Search results: 12v

Sort order

1,197 models

P
PrintablesBostra

IKEA Skadis charger holder Parkside 12V

I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…

Downloads
294
Likes
37
Rating
5
P
Printableschrisb

Knurled 12V Socket Cover - designed for Skoda Octavia III and universal use

Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…

Downloads
263
Likes
38
Rating
5
P
PrintablesBernd

6-fach o. 12-fach Bithalter für Bosch Professional Akkuschrauber GSR12V35FC

Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung

Downloads
156
Likes
32
Rating
5
P
Printablesadesir

Pied pour visseuse Bosch GSR 12V

La perceuse visseuse Bosch GSR 12V n'est pas stable lorsqu'elle est posée “debout” avec la batterie standard 2Ah. Ce socle sur mesure permet de stabiliser la visseuse. En bonus, six emplacements pour embouts de vissage palient un manque…

Downloads
73
Likes
12
Rating
0
P
PrintablesCodeplayer

12V MK52 heatbed cover

This is a remix of @Boogie created Heatbed cable cover: "A slightly simpler version of the heating bed cable cover with the possibility of tightening the screws for the contacts. For this cover you need a M3x12 screw to mount it." I just…

Downloads
33
Likes
0
Rating
0
P
Printableswinqooq

KuKirin G4 turn moto-signal holder and 12v sockets

It is necessary to extend the line from the rear LED-light 16 pin block: Black – GND (General contact) Yellow – + Turn right Green – + Turn left I used this 12v socket

Downloads
22
Likes
1
Rating
0
P
Printableskrobledo

Alitove 12V 30A PSU Cover

remixed so that it would properly fit the rocker switch also longer to fit a 12V to 5V step-down converter

Downloads
18
Likes
1
Rating
0
P
Printablescoxx

Parkside 12V battery holder

In case someone needs CAD data, send me message. I can share it STEP, PARASOLID, PRT, CATPART …

Downloads
2,232
Likes
236
Rating
4.95
P
Printablescoxx

Bosch 12V battery holder

Holder for Bosch 12V battery I edit inside shape (-0.1mm) - some of you had to applied offset...

Downloads
1,958
Likes
204
Rating
4.84
P

Bosch GSR 12V-15 Battery Screwdriver Holder

Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…

Downloads
1,447
Likes
213
Rating
5
P
PrintablesAlexandre

Bosch 12v GSR/GDR Drill Driver Impact Wall Holster

Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…

Downloads
1,406
Likes
158
Rating
4.89
P
Printablesstianberg2

Bosch 12V battery holder

A holder for 5 x 12V Bosch batteries. Easily attached to a wall using two screws. Upper layer can be printed using a different color for a nicer finish (see pictures)

Downloads
1,402
Likes
183
Rating
5
P
Printablesex-nerd

DeWalt 12V + 20V Battery Holders

I know there are a number of holders available for the DeWalt batteries but I decided to design/print my own after seeing complaints of “too tight” along with not seeing options for both the 12V and 20V battery sizes, not to mention the…

Downloads
1,356
Likes
353
Rating
4.86
P
PrintablesMads Skov

Bosch Professional 12V / 10.8V tool wall holders

I'm organizing my Bosch 12V power tools on a sheet of plywood on the wall in my workshop. With these 3D printed mounts, I can easily and safely hang my Bosch tools when they are not in use. All the tools hang on their battery socket. It…

Downloads
1,351
Likes
147
Rating
4.9
P
PrintablesPeter Serup

Bosch-12V_Battery-holder

Bosch-12V_Battery-holder - No Support There might be a slight variation the the dimensions of the batteries. this model should fit 3A (My 2A batteries have a slightly looser fit)

Downloads
1,333
Likes
204
Rating
4.75
P
PrintablesOtomar

Bosch GSR 10.8/12V wall holder

It is a remix of one design found here but i can not find the link now. It is shorter and i added one version with angle in case of mounting under the shelf. (As I did) Print Settings Printer: Pinky Rafts: No Supports: No Resolution: 0,4…

Downloads
969
Likes
115
Rating
5
P
PrintablesJosh Hartmann

12V Car Plug

Fits any standard 12V plug Friction fit, no rattling Easy to take in and out

Downloads
955
Likes
117
Rating
5
P
PrintablesDavid Holecko
Downloads
899
Likes
109
Rating
5
P
PrintablesSolidKnow

Milwaukee 12V 2.0Ah Batteryholder

This is a battery holder for Milwaukee 12V 2.0Ah batteries. I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit for 4.0Ah…

