Counting matching models…
Upgrade your garage wall button with this mechanical switch conversion. Instead of a cheap plastic doorbell-style button, this uses standard Cherry MX-compatible switches to trigger your garage door opener. Mechanism : This is a wired…
Small Vented Funnel If you dont own a 3D Printer I have them for sale on our Etsy https://www.ebay.com/itm/196549856815
I recommend printing in PLA+ or PETG. You will need just a little flex to put the hook into place on a pole. This is by design to ensure a good no-slip grip. I printed in matte PLA which did work, but it cracked slight due to the stress.…
Let me introduce you to my modular parkside pbspa 12 cordless screwdriver workstation. Any part can be printed separately and then joined together. There is no need any support with printing.
The first iteration is a single insert for a 3" magnetic tray. The one in this set . In addition to being a great TPU stress test, the idea here is that it's way easier to pick up all the parts in the tray at once by just lifting the TPU…
I set the print height at 0.20mm for three layers of TPU. Then, stuck in place with thin double-sided tape. The idea really works with any filament, but I like TPU in this application for the cushion effect.
A cleat for Ryobi's 18V One+ Leaf Blower (R18XBLW20), that connects to the Ryobi Link system. Also works for P21012VNM. Prints with no supports. Recommended settings: 0.20mm, Quality, PLA, No supports, Infil 15%.
Like the overall design. Only change i had to do was the forstner holder.
I've been using good old nails to organize torque wrenches on my barn's wall, but when I got this torque screwdriver things started to get fancier.
I downloaded some bracket model long time ago and used it as a source for this one, but I can't find the original link. If you see that it's based on your creation – please let me know, I'll add the link. One screw seems to be enough to…
A friend had a Dewalt job site radio that was missing the latch for the battery cover panel on the back. This one functions the same as the original. It was printed in PLA+ (which is supposed to be more durable than regular PLA, time will…
Latch for the console in a 2017 Honda Fit to design a replacement. It might work with other years also. Seems like a broken latch is a common problem.
Printed with PLA, 2 perimeters and 15% infill. There is a hole in the bottom of the bits pockets so some other stuff fits better. The electrical screwdriver is a Chinese one (looks very similar to Amazons own brand)…
Funnel with threaded sleeve for jug Made to fit jugs with 40mm (inner) to 44mm (outer) threads 4mm thread pitch Printing Print top down with brim some brim as the cantact area is low. No supports should be necessary. Example funnel…
The 30" Harbor Freight 1-drawer service cart has 4" swivel casters on all four wheels. This may sound like a great idea, in practice, having 4 swiveling casters makes it difficult to move the cart in a straight line across a driveway or…
Mount an IR interruptor sensor at car bumper height. The sensor will turn on a lamp when IR beam blocked. Used for backing into the garage so the bumper will clear the garage door. Back the car in until the lamp turns off. The 3D part…
Just added a positive bump to lock the socket better, this will hold best when on the rail.
I lost bag of yeti wrench holder. I design new holder for YETI 26911282 Combination wrench set (14 pcs/set; 8-24mm) Should print with PETG without support
This piece adapts a harbor freight storehouse bin to a Vevor 14" ball bearing drawer slide to make a Sortimo-esque rack.
Da ich den Drehknopf von meinem Hochdruckreiniger verloren habe, zeichnete ich einen, welcher von der Rückseite angeschraubt wird.
Tidy up the air hose a bit. Model with an opening on the top.
I was looking for a project that would satisfy me, but I couldn't find it. Inspired by what I found, I created something
I broke the handle on my MK Krøger H40 caulking gun (excellent tool, highly recommended!). This is a direct replacement , as I couldn't find a spare part available. Printing Orientation flat, with supports for the holes. 0.6mm nozzle and…
Revisions Revisions Description v1 - v3 Visual and functional improvements v4 Improved chamfers and printability improvements, added bevel to lower edge to allow low angle print bed scraping to prevent blade biting into bed coating. v6…
Silicone/Caulk Threaded Nozzle Cap for unthreaded nozzles
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…
Bottle Holder for Garage Chemicals – Simple and Practical Organizer Bring order to your garage or workshop with a simple yet functional holder designed for hanging bottles of chemicals. The holder consists of three mounting elements that…
this part plugs in the height adjustment handheel to prevent it from rotating and thus prevent unwanted sawblade decrease
My Husky Toolbox drawer either came off when I moved, or they were never on there to begin with. This was my first ever 3D Print and Modeling. I literally have zero experience and I am pretty happy with how they came out. When installing,…
I mounted mine to the side of my garage cabinet, and I only had 1 hole to use! Remixed from model from User named Bukken. 10mm through hole, and can be reached through the hex pattern. I printed white to match my garage cabinet too… :-) I…
I lost the knob that secures my telescope to the tripod so I sketched up this real quick to substitute it. It's really simple but functional.
