Search results: 100x100

Sort order

231 models

P
PrintablesCooliPi

CooliPi 4B VESA 100x100mm

A snap-on VESA 100x100mm holder for the CooliPi 4B CASE. A CooliPi 4B CASE holder with cable management for the Raspberry Pi 4 model B computer. See more info at www.coolipi.com Shop at www.sensoreq.com Print instructions This is a VESA…

Downloads
74
Likes
4
Rating
0
P
PrintablesHussain

Advanced Filtration System Bracket for Fette Filter 100x100x30mm

Prusa Advanced Filtration System Bracket remixed to fit Fette Filter 100x100x30mm ( 4" x 4" x 1.2") Fette Filter - Air Purifier True HEPA Replacement Filter Compatible with OSIMO A2 Air Purifier with High-Efficiency Activated Carbon…

Downloads
34
Likes
10
Rating
5
P
PrintablesRyan Cosby

GMKtec M6 Ultra Vesa Mount (100x100 Snap-Fit)

I designed this minimalist VESA mount because I couldn't find an existing option that felt secure without requiring the removal of the rubber feet. This bracket features a high-clearance design that snaps directly onto the unit for a…

Downloads
20
Likes
1
Rating
0
P
PrintablesBoogie

First layer test 100x100 mm square

First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square

Downloads
13,201
Likes
207
Rating
4.89
P
PrintablesPigeonGiraffe

100x100x100 Calibration

I needed a new calibration print to dial in my stepper motor to achieve great dimensional accuracy at a larger scale than just a simple 20x20x20 cube. Was looking and found this from Collect3D on thingiverse. Remixed it to have larger…

Downloads
2,007
Likes
106
Rating
5
P
PrintablesMorris Lazootin

VESA 100x100 Low Profile French Cleat Wall Mount

Are you feeling overwhelmed by your monitor taking up too much space on your desk? It's time to take a stand and reclaim your workspace with this French cleat, low profile monitor wall mount. This mount is designed to be both strong and…

Downloads
1,581
Likes
247
Rating
5
P
PrintablesUhrensohn

IKEA Skadis Vesa Mount (100x100)

A simple monitor holder for Ikea Skadis. Suitable for Vesa 100x100. Separate the model into two parts in the slicer and turn the two parts to the side of the hooks. so no support structure is necessary. I recommend at least PETG! Eine…

Downloads
1,163
Likes
137
Rating
4.8
P
PrintablesReDevil75
Downloads
1,056
Likes
7
Rating
5
P
Printablesbennie

VESA 75x75 or 100x100 low profile wall mount

Simple low profile wall mount for 100x100mm and 75x75mm VESA monitors. I used it to mount my 34" ultrawide and it worked like a charm. Because of the low profile, 4 screws and angled dovetail it's very easy to install and very strong. Use…

Downloads
1,011
Likes
104
Rating
5
P
PrintablesSteveK318

100x100x.2 1st layer check

Just a 100mm x 100mm x .2mm for 1st layer check

Downloads
1,010
Likes
15
Rating
0
P
PrintablesBmcguire

2024 M4 Mac Mini Vesa Mount 100x100mm

This mount was designed based on the model by @DaveWoodX . If the actual computer's dimensions differ upon arrival, I will update the design accordingly. Update: Added v1.5 to add strength to the fingers that hold the mini into the mount.…

Downloads
727
Likes
50
Rating
5
P
Printablesniewesoly

Arzopa Z1FC VESA 100x100 Mount Adapter

Transform your ultra-portable Arzopa Z1FC 16.1" 144Hz gaming monitor into a permanent workstation setup! This custom 3D-printed adapter adds standard VESA 100x100mm compatibility , letting you mount it on walls, arms, or stands for…

Downloads
727
Likes
57
Rating
0
P
Printablesrorys3D

Tiltable VESA mount - 100x100

A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office, workshop or public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…

Downloads
712
Likes
147
Rating
5
P
Printablesder_kellermann

100x100mm Vesamount for Monitors

I designed this simple monitor mount to use for a 24 inch 100x100mm compatible monitor. Material needed: This mount needs 27-28mm wooden roundstock found in hardware stores. Cut to length to determine the height of the monitor. Keep in…

