Furniture foot 12cm
OnShape: https://cad.onshape.com/documents/0b1afeff4bbb6e3304c45303/w/a40c7bf5fa40da9514155257/e/1f61ecbdf03a766a697072e3?renderMode=1&uiState=663bbec35b996848df7c3a1c
- Downloads
- 38
- Likes
- 6
- Rating
- 0
104 models
OnShape: https://cad.onshape.com/documents/0b1afeff4bbb6e3304c45303/w/a40c7bf5fa40da9514155257/e/1f61ecbdf03a766a697072e3?renderMode=1&uiState=663bbec35b996848df7c3a1c
if you need a different size (Pot Lid outer diameter) write to me.
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
Plate stand for decoration, can hold plates with diameters from 10cm up to 15cm. Use a 1.75mm filament as hinge. Print instructions Infill 50% or higher, no supports. Use 1.75mm filament as hinge.
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
A planter for a 12 cm flower pot. (12 cm Übertopf)
I designed this set of a replacement cover plate and a toilet cleaning tab holder because I didn't want to buy the overpriced and overengineered original version (roughly 50€) and also not any of the 3rd party clones (around 25€). I had…
Mandala Schablone /Dot Painting Schablone um Muster auf einen Stein An alle Downloader, die keine BOTS sind: Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch (konstruktive) Kritik oder Erfahrungsaustausch ist…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Burger press with 12cm diameter i didnt printed it yet, so i dont know if it works properly
This is a heddle / backstrap weaving loom (not sure of the actual name in English) I made for my girlfriend. It fits the build plate of a BambuLab X1C, P1S and P1S perfectly. Required parts and material: 1x loom_hears.stl 2x handle.stl 2x…
Overview This is the 9x12cm version of 4x5" Standard film holder. It uses 0.5mm dark slide made from black plastic A4 folder. This will be my main film holders because of metric x-ray film dimensions. No supports Velvet sealed dark slide…
Simple storage box with a tray for a lid and embedded magnets Could be used for dice or anything else small dice sized
Here is a design i love to use for growing Basil. Thanks to the tank of water at the bottom the ground stays wet. I sometimes use Urtica as a fertilizer (1kg in 10l water for 14 days then diluted 10%). Seems to grow really well. I have…
Photo Frame - Picture Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape - Portafoto per Polaroid Update 07/05/2025: added Hex Polaroid 9x9 Frame_1 REV_C.stl, geometry cleanup Resize to adjust dimension If you download/enjoyed this file,…
This is addon for my 3D printed Galaxy Cluster rack. 3D Printed Galaxy Rack: https://www.printables.com/model/1173672-10-mini-rack-all-3d-print Print settings: 0.28 PETG
Mango para juego de puntas de destornillador de 4mm. Tiene una largura de 12cm. y posee un imán para la correcta sujeción de las puntas. Medidas del imán 2mm grosor x 10mm de largo x 5mm de ancho.…
How to use : Take your tank tube and put it through the bottom (the flat side) of the adapter. Put the assembly in the tank Close with the funnel. When you shake their should be very little play How to load : In your darkroom/bag remove…
Allows the use of Kallax glass shelves without needing to drill or screw into the shelf. It's also useful for sliding the glass in and out to remove things from the back. I remixed this to fit taller 40k models such as Knights and Flyers…
The Planter is designed for flower pots with a diameter of 12 cm and a height of 11 cm.
Shamelessly remade from pictures of a Noctua product that does the same thing. An adapter to mount a 12cm fan to a 14cm fan location. Print instructions Nothing special. Any type of filament and settings will do the trick.
Photo Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape Type Modulare - Portafoto modulare per Polaroid If you download/enjoyed this file, please leave a like - Thx
Automated active self-watering orchid system. Orchid is placed in the top half, the bottom is filled up with water. A lid separates the two parts. At set day intervals, the water is pumped up and soaks the orchid for 2 minutes before…
Impression recommandations: 15% infill PLA or PETG 0.20mm Organic support Used components: 12cm USB fan: https://www.amazon.fr/gp/product/B06XCTHQG3 Raspberry x1001 or x1004 NVME adapter: https://www.amazon.fr/dp/B0CPLF6JYX M3:…
4 models: 12cm wide skadis 13cm wide skadis 12cm wide skadis with 10% bigger holes for easy application of tools 13cm wide skadis with 10% bigger holes for easy application of tools If you would like to support me - you can buy me a…
CPU fan 12cm - grid. I'd recomend to sllice the bottom to make it flat :) No supports are required.
