Counting matching models…
THIS PROJECT IS ON PAUSE I just don't have the time anymore right now. I regularly get messages from some of you for the source files. So I released them in the zip-archive called "source" as .ipt (Autodesk Investor) and .stp. Right now I…
I didn't want to make 4 differents projects for parts I don't know, if they will print fine. So here you have fixed models from the game, the raider-style power armor, X01, T51 and the T60 - all posed like in the loading-screens. I hope…
Thissimple mod replaces the top part / lid of yesimjess' Paintbrush cleaner. I found the screw-mechanism quite timeconsuming. So I replaced it with a leaf spring and push button assembly. No additional hardware is needed for assembly. The…
This is a quick design I came up with because the holder / clip on my Kärcher WD3 Premium vacuum cleaner, which attaches the suction-thingy to the machine itself did broke. Maybe someone will find it usefull as well. Category: Parts
This is a remix of: https://www.thingiverse.com/thing:3544399 and: https://www.thingiverse.com/thing:517581 The "Remix" function did not work to link the source files properly....potate-verse at it's finest. I split the tube into to…
This is a model of the Gaping Dragon from the first Dark Souls. I really like the design of this boss so I tried to print myself a copy. The model / mesh was posed using the bone function in Autodesk 3ds Max. The part where the wings…
This is a model of the Sentry Bot from Fallout 4. It's split up into multiple parts which have to be assemble to make it possible to print. Also all files were checked to be manifold. The legs and arms were reinforced to make them more…
This is a model of a crystal lizard from the Dark Souls series. Have fun with it :) Print instructions Category: Video Games Print Settings Printer: CTC 3D Rafts: No Supports: Yes
I was really looking for a good fan duct for the Bondtech BMG setup on my CR-3D C1. https://www.cr-3d.de/unsere-produkte/c-serie/ But obviously this fanduct will fit on any setup with an E3D V6 and Bondtech BMG Extruder (Volcano Version…
This is a model of Liberty Prime from Fallout 4. I took the model from the game, edited, split and repaired it for better printability. Most parts have a big surface on which you can put them, so you won't need raft. There are two…
This is the model (from 3dsMax) for the new Nuka Cola vending machine in Fallout 4. I have uploaded this model on request - if you are going to build one by your own feel free to share the pictures! Print instructions Category: Video Games
This is a version of the all new Laser Musket from Fallout 4. I ripped this model for a friend and thought, I could also share it with you. Have Fun Print instructions Category: Video Games
Here is a model of the Cryolator from Fallout 4 - I fixed it with Netfabb and it should be printable right now. You will need much support - although you may flip it 180° and print it upside down. Have fun! Print instructions Category:…
I really liked the Intel Space Capsule design they send to numerous youtubers / reviewers for the Haswell-E (5960x) and PCI-E SSD release. I contacted Intel, if it was possible for "normal people" to get one - but they said no (at least…
I came up with this design to easily transport my miniature paints. It can store up to 60 dropper bottles and fits nicely in the carrying caddy for these sorting boxes: Amazon sorting box
Here I present you the new version of my large format CoreXY 3D printer known as CoreBot. The main goal was to make the built mord affordable, easier and cheaper to built.For this reason the linear rails were replaced by rollers in an…
This is a quick mod I came up with to mount a genuine PanelDue 7i to the front of my Voron using the great work done by: Jurii (Thing 4555514) Tactical_Pickle_Gaming (Thing 2896405) LumberjackEngineering (Thing 2799628) driftology (Thing…
Just pring out the corner pieces and start assembling your modular organiser dream. It is designed for 3mm sheet material (i.e. MDF, Composite panels etc.). Obviously you may scale the design the fit different thicknesses.