Cerchi un tocco di modernità per i tuoi mobili? La nostra maniglia minimalista, stampata in 3D, è la soluzione perfetta! Progettata per unire estetica e praticità, questa maniglia si distingue per le sue linee pulite e il design…
Easily store your EGO batteries out of the way and off the charger while not in use. For any modifications, here's a link to make a copy of my 3D geometry in Onshape If this helped you out, tips are welcome on PayPal or Venmo If you…
Voici un modèle de protection pour boule de remorquage 50mm imprimé en TPU avec 3 clips de maintient intégré
Pins made from a nail expanded by a pen spring, which facilitates installation in the target location.
This is a guard that you put at the end of this saw
Over the years both of the plastic screws on my Sector consumer unit (UK) have been badly chewed up so decided to make some new ones. Print these in PLA to test but find print was in CF. Both worked just fine though. STEP file uploaded so…
A tiny latch that snap fits on the lip of the bin with a 3x6 mm magnet (fiction fit) that holds on to the lid just enough to keep the lid from accidentally sliding off. Its loose by design but you can glue it in with a tiny bit of CA glue…
Tento model Vám usnadní přichycení kabelu bez použití šroubu jen s oboustrannou páskou a stahovací páskou.
Heavy-Duty mount for the Yellow Jacket 3 outlet 12 gauge “contractor” extension cord. May fit other similar designs. It accommodates #8 wood screws, including cabinet/washer head screws. Printed in PETG. Model is designed to print with…
I designed a container to hold 4 ½" grinder discs of all types. The cover is knurled to provide a better grip for easy opening. I recommend printing it in PETG or another heat-resistant plastic for durability.
Introducing nut for removable westfalia tow hitch. I was forced to make one for myself since the original breaked when I was trying to remove it when restoring. I printed mine from ASA and works great. Designed to work with 8mm hex. Hope…
So, it doesn't seem that long ago, but after upgrading my main thermostat to a Ecobee 4 I was the lucky recipient of a Ecobee premium stat… So naturally the 4 replaced the 3, and needed the same kind of wall spacer surface mount. After…
Padlock protection from the environment, a very simple and reliable way to protect against sun, rain, snow and prevent rust, fading and freezing of the lock. Such a protected lock will last a long time and reliably because the grease will…
I lost the original screws for the case and didn't want to carry an exposed PCB, so I designed a 3D printable case. You do need to remove the plastic connector for it to fit (not pictured - removed & binned) (or you can modify the CAD…
This is a simple design of a bag hanger for square bars with a fixative clip so it stays in place. Three different design attached but feel free to remix it. I made it easily modifiable in onshape ( link ) so you can customize it for your…
Tight wall-mount for various 75mm piping, for example: - plastic drain piping - heat recovery ventilation flexible piping First insert the M3 nuts into the base (use a pliers to snap in), and attach the base to the wall with two wall…
This model is useful as a screwdriver (and not only the screwdriver) holder. It's fully extensible by adding the mounting model per your needs. The angle strip is made from wood. The mine is bought from the Bauhaus:…
paper towel holder prints flat on bed. allows adjustable tension on roll by decreasing the space between the arms. build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile…
great parts bins to keep your garage organized build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile for more modumount cart system models…
screws for attaching magnetic strip are included with the magnets build of materials: Rectangular Countersunk Magnets Strip https://amzn.to/4iVUcDB M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM…
works with most 8in parts organizers there is a larger modal on my page as well build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile for more modumount cart system…
this is designed to fit plano 3600 series tackle boxes, a large format 300mm^3 printer is needed for this due to the size build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my…
this is meant to be mounted on the side of the rail system to save space build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile for more modumount cart system models…
this is meant to be mounted on the side of the rail system to save space note unlike most modumount parts this requires a non flanged m5 button head build of materials: M5 x 8mm Button Heads https://amzn.to/4iYzl2C M5 T Nuts…
this is meant to be mounted on the side of the rail system to save space build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile for more modumount cart system models…
this is meant to be mounted on the side of the rail system to save space note unlike most modumount parts this requires a non flanged m5 button head build of materials: M5 x 8mm Button Heads https://amzn.to/4iYzl2C M5 T Nuts…
this is meant to be mounted on the side of the rail system to save space build of materials: M5 x 10mm Flanged Button Heads https://amzn.to/4bSx4DP M5 T Nuts https://amzn.to/4iE1UCM see my profile for more modumount cart system models…
this wheel is an exaggerated fit on the ford mustang shelby you only need an iron rod
This is replacement model of gear for robot vacuum cleaner Uwant U200. Gear was printed with 4 perimeters and 50% infil Material used was PLA with a lot of PTFE grease :).
