Counting matching models…
Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…
Quick release (keyed-slot) analog module bay for Walksnail Goggles X and DJI V2. Have a look at the awesome original model first. This remix replaces the main body and the “B” mount adapter plate that gets screwed to the back of the main…
A small adapter clip to screw a Caddx Ant Lite into a Mobula6/7/8 canopy using M2x4 screws and M2x3 heat inserts. M2x3 heat inserts from cnckitchen Be careful while melting the inserts in as the plastic walls are very thin. I added a…
This is a holder to attach an airpump to any Marolex Ergo pumpsprayer, turning it into an automatic spayer for less than 50€. Drill a 10mm hole into the tank, then screw in an aircompressor fitting with an integrated seal like this one:…
Drill a 10mm hole into the tank, then screw in an aircompressor fitting with an integrated seal like this one: https://www.amazon.de/dp/B093BJBKG4 You have now converted your manual pump-sprayer into an automatic one. Holder uses 3x M3x10…
Simple but reliable, universal adapter board using heat inserts and screws. I did not like any of the existing adapters as they are either a pain in the ass to install, expect you to screw into plastic or use flimsy pegs. Print from…
A super slim mount for dual TrueRC Singularity antennas for the AOS 3.5 Evo Frame. It has been reinforced to be as crash-resistant as possible. Print in 95A TPU with tree supports.
This is a holder to attach an airpump to a SOLO VarioFoam 303 pumpsprayer, turning it into an automatic foam spayer for less than 50€. Also fits the 2L upgrade tank. Drill a 10mm hole into the tank, then screw in an aircompressor fitting…
There was no mount for a PXN SF U Shifter to a Logitech Challenge X and the existing one for the Moza shifter has been done in crappy STL format which is totally against the community-centered 3D-printing idea, so I remade everything from…
Do not use any carbon filled materials, they are conductive! Do not use PLA, it will melt. Use a UV-stable, heat-resistant filament like ABS/ASA/PC/PCTG. I did this remix to fit a 820mAh Lipo and a micro-switch I had lying around.…
This is a holder to attach an airpump to a SOLO CleanLine VarioFoam 333 pumpsprayer, turning it into an automatic foam spayer for less than 50€. You can get a plug-and-play aircompressor fitting here Or drill a 10mm hole into the tank,…
These are all currently available results.
![TrueRC Singularity Dual Mount [ AOS 3.5 Evo ]](https://media.printables.com/media/prints/663860/images/5227714_94f66649-2502-424c-a2a5-5accd57e444b_dfe05f95-6035-4e85-83a4-f60f0dbf0957/dsc05463.jpg)
