Counting matching models…
Update: 08/09/2023 Updated some slots for better fit, hip-to-neck slot is arrowed for correct orientation, and improved surface icons for orientation of "skull" parts. Also added are not boring instructions, but an exploded view showing…
This model is compatible with the lego system.
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
Ceci sont des rectangle qui s'emboitent ressemblant au lego. Il sont petit et facile a transporter pour pouvoir faire des construction partout.
This model is compatible with the lego system.
This model is compatible with the lego system.
I have printed all of these at .2 or .15 mm in PETG. Worked well in operation.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Skládací kolečko. Prvně připevnit dvě osy do jedné bočnice, nasadíme rolny a kolečko, poté zajistíme druhou boční stranou. Tisk bez podpěr, vrstva 0,2.
Inlet tiles for GraviTrax to catch falling balls. Two types of height - 20 and 25mm available. By adjusting the direction of the tiles I place on top, I can create a 20mm or 25mm drop and change the direction of movement as I wish. This…
Mattoncino LEGO Compatibile 2x1 - STL Questo file permette di stampare un mattoncino compatibile LEGO 2x1, ideale per costruzioni più estese e complesse. Grazie alla sua forma rettangolare, si integra perfettamente con altri mattoncini…
24/12/22 : I updated to ver. 2.1. In addition, now supports a wider range of heights. 24/12/23 : I added “6legs +30mm” ver. ----- This spacer allows you to stack genuine GraviTrax tiles on top and create higher structures. Please note…
A toy that uses 3D printing and recycling: 2 printed parts and a cork! Fits on almost every cork. Print it and recycle!
Another version of Servo Mount for Lego Train Switch. The others simple do not suit me well. All parts are printable, you will only need SG90 9g micro servo with a small screw (usually part of servo) and sure, the original lego switch…
This model is compatible with the lego system.
Just my design of a CV joint for LEGO, made for a friend, hope it can help you as well ;) The design is not optimal and there is room for improvement, but it works!
This is another random thing I made. A 4x2 Lego brick. It is recommended that you print it with no support (orientated so that the studs are facing upwards), but if you have trouble printing without support, you can print it with support.…
Support My Work If you appreciate my designs and would like to support my work, or if you're interested in a commercial license to sell my models, here are some options available: PayPal Subscription Plan: Subscribe Here Thangs Site: Join…
Bei abgebrochenem Kugelkopf die Bruchstelle mit einem Messer säubern und das ersatzteil aufstecken.
This is the full documentation for building a tractor with the PolyBriX construction kit. This project only provides the STLs with all the required parts and the detailed assembly instructions. The individual parts can be downloaded form…
I started with a 1x4 piece obtained from machineblocks.com, then I edited it to add a space so I could stick the labels that come in the boxes or bags of filament. This way you get a sample of the filament, with its brand, color name,…
This model is compatible with the lego system.
This model is compatible with the lego system.
When I first got into this hobby of Lego trains and 3D printing I found a lack of custom parts available for download. All the builders seem to use 3D printed drive train parts and they are available for purchase from various websites but…
These wheels are modeled after the South Australia Railways T class narrow gauge locomotive. They are ugly but necessary. Standard 30.25mm wheels Not just copies of injection molded parts, care has been taken to ensure 3D printed parts…
NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments
Introduction Video: https://youtu.be/TQ_tjPChxrg The EXPANSION PACK 2 adds 16 new components to the Pocket Outpost kit. With the new components you're able to build crazy mechs, tanks, spacecrafts and more. Discover entirely new ways to…
This is Brick Tree it is inspired by popular brick company tree. Made this on kit card to have more fun. Give it away as a gift or put it together with kids or if you feel very adventurous, do it by your self, there is no manual included…
These buffer stops will keep your wooden trains from running off the ends of the rails. All pieces print without supports. Feel free to message me if you need a custom size, and click here to check out my other train designs. Update 17…
Here are four straight rails that can be used with Gravitrax, each spanning 1 to 4 tiles. The length is approximately equivalent to that of the original Gravitrax rails. Note : I'll be uploading separately some rails that are 1 to 3 mm…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
Create custom structures with this tube building system. Designed entirely from 3D printed parts, the system features a range of tubes, T bolts, brackets, and pins that connect to form strong and versatile frameworks. The tubes are…
This is a warp pipe made for Connetix magnetic tiles with an open hole for figurines to go through. There is an option for 1x1 squares and 2x2 squares for larger figurines. The magnets I used are pictured from Bunnings Australia but I…
There are two tiles, 1x1 and 2x2 compatible with Connetix tiles. Of course it's way better and cheaper to go buy the actual tiles than print basic squares but I have uploaded the bases I used to make my Mario Warp Pipe for figurines in…
This universal connector, to its special design, fits all popular wooden railway tracks. Compatibility: IKEA Lillabo BigJigs LIDL train BRIO According to the license, you can also use these files commercially, but according to the…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
A connector to make rhombic shapes. Pictured is a 2x2 rhombic dodecahedron.
This is my first printable; Meet Bald Emmet (he says please add hair when you print me out)
1:20 - around stables for animals around 10-14cm in height. Actual size 300x220x160 mm for walls, and 330x260 mm for roof. All parts can be done without supports. Major parts done on Prusa XL 0.6 nozzle 0.4 layer, and used layer modifier…
this is a pirate sword holder to put on the wall or the side of your desk. fits by 2 screws
Base plate for Hubelino/duplo ball track. Printed from PLA with perimeter 3 and layer height 0.2mm. Plate size 159x159mm
For multicolor users, print this Fenix born from blue fire. If you want support me https://nemanjajovanovic.gumroad.com/coffee
This model is compatible with the lego system.
This model is compatible with the lego system.
Universal wooden train connector that should fit Brio, Ikea Lillabo and printed train tracks. I replaced the original Ikea connectors by these (tight fit). Works well so far with different other brands and printed train parts.
This model is compatible with the lego system.
Kept the back open as I can only imagine the rage kids will get when the car doesn't come out. So this model was made for my under 3 years old son. Who loves to build playtive car tracks. Used the the base to fit for it. No supports nor…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