Downloads
636
Likes
100
Rating
5
P
PrintablesJpmurphy5

Customized Chain Mail 12x100x100

Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…

Downloads
541
Likes
23
Rating
5
P
PrintablesMario Alvarez

HSW Large honeycomb basket 100x100x63mm

honeycomb basket for heavy items

Downloads
519
Likes
93
Rating
4.67
P
PrintablesKhoomn

100x100x100 Dimensional Calibration

Print this out, measure with calipers after it has cooled down to room temp, adjust esteps based on that. X and Y corners are rounded so if you don't have pressure advance on, it won't mess up your measurements

Downloads
320
Likes
17
Rating
0
P
PrintablesHugo

Vesa flush wall mount plate 100x100mm

Simple remix of the original Vesa flat mount but with a 100x100 spacing Print instructions Print flat on whichever side, recommend at least 3 perimeters.

Downloads
294
Likes
26
Rating
5
P
PrintablesBart

Vesa plate 100x100 for Multifunction Arm Mounting

Changelog: 2023.04.07: Fixed scaling problem.

Downloads
280
Likes
61
Rating
0
P
Printablesarmer_geddon

VESA 100x100 Adapter MSI Optix MAG341CQ

Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…

Downloads
271
Likes
10
Rating
0
P
PrintablesGrumpyTanker

100x100 VESA Mounting Plate for Multifunction Arm

Modified the original by cutting the model and moving it so the mounting holes are at 100x100mm spacing. Then extruded the cut sections back so that the original mount still works the same as it used to.

Downloads
268
Likes
41
Rating
5
P
PrintablesEduard3D

VESA 100x100 monitor stand

This is my monitor stand, which I built for an old monitor of mine, because I didnt just wanted to buy one from Amazon . The finished thing should weigh around 500g.. I think (I forgot to weigh it before I mounted the monitor on and now…

Downloads
261
Likes
41
Rating
4.5
P
Printablesmcko

100x100x90 square flower pot

2 versions: HOLES/NO HOLES

Downloads
244
Likes
19
Rating
5
P
PrintablesLeon.Reijnders

ESP32 Case, Box 100x100x30mm for ESP32 and RelaisBoard

created this Box for a Garage door opener using an ESP D1 Mini Controller and a Relayboard. Stepfile is included to make your own Version. Layer Height: 0,2mm Infill: 30% Material: PLA M3 Heat inserts used for mounting the Boards and the…

Downloads
239
Likes
45
Rating
0
P
Printablesprae

M4 Mac Mini Holder with 100x100m VESA Tab

Remix of Alvin's remix to add 100x100mm VESA mounting tabs.

Downloads
237
Likes
34
Rating
5
P
PrintablesNiklas Voigt

Lenovo L24i-10 Vesa Mount Adapter 100x100

The purchasable version is overpriced and also from 3D printing. So I have drawn my better variant. Just use the sheet metal and the original screws, they fit perfectly! Printed from PETG. Category: Office

Downloads
237
Likes
10
Rating
5
P
PrintablesJoKeR_1337

Filament leftovers trash / recycle bin (approx. 100x100x200mm)

Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)

Downloads
223
Likes
21
Rating
5
P
PrintablesHarryFu

Ikea Skadis VESA Adapter (100x100) thin version

I found the VESA adapter from Uhrensohn brilliant, but for my monitor, which I really wanted to attach near the wall, the adapter is pretty thick. Also I noticed that the original cutout for the panhead screw was not deep enogh to fit my…

Downloads
223
Likes
26
Rating
4.83
P
Printablesloopj

Slatwall Flush VESA Mount 100x100

VESA mount for 3" T-slot slatwall systems, such as NewAge slatwall system, or Gladiator slatwall system. Print standing upright/vertically with no supports using PETG. Attach your display to the VESA mount with 4 M4 screws, then hang the…

Downloads
216
Likes
26
Rating
0
P
Printables3d Master

100x100 Test Cube

This is a 100x100x100mm cube. This allows great accuracy when printing future models. This allows you to see if you printer is not quite meeting the exact points needed when printing. If these points aren't met models can be too big or…

Downloads
214
Likes
4
Rating
5
P
PrintablesDsgnPA

Chainmail - 100x100mm - for SLS prints

This is one of the models that I designed and printed out on our SLS Machine for fun. It is not optimized for FDM. I might eventually do it in the future. It is 100 x 100 mm with interlinked single elements. I have attached some images of…

Downloads
213
Likes
26
Rating
3
P
PrintablesForny

Vesa 100x100 monitor mount

If you print one of these, I would be glad if you post the print here :D.