Kleiner süßer Drache mit Aufhängung - Breite ca. 19cm Länge 12cm Auch beim Druck mit nur einer Farbe ergeben sich tolle Farbnuancen aufgrund der geringen Schichtanzahl. PLA / PETG 0,2mm oder 0,1mm
This is one of my first self constructed models, so I am open for feedback :) The Fume-Extractor is designed to house a standard 12cm PC-Fan. You will need to print… - 1 Fan Housing - 2 Filter Housing - 2 Feet (optional) Additional…
Printed with SBS filament from Filx at 70% infill density For outdoor use you can also use PETG or ABS Please add a photo of your print to Makes
Shape your garden landscape by connecting these 22cm wide planters in any form using their dedicated plug connectors. The planter includes a drainer for improved water management.
The center piece for the 12cm card storage box, without slots
I designed this small component that serves to keep the contacts aligned for the exhausts of the model described. Again, the original would have cost too much. This component completes the model shown here…
Hello. I need to “repair” my 1080Ti fans because they started to make some weird noises and low the rpms, temperatures go higer, and… why no temperature and noise reduction upgrade ? First I want say the photos are of the first functional…
easy to print without support. material PLA; x4 screw 4mm x 30mm
This holder is meticulously designed to accommodate a G90 TRX and a 12cm fan cooler, providing a sleek and functional solution for your cooling needs. The versatile design allows you to customize the setup by drilling holes for the cooler…
I made a simple one fitting for 12cm broad decking boards. In addition I made small spacers for having the right margin to the wall or inbetween the decking boards.
This model was designed for Asus Prime AP201 ATX (mATX) case, and some big tower CPU cooler, like Thermalright Peerless Assassin 120 etc. Size 120x120 (12cm) like 12cm fan. 65mm (6.5cm) height - can be modified (scaled in Z-axis) in your…
PCB Mount 8x12cm 22gr on 0.2 20% infill 2 walls M3 mountingholes (6mm max thread + pcb) Ventholes below. Prints without supports Chamfer of any inner corner See my other pcb mounts for other dimenions. Category: 3D Printing
This model allows using 13cm fume extractor filters with a 12cm fume extractor. example fume extractor: https://www.amazon.com/gp/product/B0711LFYJ1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 and filter:…
Use 2 regular spax screws ~16mm long.
Its a longer Window Hook, when you have big stars to hang on your window, without laying on the window itself. I printed mine with PLA, but for stability, i would recormend printing it with ASA/ABS.…
Model purpose: to exhaust the printer and dissipate heat for the cabinet Applicable fan: length, width: 12cm height: 23.5cm-35cm Inlet/outlet outer diameter 78mm, suitable for 80mm telescopic tube (PVC tube/aluminum foil tube) Except for…
Height 10 cm / 4 inch Diameter 12 cm / 5 inch
A remix of a remix! After printing the plant holder from Hendrik0123 I discovered that Fejka apparently have different pot sizes and mine is way too big for that one. I resized it to make my 12cm diameter pot fit, removed the two hooks…
Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters.
Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters. Tyres…
Los agujeros para los tornillos los tuve que agrandar con un destornillador, ya que aun no controlo bien las medias, por lo demás cumple con su función Imprimido con Creality Ender 3 V3 SE en PLA
Info: simple 12cm hanger for metallic hole wall (1cm square holes) 40/50%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
A simple anchor plate for cable ties. I had some existing power strip holes in the back of my desk and wanted to reuse them to help with cable management (aka - out of sight, out of mind). Screw this to some hidden surface behind a desk…
Check the description in the the original post for 10cm version. I have printed only 10cm model so far, they are on the photos. Pls comment if anything is wrong.
Info: simple 12cm hanger for metallic hole wall (1cm square holes) 30/40%+ infill, 3 perimeters I have used PLA (so it is not that flexible) no supports
I have to manually change filaments to get multicolour. If your printer can print with multiple filaments, you'll have to figure out how to make that work on your printer.
Printable on Prusa Mini, Ender 3, and bigger printers without any problem. The .stl is a bit heavy but this is because the export is done in “super fine” mode :) You can pout M6 bolts in the holes in order to fix the tables to the height…
A very simple solder fan assembly to get the hazardous fumes away from you. There are two shroud versions, print the same length for one build. Category: Electronics
Wandhalter für den IKEA NYPON Übertopf in 12cm Beste Stabilität bei 3 Wandlinien und 25% Infill. Im Außenbereich am besten ASA oder ABS verwenden.
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
Large format photography frame reducer for my 8x10 holder. I shoot wetplates and need to do some 9x12cm sometimes. My printer in only 22cm wide so I designed it in two parts. Printed in PLA 15% infill and supports.