I wanted to built a really reliable printer which is reade for the E3D tool changing mechanism, when it is finally realeased. At first I planned to built a Hypercube / Hypercube Evolution but soon found I that the design was not stiff…
I wanted to build the Anycubic Linear Plus Acryli Enclosure by kelvinA, but I needed a top cover to make the printer suitable for printing ABS. I also wanted to integrate an air filter, extruder and spool mount into the top cover. So…
This is a model of the Institute Rifle from Fallout 4. I have seperated the gun into smaller parts (Front, Reciever, Stock) to make it easier to print. The reciever comes in two seperate versions - the on with cap is easy to print because…
This is just an adapter to use an M4 nut and screw for the assembly of the "slider" because I didn't have a M5 screw that would fit. Print instructions Category: Mobile Phone
This is a modification I came up with for my CoreBot V2 printer to convert the linear motion system from Rollers to MGN12H linear rails. I also added a (somewhat) quick-change system for the tool head as well as support for the E3D Hemera…
This is the xy motion system of my CorEssentials 3D printer. I think that this system might be interesting for anyone to use in there 3D printer. It is a CoreXY motion system using a base plate (I use 6mm aluminium composite panels)…
I came up with this quick design to wire manage the cable management of my larger 3D printers. This fit the generic BOSCH-Type / B-Type Extrusion as sold by i.e. Motedis. This clips are for 30x30mm extrusion profiles using Slot 8 (8mm).…
I modified the great model by MW-Mechanical for my needs (6 digits instead of 4) and added an multi-color-option.
I bought a used Raise3D N2 Plus in really rough shape. One of the missing parts were the cooling fans for the tool head. The standard fans are 2x 35x10mm axial fans which are used for cooling the heatsink of the hotend (coldend) and for…
I got a partially kit of a Prusa mini From a friend but some parts were missing. First and foremost the hotend. So I came up with a quick design to mount one of the hotends I had laying around to my machine. In addition to the "original"…
I needed a box for my gaming tokens so I quickly designed one. The Hexagon pattern on the bottom pieces comes from Slicer-Settings where I removed the top and bottom layers in the lower part of the print (refer to the SuperSlicer…
I modified the great design by Narasak Mansurang to mount the enclosure to 2020 and 2040 extrusion profiles.
This is a quick mount I designed to mount the pump / resevoir of the EKWB fluid gaming set more to the top in my Thermaltake Core P5 case. The Mount uses only hardware that is included with the fluid gaming set and is pused into a hole in…
I desided to make some improvements to my delta 3D printer (Kossel mini). So I re-designed everything and build a complete new frame using 4020 aluminium extrusion profiles and 10 mm rods, Igus bearings, GT2 belt for the motion. In…
I needed a might trap for my new coop and designed it as a single unit for easier installation. I printed this part with ABS, but PETG or even PLA will be probably be fine. Hole for perch: 8mm (approx. 5/16 inch) Screw for mounting:…
CorEssentials is an open source corexy 3D printer. Built Volume: 240 mm x 250 x mm x 250 mm Hotend: E3D V6 0.4mm (Bowden & direct available) Extruder: Bondtech BMG Built Plate: Magnetic Spring Steel with PEI or Pertinax Heated Bed: 230V,…
I really liked the design by brimstone 326, but didn't want to waste plastic for floor levels I wont ever use. So I removed the flloors and thinnend the walls a little bit. I also added a Version with 3 floors at once. Hope you like it.…
I didn't have the appropiate spacers - so I designed and printed them. Tehy are sized to be used with standard M4 hex nuts at the bottom. First insert all 22 nuts in the holes, then add the spacers. They are a tight fit and might need…
I was not really happy with the hotend- and part cooling fan setup in the Hypercube Evolution. I used the hotend-mount designed for the Original Prusa MK3, removed the stepper motor mount and attached it to the x-carriage. For this I…
I wanted to hang my Guardian Shield+ next to my Guardian sword. So I came up with a quick design for a wall mount. All parts where printed on my CoreBot 3D printer: https://www.instructables.com/id/CoreBot-CoreXY-3D-Printer/ Print…