Downloads
212
Likes
29
Rating
5
P
Printablesstuchlej

Ikea Skadis 100x100 VESA Mount

I have used PETG to print this model. I have purchased set of M4 16mm screws. Suggested print settings (see .3mf file) for 0.6mm nozzle: - Nozzle: 0.6 mm - Perimeters: 8 - Infill: 100% - Temperature: increase by 10°C over the default…

Downloads
211
Likes
24
Rating
0
P
PrintablesThomas

Corner bracket / Winkel 100x100x50 classic design

100x100x50 mm / 4mm dick, gedruckt mit 0,2mm Schichthöhe / 4 Wänden / 25% Füllung

Downloads
208
Likes
73
Rating
5
P
Printablesjbaekey

VESA 100x100 Mount for Vertically Oriented 3/4 Iron Pipe

See my newer model for a remix of this in a complete project: https://www.printables.com/model/400720-diy-monitor-pipe-clamp-mount This is a mount made for a Dell monitor but should work with any VESA 100x100 monitor. It will attach it to…

Downloads
203
Likes
36
Rating
5
P
PrintablesChrisIsTheStig

200x150 to 100x100, 75x75 VESA TV Mount Adapter

This is an adapter to mount a TV with a 200mmx150mm VESA hole pattern to a mount with 100mmx100mm or 75mmx75mm pattern. I bought a small 32" TV for my office, and also got a cheap wall mount that said it supported 32" TVs, however the…

Downloads
196
Likes
25
Rating
0
P
PrintablesJpmurphy5

Customized Chain Mail 10x100x100

Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 10 platform_width = 100…

Downloads
189
Likes
8
Rating
4
P
Printablesmajek

VESA 100x100 adapter for 200x100 monitor mount

VESA 100x100 adapter for Iiyama 200x100 (6 screws). Print without supports, there are thin layers above hexagonal head to puncture/drill after printing. Part list: about 120g of PET-G 6x M4x20 6x M4 washer 4x M5x20-30 screw with hexagonal…

Downloads
188
Likes
28
Rating
4.5
P
PrintablesObico

Square - 100x100x0.2mm

A square pattern for testing a first layer bed scan

Downloads
169
Likes
2
Rating
5
P
Printablesfroetz

Tilted monitor wall mount rotation - vesa 100x100

English: I found this thing: https://www.thingiverse.com/thing:1962611 to mount my 24"-screen to the wall. since the case of my screen seams to be not the stiffest one, and the parts had a little bit loose fit, the screen leaned forward…

Downloads
164
Likes
25
Rating
5
P
PrintablesFlo Heman

VESA Adapter 100x100 Samsung LS24D-Series

Adapter to mount a Samsung LS24D-Series Monitor on a standard VESA 100x100 mount. Print the Base, the Pin and the Shell separately and use a threaded insert in the base. Fit the Shell around the Pin and screw the Pin onto the base. Some…

Downloads
154
Likes
9
Rating
0
P
PrintablesSp1y3rS

VESA mount 75x75 100x100 mini PC

A simple bracket to hang a mini pc on a tv stand

Downloads
148
Likes
25
Rating
0
P
PrintablesZinc

Stackable square storage box 100x100x70mm (Vase mode)

Recommended to print in Vase mode with wall thickness of 0.8mm. Bottom layers more than 2. If you print it with vase mode, the box can withstand quite a beating, and also it makes it smoother and less break prone when separating boxes.…

Downloads
148
Likes
45
Rating
5
P
Printablesonus

Vesa Wall Mount - 01 (100x100)

just a simple wall mount for an hp mini PC. NEED: 4x - M4x10mm buttonheads 2x - 2.5" drywall screws You'll need four M4x10mm button head machine screws to attach it to the back of your PC. I have included some screw caps for the heads, so…