This is a Rack for 10 of the 12cm Citronhaj Spice containers from Ikea. The tolerance should be pretty tight, they slide right in for me. I printed them in PLA with 10% infill. But you could probably go lower. This definitely isn't the…
Please like before downloading the model . Thank you so much for your support ✌ Follow me on Instagram @artmancults for more models, prints and updates: https://www.instagram.com/artmancults/ bait model and bait form for fishing for…
Tappo Copri Foro Muro Caldaia diametro interno 12cm / esterno 14cm
Cache-pot minimaliste et robuste, conçu pour l’impression 3D, idéal pour plantes d’intérieur diamètre intérieur : 12.5cm
a 12cm x 14cm box with a chamfered edge on the inside to insure a correct fit, a 4mm wall thickness on the sides
You have to print 5 parts of the ball itself and 2 parts of ball joints for assembling and fixing everyting together. Easilly scalable, first picture is default 12cm ball, second picture is scaled to 50% (6cm). Printed with transparent…
A small table I made for a teacher at school so they don't have to bend their neck. You can use it for whatever you want. Is 12 cm by 13 cm.
Side wall bracket for a shelf with 12cm spacing. 15% Infill No Supports
BECAREFUL: Reduce the size to X=33.7968mm Y=33.7989 Z=122.3958mm or X=10% Y=10% Z=10%
This foot lifts the Ikea Alex drawers 12cm up. Now my vacuum robot can easiliy clean beneath it. Also is my worksurface now on a comfortable height. These feet are also recessed and angled on three sides, to make clearance for the floor…
I'm thinking – maybe I should revisit the idea of using a blower fan, but mounted differently? eg. something like Delta BFB1212HH-5M2P (12v, 4pin PWM like classic cpu fan) A single blower fan, blowing through the entire heatsink, makes…
print with chambered side facing up
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. hoof 12cm /twister 12cm /double twister 12cm baits set model and bait form for fishing…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 5mm cutout for plastic eyes…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. 2x bait lure 3D print mold 1. stl form of fish bait 12cm 8mm cutout for plastic eyes /…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish the hole for the screw is 6 mm…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. 2x bait lure 3D print mold 1. stl form of fish bait 12cm 7mm cutout for plastic eyes /…
This is a decorative, bowl-shaped planter featuring a clean lined texture that wraps around the exterior. The rounded profile softens the look of any shelf or desk, while the linear pattern adds depth and shadow. With a wide 12cm opening…
Side wall bracket for a shelf with 12cm spacing.
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 5mm cutout for plastic eyes…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 6mm cutout for plastic eyes…
My daughter wanted to keep her TÅGVIRKE, but with a holder placed on a flat surface. This is the solution. Please consider printing the holder sideways to improve durability of the clips, see bgcode or picture
Mountign bracket to mount lighter things to a T-beam without drilling hols to it. There are tunnels for 4mm Zip-Ties in different dirctions where things can be mounted. Two M5 threaded inserts are needed to screw the two parts together.…
Für mein OpenMediaVault OMV / trueNAS Projekt brauche ich einen Plattenstapel / Tray für vier 3.5'' HDDs. Achtung, es gibt eine neuere Version des Projektes… Der Plan: Unter PROXMOX werden via passthrough SATA Platten an ein NAS VM…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 6mm cutout for plastic eyes…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. 2x bait lure 3D print mold 1. stl form of fish bait 12cm 8mm cutout for plastic eyes /…
Für mein OpenMediaVault OMV / trueNAS Projekt brauche ich einen Plattenstapel / Tray für vier 3.5'' HDDs. Der Plan: Unter PROXMOX werden via passthrough SATA Platten an ein NAS VM (OpenMediaVault) durchgereicht und können hinreichend…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 5mm cutout for plastic eyes…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 5mm cutout for plastic eyes…
Yet another funnel to fill silica to organza pouches. Fits 12cm wide pouches.
This is a decorative 12cm dish mount for displaying art deco small dishes for viewing.
As explained in description the model is the adapter from the Air Duct of 12cm to 10cm hole (I used the window's one). Prepare to print and hardware I recommend printing in ABS because the air exiting is hot I recommend to use brim to…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish the hole for the screw is 6 mm…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish 5mm cutout for plastic eyes…
Angolo, giunto raccordo per zoccoli spessore 1,2cm e H12cm
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish the hole for the screw is 6 mm…
Griffabeckung für Alutec Euroboxen, mit Griffrand, selbsthaltend. REMIX Für die 60x40cm Boxen in Höhen 12cm, 22cm, 32cm. Die Griffabdeckung von @amrsuu wurde mit der Grösser der passenden Box beschriftet. Per Split und Auschneiden wurden…
Transform your IKEA FRIDFULL (12 cm) woven planter into a fully functional self-watering pot with this 3D printable insert. Designed to fit seamlessly inside the original planter without affecting its woven design, this insert keeps your…