Filament Shelf Bracket It's a filament shelf bracket. -50% gyroid infil -0.2 mm layer -PLA or PETG -Max weight 5-7kg Additional parts: -22mm Ø pipe (metal or plastic) -Screw with conic head
A small holder for hanging a drill on a Honeycomb storage wall Requires no support, and no extra hardware Includes 2 different files. One for a normal Honeycomb storage wall, and one for a Honeycomb storage wall mounted 90 degrees…
sleeve to enclose the DKS remote and a simple clip to clip it to a sunscreen or other convenient location. solidworks file included for future improvement. print with PC or ABS because the inside of a car gets real hot. pla gonna melt.
Designed for Magents to be glued into place. Required Components 12x3 Magent x 2
These are printable replacement gaskets for gas can spouts. There are two different versions. The first version is with the spring-loaded spout that comes with most gas cans. The second version is with a flexible replacement spout (like…
Socket orgainzation system for Sockets. Comes with 5mm spacers designed for wider 3/8 sockets. Comes with 7.5mm spacers designed for wider 1/2 sockets. Recommend gluing magents to base. Required Components : 12x3 Magnets
Airpump handle broke years ago so I designed this one. The original screws just barely push by but it works for me. 0.25 layer height, 4 perimeters, printed in petg.
Summary Continued: This part goes on the end of a car rack fitted for the top of a GMC that my dad asked me to replace because the original ones fell off. These ones are meant to stay in much more securely and not fall off even at high…
A fast and easy to print wall mount for your Surron charger. Don't forget to activate Supports: Everywhere If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than…
This bracket was custom-designed to securely and discreetly install the Mili Mitag Go Bluetooth tracker on the Royal Enfield Meteor 350. It allows you to conceal the tracking device safely behind the left side panel. The bracket mounts to…
100mm exhaust vent being used as part of a 3d exhaust system. I needed a version that fit into a ½ inch (12.7mm) board. I then decided I wanted a tighter hexagon grille. STL file provided in case you want to tweak this further. On the…
SKÅDIS Shelves – Customizable Modular System These 3D printed shelves are designed to fit perfectly on the IKEA SKÅDIS pegboard system. Ideal for organizing your workspace, storing tools, or displaying small items. Features: Clean,…
This is a shelf I made for myself to set my Ego Charger on to free up space on my toolbox. I had multiple people ask about it and I didn't save it so I recreated it in a few different variations to save time and material.
I modified the pegs to fit a standard pegboard (US). I also strengthened the part and lowered the top corner.
Manico per lima con inserto a sezione rettangolare svasata nei due piani ortogonali. Lunghezza del manico 10.5 cm, inserto sez. rettangolare 5x8 mm svasato quasi a punta lungo 5 cm. La lima si introduce e si regge con la semplice…
I needed a fully adjustable hook for various applications. I will include the Onshape file link with editable variables so you can totally customize this to your needs.…
3D model description 📢 For commercial use, join our Patreon at: 👉 www.patreon.com/PrintForgeAU ONLY $10 per month! Keep your Milwaukee M12 batteries and charger neatly organized, secure, and easily trackable with this custom-designed…
3D model description 📢 For commercial use, join our Patreon at: 👉 www.patreon.com/PrintForgeAU ONLY $10 per month! This custom 3D printable insert is designed for the Milwaukee Packout M12 toolbox, providing a precise fit for your M12…
I made this to hold the included stones and to hold the allen wrench. I printed with PET-CF17, with default 15% infill, etc. I made it so it would work if you had screws mouting the platform or no screws. I only use this occasionally and…
Replaces the heat adjustment knob on a Dyna Glo kerosene heater. I recommend printing with 100% infill around the center hole.