Downloads
143
Likes
21
Rating
5
P

Vesa 100x100 to 200x200

This model is an adapter from Vesa 100x100 to 200x200 , i used it to mount a tv on a Vesa 100. This model uses additional parts: 4x M4 Screws. 4x M4 threaded inserts (6mm diameter, 6mm length). I don't raccomend using this adapter for tvs…

Downloads
133
Likes
3
Rating
0
P
PrintablesPFu

Dell S3222HG 100x100 VESA Mount Spacer 24mmH

A 24mm high spacer to fit into the Dell S3222HG monitor's recessed VESA mount so that larger VESA plates/rails can be used. Its overall dimensions are 121 x 121 x 24mm. Make sure to use the appropriate length screws to prevent damaging…

Downloads
130
Likes
5
Rating
5
P
PrintablesDanuvius

Silica gel box 100x100mm (320g & 160g version)

I didn't find a simple 100x100mm silica box, that i can print on my Voron 0.2, so i decided to do a quick simple one with heat set inserts an a screwed lid. The big box fits around 320g of Silica beads (See pictures). The small box fits…

Downloads
127
Likes
13
Rating
5
P
Printablesmcko

100x100 square saucer

100x100 square saucer Square flower pot: https://www.printables.com/pl/model/165712-100x100x90-square-flower-pot

Downloads
126
Likes
9
Rating
0
P
PrintablesBranoHaniačik
Downloads
124
Likes
5
Rating
5
P
PrintablesCed

Vesa 100x100

Hello, A fixed mount for a VESA 100 x 100 screen. Installed on my 27" monitor without any issues. Infill > 40% for secure fitting. good prints

Downloads
123
Likes
15
Rating
5
P
PrintablesPerendinate

Msi Optix G24C Vesa Adapter 100x100

Was sick of the non-adjustable stand so I bought a VESA mount for my monitor but adapters were around $30 on amazon so decided to make my own. The VESA adapter is designed for the MSI optic G24C however may work for other monitors.…

Downloads
122
Likes
8
Rating
0
P
PrintablesJayfeather

Small Waffle (100x100x15mm)

A 50 gram 10x10x1.5 cm waffle with 36 holes. Takes 3 hours to print on ender 3. Print settings no supports

Downloads
121
Likes
10
Rating
4.67
P
PrintablesWaebis-Lab

Vesa anywhere mount 100x100

Pretty stable, I hope at least. Use one M6 x 50mm allen screw to attach. Cross is attached with M4 x 10mm

Downloads
120
Likes
29
Rating
5
P
PrintablesMrStolarsky

VESA 100x100 Accessory Rail for Your Monitor with 1/4" Threaded Inserts and GoPro Mount

Now available on Etsy complete with free shipping and embedded threaded inserts. This accessory rail mounts to the back of your VESA-compatible monitor or arm. It has place for two ¼" threaded inserts and one GoPro accessory mount. I used…

Downloads
119
Likes
57
Rating
0
P
Printablesedmar

Adapter - Dell Monitor Stand (FFT-FZ) to VESA 100x100

I had a Dell P2217H monitor that broke, so I bought a new monitor, the SE2222H from Dell as well. The stand of the old monitor was much superior to the new one, so I decided to swap them, and to my surprise, I realized they were not…

Downloads
118
Likes
16
Rating
5
P
PrintablesMaubror

Hp Elitedesk 705 G1 Wall Mount (VESA100x100)

I needed a model to hang my Elitedesk on the wall but didn't want to attach it permanently since i'm going to mount it in a tight closet. This way i can just slide it out if i ever need to plug something in. The standoffs need to be cut…

Downloads
106
Likes
9
Rating
0
P
PrintablesRok Potočnik

VESA 100x100 and 75x75 Low Profile French Cleat Wall Mount

For print use settings and tips from original model description. Other files are also avalible here. https://www.printables.com/en/model/447758-vesa-100x100-low-profile-french-cleat-wall-mount

