two…
MarcMartin3dnd over in Thingiverse published this excellent model, based on the sample map in the 5e Dungeon Master's Guide. This is a version of this model optimized for the Prusa XL, specifically: It's made of two huge parts (that…
The model is a combination of the three melting wax candle models published by Tanya Wiesner at https://www.myminifactory.com/object/3d-print-melting-candle-tea-light-candle-holders-46606. I also added negative volumes at the top of each…
This is a remix of jman1865's Magic the Gathering counters: I just made the counters double-sided, with +1/+1 on one side and -1/-1 on the other. The box from jman1865's “MTG +1/+1 and/or -1/-1 counters with case” will fit 19 of these…
This is a model of the beer mug used for “buffing” beers such as Pots O' Gold, from the video game Deep Rock Galactic. It's sized to fit a 355mm/12oz can precisely. The color scheme in the photos and file uses the color scheme from Pots…
This is a remix of CdR 's “ Spiral Chess ” model, but with a different head for the knight piece, a slot in the bishop piece, and prepared for multicolor printers by applying the “enemy's” colors to the inner spiral of each piece. The…
A small corner shelf, rounded toward the far corner. I use it to place my mug on when I need a free hand to open the door. The top has a small lip to prevent things sliding off. Default dimensions are 13x13 cm, screw holes are 4mm. Print…
MakeyMcMakeFace published a simple and easy-to-print measuring spoon, this is the same but with a longer handle: one version is 10cm longer, the other is 20cm longer. The +10cm version needs a print bed which is at least 18x18 cm. The…
This is a deck box for a Magic: The Gathering Commander deck. It has a commander compartment, a small compartment for token / accessory cards, and a larger compartment that easily fits 99 single-sleeved cards. The box has a lip on top and…
The symbol comes in two versions - one roughly 16cm in diameter and one roughly 8cm. Both are 5mm high and have a 9x4mm hole in each of the six components. The connectors between the components are intentionally very thin, to allow the…
Do you want a little Tallneck of your own? Are you too lazy to paint it properly? Do you have a 4-color FDM printer? Are you mentally prepared for a challenging print? Look no further! What is this This is a model of the Tallneck machine,…
Teirale published the excellent supportless mimic model https://www.printables.com/model/152255-34-mimic-chest-no-supports-needed . This remix applies 5 colors to the model, for printing in a multimaterial printer. Two of the colors don't…
This is a remix of jman1865's Magic the Gathering loyalty counters: I just made the counters double-sided, with 1 on one side and 5 on the other. The box from jman1865's “MTG Planeswalker Loyalty counter tokens with case” will fit 15 of…
Simple holder for a pen, marker, X-Acto knife or similar tools, for a 1/4" pegboard. The “cup” dimensions are 25mm diameter and 80mm depth. Print as oriented in the STL file; the only parts that then need supports are the pegs, and they…
This is a super-simple stand for a spherical object, such as a globe. Resize this so that the stand's radius is the same as the sphere's. No supports required, and it feels pretty solid with a 10% gyroid infill.
Insert for base game version of Exploding Kittens ( https://explodingkittens.com/ ), which can also be used as a draw / discard pile tray while playing the game. This remix can fit cards sleeved with “inner sleeves”, which have a 64x89mm…
Wavy versions of the Israel and USA flags crossed together. Aspect ratio is 1.6375, which is the average of Israel's 1.375 and USA's 1.9. The poles extend into the center of the flag area to improve structural integrity. The model is…
A Gridfinity tray for iGAGING Absolute Origin 0-6" Digital Caliper, model 100-700-33. It's a little rough and not properly horizontal, but it's functional :-) Gridfinity notes: 2x6, 2u. The caliper protrudes above the tray height so…
This is a Hannukah dreidel intended as a test model for checking supports with zero Z distance such as soluble supports or PLA-PETG supports. Print this without reorienting the the model - so, upside-down. It will involve: Tiny details…
Cards in the game Taco Cat Goat Cheese Pizza often deform due to the violent nature of the game, so end up not fitting neatly inside the original cardboard box. This “fat” version of the card box by “3D Printing Dude” fits the game well -…
A decoration to hang on a wall or otherwise display, depicting five circles for the five basic mana icons in Magic: The Gathering (WUBRG), oriented the same as on the back of the cards. I printed it on a 5-color machine with a manual…
This is a remix of Kenji, a nice little print-in-place articulated robot. This is the same, just with 4-colored multimaterial painting with PrusaSlicer. My son picked the default colors :-)
These are small holders for the "Monopoly Player Numbers" model by "Ivan the Terrible". They interlock with each other for ease of storage.
Use these to track SP usage when playing Middara - just place an SP counter in the slot matching your current SP. The counter includes a groove at the top for square effect tokens such as haste, and holders up front for round ability…
I got a Weber 6750 Instant Read Thermometer, but found out it doesn't have any loop to hang it by. So this is a small adapter that can be hung on a hook and then hold the thermometer. Best printed on its side, using organic support for…
This is a simple gridfinity storage bin with 6 sections, designed for storing bills or similar items, up to 165mm wide. Each section is slightly angled back to better display its content. For example, it nicely fits US dollar bills.
This is an open container for 6 cylinders such as bottles or cans, decorated in a a pattern inspired by “Japanese wave” motif, also known as seigaiha. Its voids are 85mm in diameter, sized for large water bottles - but it can be easily…
User Shonk made a great little widget for tracking actions and reactions in Pathfinder 2, and was also kind enough to provide a blank version. This remix uses four arbitrary icons to assist tracking other kinds of statuses, for example…
I've been using the excellent “Last Spoolholder You Need (LSUN)” for years now with my Prusa Mini. You have to print the “big roller” to be able to handle 2.5kg or 3kg spools, but the problem then is that smaller spools can sort of travel…
This is a caddy with a tall handle and low decorative walls. It has four slots for adding optional dividers. The handle is printed on its side and then slotted in from the bottom, for optimal print orientation strength - see image.…
Playing dreidels for gelt is boring when you're just spinning them randomly and hoping to get better letters! Instead, compose a bottom, shaft, and multiple modules together to construct your own battle dreidel, then battle your foes for…
These are all currently available results.