Most files are the exact same files posted by Kallunke in his original release. The only changed parts are stand, exhaust_front and exhaust_aft. These were split into two pieces. The bottom piece prints without support, the top one needs…
I quickly designed this zip tie mount to route the cables in my Vulcanus V1. I mounted them with double sided tape. I am perfectly aware that it may be cheaper to just buy them ;) Print instructions Category: 3D Printer Accessories
I wasn't quiet satisfied with using M8 screws for the z-axis, so I altered the mount to accept an TR8 leadscrew. I also changed the design of the belt tensioner mounted to the x carriage. Print instructions Category: 3D Printer Extruders…
This is the belt-driven z-axis assembly of my CorEssentials project. This is just an abstract of the whole project for people who just want to use a belt driven z-axis in there project. In my built I used a 16T pulley on the Motor for…
I really liked the design of the Kossel carriage bei 3DPB. But it seems he lost his "source files". So I re-created the desing for my Kossel built using the Duet Smart effector and Haydn Huntleys Magnetic Rod-Ends (or at least the "balls"…
It took some time but just now I finalised and tested the BETA-Version of my CorEssentials CoreXY 3D printer (Beta as in 2nd Version / iteration - not as a "test"-version - maybe I should have thought about that implication early on). All…
This is a case I designed for the Fysetc PanelDue 5i. I directly mounted it to the front 2020 extrusion of my Voron V1.8 but I thought it was very versatile so I shared the design.
I wasn't really satisfied with the available E3D V6 Mounts for my CTC, so I created my own version. There are 2 Versions available - they are all the same, but different! I would hardyl recommend V003 for single or V007 for dual setup.…
I just designed a simple mount for a cable drag chain for my Vulcanus V1 (2016) an thought someone may like to use it as well. The part on the x-carriage (2016 Version!) is glued on to with acetone - the part on the back is mounted with 2…
I modded the great design by DaGov to accomodate for bowden fittings I had laying around (from my Voron-Projects) as well as improving printability. The only part I changed is the back extruder part. The remaining parts can be used from…
Strain relief for the tool head / x-carriage cables on the Ender 3 printer series.
I really like the Vulcanus V1 design by Vulcaman - you can find his instructable here: https://www.instructables.com/id/Vulcanus-V1-2016-Rework-MGN12-Linear-Slide-Update-/ But I had some problems when building a complete enclosure for the…
This is the Nano Tool I use in my CorEssentials 3D printer. You can find the most current files on the GITHUB-Page: https://github.com/MacNite/CorEssentials There are 3 different kinds of tools available: Nano Tool Bowden (Coldend: 1x…
This is a quick design I came up with to mount the LIS3DH from Adafruit to an 40mm axial fan. https://www.adafruit.com/product/2809 Just print it and mount it to your hotend cooling fan using 2-4 M3 screws. You can attach the…
I support the Dark Souls - The Board Game kickstarter kampagne and just got the copy of my game. My aim was to make a organizer for the cards and beeing able to close the box completly (OCD and so on). This part is not a remix of the…
I made this quick design to mount an SG90 servo with an endstop to use as a bed leveling probe on an E3D V6 fanduct. I also included the single files for mounting the servo, so you can glue / screw them onto your existing fanduct. Here is…
Here is a quick design I made for my Ultimaker Original+ with dual extruder to silence the printer a littel bit. You need to print four of each piece to support the printer frame. Print instructions Category: 3D Printer Parts
I made a quick design for the x-carriage for my Vulcanus V1. It should also fit every printer with an axis distance of 50 mm (Prusa / Mendel etc.). It's designed to use LM8UU bearings on 8mm rods. The carriage is designed to fit an E3D…
I made this quick mod of the Proteus Key Holder by Proteanman for my grand-father-in-law. I hope, it may help someone as well. Print instructions Category: Household Supplies