Downloads
105
Likes
12
Rating
5
P
PrintablesParkinSide

Parkside Box 100x100x30

Questa scatola porta minuterie, ispirata al rinomato marchio Parkside, è stata realizzata con cura mediante stampa 3D, garantendo un design robusto e funzionale. Ideale per organizzare viti, bulloni, chiodi e piccoli attrezzi, la scatola…

Downloads
104
Likes
9
Rating
0
P
PrintablesSøren Hejnfelt

Drawer divider V2 - 100x100x5mm single part - scalable to any dimension

I was tired of always having to remix drawer divider/separator models so I decided to design a simple scalable divider that prints easy and fits together perfectly and can scale to whatever dimension you like within the slicer. The result…

Downloads
103
Likes
17
Rating
0

binding template 100x100mm & 30x100mm

To make covers for diaries, notebooks, mini keychains. Templates to avoid having to measure more and improve production times. 3D printing settings Layer height:0.2mm Printing speed: 40mm/s Filling:5% Wall lines:3 Supports: not required

Downloads
103
Likes
16
Rating
0
P
Printablesluckiesdavid

Lüftungsgitter 100x100

Lüftungsgitter 100x100

Downloads
102
Likes
8
Rating
0
P
PrintablesJames S

trak racer 100x100 recessed vesa spacer

Adapter to allow multi-size VESA mounts to attach to 100x100 M4 VESA monitor Dell monitors(and others) have recessed VESA mounting holes, if you don't use spacers a large flat universal mounts will put pressure on the monitor case and…

Downloads
100
Likes
4
Rating
0

Vesa plate 100x100 for Multifunction Arm Mounting

Added arc holes for monitor adjustment

Downloads
94
Likes
18
Rating
0
P
Printablesvogon

100x100 vesa mount for monitors (imperial size ver.)

as I mentioned in the summary, I love everything about the original design except the dowel hole on the clamp + foot models is a slightly awkward size to fit a standard imperial-size dowel, so I added about 0.2mm to the radius of each of…

Downloads
90
Likes
17
Rating
0
P
PrintablesKirill_Maker

intel nuc 5 vesa 75x75 and vesa 100x100 mount

I've made simple intel nuc 5 vesa 75x75 and vesa 100x100 mount.

Downloads
88
Likes
7
Rating
0
P
Printablesmelnikod

XYZ Calibration Corner 100x100x100x10

Remix from https://www.thingiverse.com/thing:2813041 Side lengths are 100mm Thickness is 10x10x10mm To be printed in given orientation to align X and Y axis With recessed corners for better measuring of the perpendicularity

Downloads
85
Likes
7
Rating
5
P
PrintablesMoho Lalo

HP OMEN x25f and x35c VESA adapter mount 100x100mm

This is a 3D-printed adapter for the property VESA Mount for the HP OMEN x25f and x35c. The through holes are for M4x40mm bolts.

Downloads
84
Likes
2
Rating
0
P
PrintablesC B

E-step calibration (rotation distance) 100x100x50

E-step calibration 100x100x50 Calibration for x y z Axis 100x100x50 Printer : Flsun V400 layer height : 0,2 line width : 0,4 no support ; infill 20% ; print time ~ 1 h Sunlu PLA Silk Gold MakerWorld : https://makerworld.com/en/@sweb3791…

Downloads
81
Likes
10
Rating
5
P
PrintablesFREEZER

Kiste 100x100x100

Dies ist eine Kiste mit den Maßen 100mm x 100mm x 100mm

Downloads
79
Likes
0
Rating
0
P
PrintablesThorgraum

Calibration Print 100x100x100x10

with chamfers to counteract overextruded corners

Downloads
78
Likes
6
Rating
0
P
PrintablesSpecker

VESA 100x100 Double arm mount

VESA 100x100 mount for Multifunction Arm mounting system Monitor mount for VESA100x100 with double mount points. Plate has mount points for two Arm Mounts and two slots for additional hardware like Raspberry Pi / OrangePi compatible with…

Downloads
78
Likes
17
Rating
0
P
PrintablesMarc

VESA 100x100 rack mount

To install the fanless HP640 I chose a vertical position with spacers for best heat transfer. On this thin client I run a home assistant server very powerconsumption-effective. The spacers are split from the baseplate for better…

Downloads
77
Likes
6
Rating
0
P
Printablesbredlmax

Box mit Deckel 100x100mm Innenmaß abschließbar

Die Innenmaße betragen 100x100 mm. Das Loch für ein Bügelschloss hat einen Durchmesser von 7,1 mm.

