Counting matching models…
I needed a quick disconnect to be able to swap my dust collector from one mobile tool to another. I could not find what I needed on PrusaPrinters, but I found one on another site that unfortunately did not fit properly. I redid it to fit…
When I designed my 4-inch flex dust collector hose quick disconnect, I also designed a port for a tool that did not have one. I have included a SketchUp (SKP) file if you want to modify it.
The Precision Screwdriver Case by TimATX printed and fit together well, but my screwdrivers did not fit well. I printed it because my original case was cracked and would not stay closed. I redesigned the inserts, basing them on my set's…
I got tired of using a piece of wood to prevent the saw blade from turning while loosening and tightening the retaining nut. I didn't want to buy a Bench Dog Blade-Loc so I designed my own with FreeCAD. I printed it on my MK3S with a 0.4…
I could not get the original K2 Clip to print well and did not feel like I needed the additional slots of different sizes. I designed my clip without the unnecessary openings and additional slots. I also adjusted the slots to work better…
I wanted to use this in a plant pot but did not want the open look, so I added a 0.2mm layer to the open holes so that things would be white.
<<<RE_UPDATED>>>I needed a stemmed knob for a project with a longer stem than I had already, so I designed one for the length bolt I needed and decided to make it parametric so I could use the file for other size bolts. I used FreeCAD to…
I needed to be able SD storage devices but didn't want to limit myself to a fixed number of devices. I found this model by mbrami on Thingiverse and it allows for a different type of device to be used in each location, with the number of…
I downloaded a tool from here before I realized it was for units with flat sides for a wrench; mine are smooth-sided. So I designed my own. It is very quick and simple and does not require any supports. I printed it in PLA and it works…
I needed small wire management in my 3D printer enclosure ( https://www.thingiverse.com/thing:3319066 ) to add some lights. I would be using wires that are 1mm and 1.5mm in diameter. I could not find a design that would work for me, so I…
When our old treadmill turned off intermittently, I looked into the cause. The key presses a micro switch which could not be modified, but the key was loose in the slot so vibration would cause the switch to deenergize the treadmill. I…
After I printed the wall mount version of the MT-SYSTEM Holder: BOSCH Battery Holder 12V by MAKERTEAM, I designed one for all the Rigid 12V Batteries that I also have. It was designed from scratch in FreeCAD and I have included the…
The old commercial container I used developed a crack so I designed a replacement. Rather than the lid snapping on, I decided to make it screw on. A parametric FreeCAD file is provided so you can make the container to better fit your…
I designed this to mold our homemade “suet” for feeding the wild birds. It is printed in vase mode. We found that lining the mold with plastic wrap keeps it clean and reduces the mess when transferring it to and from the freezer where it…
I wanted to be able to see the nozzle while printing as I keep having problems with the filament not feeding. I could not find anything that fitted my needs so I designed mine to place the camera where I wanted it and was rigid. It was…
Since the PPS has no filled cup holder because one usually mixes the paint and then uses it. I use the system to give me a way to quickly switch between paints and cleaning solutions. I store the filled cups since they are airtight and I…
I had installed a mag switch on my 240V table saw, but it just had a button to stop the saw. I wanted a paddle similar to the mag switches I have on some of my other power tools. Could not find anything that met my needs, so designed my…
After I posted my earlier design, I did some testing and although it worked, I realized that there needed to be some support for the hex wrench to make it even easier to use. I made the tool thicker for vertical support and added some…
Although I rarely move my printer (it is in an enclosure), I find that the bed frequently requires re-tramming. I'm guessing that is because of the “frog” warping over time. For years I have tried to use a tool that I modified from the…
I wanted a heat insert press but did not have the aluminum extrusion that was called for, but I did have a similar extrusion, so I designed mine using that extrusion. Using SketchUp, I redesigned the printable parts. I have included the…
I designed and printed this in 2019, but it was a poor design, and I rarely required it. I printed it with PLA, not thinking that the temperature for dehydrating PETG is too hot an environment for PLA. After printing all the parts for the…
My printer enclosure has an enclosed filament area on top that can hold up to 8 filament spools. Since I don't always remember which filament I have in there and where they are, and it is not easy to see the spools as they are arranged in…
I needed a dispenser for 9-volt batteries, but could not find one I liked, so I designed my own that should be jam-free (unlike the AA and AAA dispensers I already have printed) and will hold 6 batteries. I designed it in FreeCAD which is…
After looking at all the magnet placement tools here, I decided to design my own that is very simple and easy to print quickly. They are just two small “sticks” with a magnet on one end. Instead of caps, I just let the two magnets stick…
I got tired of the stylus or the thumb drive falling on the floor when I was using the printer, so I designed this holder to attach behind the touchscreen so that they would be secure but accessible. I used FreeCAD, so that file is…
When I'm at my computer designing a model to fit something, I wear my computer glasses, but they make it difficult to read my vernier caliper without changing glasses. I use a Vision Aid Magnifier headband with LED lights to be able to…
I downloaded the two-screw version of the foot restrainer Volan posted here but felt that having two screws was overkill, so I went to Thingiverse to get the original one-screw version there. It works just fine but was not simple to…
The 2-part Hatchbox spool can be used as a Master Spool. It has two bolt heads that stick out on one side. The axle for spools that use (https://www.thingiverse.com/thing:2460873, Filament reel holder by mindfreeze) has large nuts that…
Changed the magnet sockets to use 10x2 mm magnets and added an indentation in the bottom of the magnet socket in case glue was needed. I removed a column of bit sockets (plus 1) and the original screwdriver socket to make room for the…
Our new deck rails (replace due to damage from hurricane Helene) are metal and not rectangular. The clamp for our new birdbath is designed to clamp to a rectangular wooden top rail and would not be stable on the rounded top of the new…
I liked K2-Kevin idea, but it did not fit my needs. I wanted to use screws instead of magnets so I can move the station around without worrying about modules falling off. I also had to redesign the modules to fit what I use. I did not…
My hand tends to cramp when trying to use those tiny screwdrivers that come with some things. A TPU cover with a larger diameter solved that issue. I have included the FreeCAD file in case your screwdriever size differs.
These are all currently available results.