I edited the mount for the cable on the x-axis stepper motor. Befor I couldn't install this fan duct properly: http://www.thingiverse.com/thing:537918 The extruder-carrier (better: the fun duct) 'crashed' into the stepper-motor-housing…
This is a quick design I made to add two 120 or140 mm fans (one on each side) to my CTC's build chamber. Goal was to make a fan mount, which can be easily removed when you have to access the print bed from the side (i.e. to apply blue…
During really hot days I had some issues with my Raspberry PI Zero W overheating. So I added a 30mm fan to keep temperature of the Raspberry PI and the electronics down. I used one of the 24V fans that came with one of my E3D V6. Print…
This is a simple design I came up with to mount a Duet 1LC board on the print head. It replaces the original strain relief on the tool head while maintaining compatiblity with the original part cooling fan. | No | Qty | Name | Printable |…
I made this design on base of the fanduct by Elzariant. I just added a mount for the SG90 servo to use it for auto bed leveling. I also added a single version of the SG90 Mount, so you can glue / solvent weld the part to your existing…
I slightly modified the design by ocieward to make it more suitable for my use-case, the changes are: removing the holes to mount the enclosure to 3030 Extrusion adding holes to mount the enclosure flat onto a plate removing the mounting…
This is a fan duct I designed based of the Tusk Part cooling fan idea by SublimeLayers. I modified it an built a version strongly inspired by the one from cdoe. This duct is using a 40mm blower fan and 2 pieces of 4mm (OD) brass tubing.…
I really liked the design by p3t3rp4nd4 to show the tool numbers in the machine directly. But I wanted to print it with multiple colours. After all this is one of the features of the E3D ToolChanger. I hope you like these files. If you…
This is just a quick design I made for the rear I/O of the printer. It replaces one of the bottom corner brackets and can fit a power connector, USB pass, ON/OFF switch (17.5x12mm cutout) and a fuse holder (panel mount fuse holder for…
This is a modded version from the Lightweight Extruder conversion. I added a cable protection on the top part. The top part comes in two version: one with the thread for the PTFE-Tubes and one without. Sorry for the poor pictures. Print…
This is just a quick design I made for my Vulcanus V1. I wanted to use it with the E3D Titan Extruder and an E3D V6 hotend without replacing the x carriage. So I made a design for the Nema 17 mount and the bowden adapter for the E3D Titan…
This is a Dock for the SteamDeck I designed for using the following two USB-C-Hubs: https://de.ugreen.com/collections/usb-hubs/products/15214…
I just updated the back part of the LCD-enclosure for the Ultimaker clone by denisc - now you can access the SD-card slot on your LCD controller. Print instructions Category: 3D Printer Parts
This is the water cooling setup I use in my CorEssentials BETA for the E3D Chimera Aqua. Obviously this will fit most other printers. You can find out more about the machine on GITHUB: https://github.com/MacNite/CorEssentials To built…
I built an internal and manual fan controller for up to 5 standard 12V PC-Fans. It should fit many different printers, but I designed it for my Replicator-Clone. The Fan controller I used was the Aerocool F5XT:…
A quick design I made to mount a PanelDue to my E3D Toolchanger. This design is for the genuine PanelDue by Duet3D not the Fysetc clone. For assembly you need: 8x M3 Threaded Inserts 10x M3 x 8 2x M5 Nuts 2x M5 x 40 Zylinder Head Screws…
This is a quick design I made to mount my Duet Maestro to the Aluminium Extrusion (2020) of my Anycubic Kossel Linear Plus. The mount is designed to allow acces to the Ethernet port between the two lower 2020 extrusions. There are 3…
I built this really simple jig to make a modular gaming table / board for the games I play. The problem I found with modular terrain is, that the individual plates often move around when someohne pumps into the table or larger terrain…
This is a quick design i came up with because one of the brake line clamps of our Woom Go 1 broke. You need slightly longer screw to mount this version.
These are all currently available results.