Downloads
77
Likes
3
Rating
5
P
PrintablesRooks103

Monitor Mount (Vega 100x100) for Icon Toolbox Hutch

It mounts a monitor onto an Icon toolbox hutch wall. No rotation or anything fancy, but it works great. Designed after a french cleat, plus I thought it would be nice to have the mount separate as I may design some tool holders that the…

Downloads
72
Likes
8
Rating
0

VESA riser adapter 10mm for 100x100 to 75x75

Hello World! To use my old monitor arm i needed to adapt the vesa100 pattern of my monito to vesa75. I Also needed to lift the assambly by 10mm to get out of the way of the monitor backplate. I printed the model in PETG but PLA will do as…

Downloads
72
Likes
2
Rating
0
P
PrintablesRobby

SFX100 cable holder for Kinetik 100x100 profile

Cable holder for the Kinetic profile (10mm T-Nut) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Video Games

Downloads
71
Likes
9
Rating
0
P
PrintablesProwlerON

100x100x5mm Calibration rectangle

This is a very quick design. I needed something more accurate then 20x20x20 cubes for my X and Y. My print settings were 3 wall, 3 top, 3 bottom, at 20% infill. **I used brim as I was testing my ABS chamber.

Downloads
71
Likes
1
Rating
0
P
Printableschmeee

Monitor mount bracket - Vesa 100x100 to IKEA Skadis w/wo tilt

Two versions available: without tilt and with 5° tilt up. Use ISO 4762 M4x6mm or/and M4x10mm screws to mount.

Downloads
70
Likes
7
Rating
0
P
PrintablesSpb2005

Vesa adapter: 75x75 -> 100x100 Height adjust

Vesa adapter to change height and from 75x75 to 100x100 mm.

Downloads
68
Likes
4
Rating
5
P
PrintablesRoland Daum

Dell Monitor Adapter VESA 75x75 100x100

Adapter for the adjustable Dell Monitor Stand to mount a 3rd party VESA connectable monitor

Downloads
67
Likes
4
Rating
5
P
Printablesedcdadstuff

MSI G274F monitor mount for Amazon Basics Vesa Mount 75x75 to 100x100

A mount a MSI G274F monitor (27'' monitor in photo) The MSI monitor has a mounting space for a Vesa75 (75x75) and the supplied mount of the Amazonbasics monitor mount is 100x100. Created the mount, rather than buying one. The mount was…

Downloads
65
Likes
2
Rating
0
P
PrintablesSvabd

Catch-All Trays / Desk organizer 100x100x90 (height)

I also added remix of this size 50x50x68. It exists in the original version, but this model is without the plinth on the bottom.

Downloads
63
Likes
13
Rating
0
P
PrintablesKlemen V

Cover for VESA 100x100

Cover plate for Vesa 100x100

Downloads
61
Likes
4
Rating
0
P
Printablesjohnc

VESA 100x100 pole mount

The monitor with its original mount was too close. It's possible that the mount to the monitor's original stand would interfere. I simply flipped the monitor 180 degrees. I printed from PETG because of possible monitor heating. Two…

Downloads
58
Likes
8
Rating
0
P
Printablespankleks

Vesa 100x100 monitor wall mount

This is VESA 100x100 monitor wall mount. It has 2 joins allowing for horizontal movement. You will need 2 bolts M8x70 and M8x90. Tested with 26" monitor - should hold more - but use at your own risk. Use 15% gyroid infill. Designed in…

Downloads
58
Likes
3
Rating
0
P
PrintablesQiNuoDIY

Integrated Printer Tool Storage Box-100x100

A 3D printed toolbox is designed with the goal of achieving tool freedom, and it can be used directly after printing without assembly. The box joints are designed using snap-fit connections. It is recommended to print with a layer height…

Downloads
58
Likes
11
Rating
0
P
PrintablesAlvaro Marquez

Bernina Chicago 7 Hoop (100x100mm & 40x40mm)

Hoops compatible with the Bernette Chicago 7 Embroidery machine. There are two sizes, 100x100 mm and 40x40 mm. I have uploaded the solidworks file if you want to make any modifications. I have also uploaded a template that you can print…

Downloads
57
Likes
13
Rating
0
P
PrintablesViridian

100x100 First Level Calibration

One of our customers biggest issues is how to get the perfect first level. I put this up for anyone that may need it. One of our customers biggest issues is how to get the perfect first level. I put this up for anyone that may need it.

Downloads
56
Likes
1
Rating
0
P
PrintablesPhil

Super-simple X-Y Calibration (100x100mm)

If there is a problem with extrusion width and esteps you take always 100mm as reference. Then why are the most calibration just a few 10mm wide? Material could be maybe one reason and there also exist a “tri-leg” model what imitates the…

Downloads
52
Likes
0
Rating
5
P
PrintablesMannerMan

100x100mm ventilation grill

Typical ventilation grill for homeowners, similar to ones sold in hardware stores. I wanted one in a color matching my house reasonably well. I recommend printing in PETG for outdoors use, I printed it with no supports without issue. The…

Downloads
51
Likes
10
Rating
0

Pi - VESA - Mount 100x100

A mount for putting a pi on the back of a tv og monitor.

Downloads
51
Likes
1
Rating
0
P
PrintablesJanusz

JCD 8898 VESA 100x100 mount

I recently bought a JCD 8898 hot air soldering station. Unfortunately, I have very little space in my "office" so I came up with a VESA 100x100 mount. Together with the cheapest monitor desk holder, it works great. I created three…

Downloads
51
Likes
5
Rating
0
P
PrintablesRicardo Colombo

VESA Wall Mount 100x100 and 75x75

A simple solution for simple men (also works for women and non-binary people). PRINT IN PETG OR STRONGER. I made this because I couldn't find any designs that allowed access to the ports behind my monitor. It has 100mm of clearance from…

Downloads
50
Likes
7
Rating
0
P
Printablesharisma

VESA 100x100 mount for 8040 extrusion

A quick mount designed to hold sim racing button boxes which use the VESA 100 standard, to 8040 extruded profile. VESA hole pattern is slotted to allow for fine vertical adjustment. Fixings can be made to the profile on the top & bottom…

Downloads
50
Likes
17
Rating
0
P
PrintablesJaym77

Box 136x100x100 mm s víkem

Úložný box, u nás využitý pro skladování mikrotenových sáčků pro opětovné využití. Lze tisknout bez podpěr. Print instructions Materiál: PETG Výška vrstvy: 0,2 mm Podpěry: nejsou potřeba

Downloads
49
Likes
11
Rating
0
P
PrintablesAndre

VESA 100x100 Wall Mount Lock

Printed in PETG with 3 Outlines and 15% Gyroid Infill. This is just an additional component so that the monitor can be additionally protected against being lifted out. I would have liked to take pictures of what it looks like installed,…

Downloads
48
Likes
10
Rating
5
P
Printablesadw2001

Milwaukee Bin 100x100 2x R2.1

Milwaukee Packout lowprofile bin for the center slot. I am new to fusion

Downloads
48
Likes
5
Rating
5
P
PrintablesOtterleg Prints

Medium Graphic Tablet VESA 100x100 Mount / XP Pen 13.3 Mount

100x100mm XP Pen 13.3 Pro VESA Mount adapter. Designed for a 165x300 (screen) bevel of 16mm. Should be printed out of PETG at a minimum of 50% infill and mounted with M4X20mm screws w/ applicable bolts for the back. Printed on a K1 Max…

Downloads
47
Likes
7
Rating
0
P
PrintablesRedStar3DP

VESA 100x100 mini PC offset mount

Allows you to mount a mini PC to the back of your monitor without interfering with the VESA mounting holes. Made it a STEP file so you could mess with it as you please. I printed mine in PETG at like 6 perimeters with 20 mm solid around…

Downloads
47
Likes
4
Rating
0