Downloads
864
Likes
105
Rating
5
P
PrintablesFlo Cmli

Bosch 12V battery holder

Bosch 12V battery holder Simple holder for ther 12V Bosch professionel batterys. I was searching for something that protects the batterycontacts. i can't find something that fits my needs or works right out of the printer. So i have to do…

Downloads
854
Likes
95
Rating
4.38
P
PrintablesJerryie

Car 12V plug cover

Car 12v plug cap No support Material: Pet-g or ASA (the temperature in the car can be higher in the summer)

Downloads
834
Likes
118
Rating
5
P
PrintablesGeorge

BOSCH 12V GSR Drill FlexiClick Attachments Holder

Holder for Bosch Professional 12V GSR Drill FlexiClick Attachments (Drill chuck, L-piece, etc.) Also see my other Holder for the 12V Drill iteself. Printed with Prusament PETG (Prusa orange). No supports, I printed with 25% linear Infill…

Downloads
820
Likes
115
Rating
5
P
Printablesdevlab

DC UPS (5V, 9V, 12V) based on LX-2BUPS module

DC UPS based on LX-2BUPS module (5V/9V/12V, with a USB Type-C power connector). This is useful for powering internet switch/router during a power outage. If you need 5V UPS with USB output, use this design instead. Aug 2024 update: I…

Downloads
809
Likes
98
Rating
5
P
PrintablesGeorge

BOSCH 12V Drill - Holder for e.g. Bosch GSR 12V(-35)

Holder for Bosch GSR 12V-35 (and other similar) Drills (most 12V Bosch GSRs should fit) Also see my other Holder for the different attachments (drill chuck, L-piece, etc) Printed in Prusament PETG (Prusa Orange) and holds up very well…

Downloads
808
Likes
122
Rating
4.89
P
PrintablesCyclenerd

Makita CXT Battery Mount for 10.8V / 12V

Simple wall mount for 10.8V / 12V Makita CXT batteries. Keeps batteries organized and safe. Category: Tool Holders & Boxes

Downloads
791
Likes
51
Rating
4.82
P
Printablesmilos

12V PARKSIDE Battery Adapter

The adapter for the 12V PARKSIDE Battery lets you click your battery in and use it in your projects! Step files and F3D files are included so that you can change the shape of the adapter to your needs. Electrodes made out of 0.5mm thick…

Downloads
790
Likes
84
Rating
5
P
PrintablesEtna.

Bosch 12V battery feet

This is a battery attachment for Bosch 12V 2Ah and 3Ah batteries for their power tools. With this you have a stand for your lamp, drill or other power tools. You simply clip it in with some force and can remove it with a flat screwdriver.…

Downloads
773
Likes
302
Rating
4.86
P
PrintablesNozzle

Bosch Professional 12V Akku Halter

Druck am besten mit PETG. Die Akkus werden eingeclipt und halten daher auch hängend.

Downloads
762
Likes
40
Rating
4.75
P
PrintablesSpeedyBP

Halter für Akkuschrauber Bosch GSR 12V-15 / Holder for cordless screwdriver Bosch GSR 12V-15

Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.

Downloads
753
Likes
57
Rating
4.8
P
PrintablesJohn

Parkside 12V

Support mural de batterie Parkside 12V. Battery holder Parkside 12V

Downloads
729
Likes
87
Rating
3.6
P
PrintablesSpeedyBP

Halter für Akkuschrauber Bosch GSR 12V-15 FC / Holder for cordless screwdriver Bosch GSR 12V-15 FC

Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.

Downloads
712
Likes
41
Rating
5
P
PrintablesAXUL

Enclosure for XH-M609 Low Voltage Disconnect 12V 24V 36V Over-Discharge Protect For 12-36V Lithium Battery

The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…

Downloads
711
Likes
52
Rating
5
P
PrintablesJH3D

BOSCH GWS 12V-76 Toolholder

Stl - Daten des BOSCH GWS 12V-76 Toolholder aus Thingiverse Link: https://www.thingiverse.com/thing:3971430 Danke an das Original. Ohne Support gedruckt.

Downloads
699
Likes
110
Rating
4.86
P
PrintablesOK1HRA

12V portable power bank (4S LFP 128 Wh) with USB charge/discharge

Remix from original idea by OK1BT @yourmum_52499 TNX! 100W discharge test BOM 4x LiFePo4 10Ah [ 1 ] or [ 2 ] Operate with terminal ↑UP 3x short 8x M6 nuts 8x M6 cable eye 1x QC4.0 QC3.0 PD 5A 100W [ 1 ] or [ 2 ] IMPORTANT! Check if you…

Downloads
682
Likes
383
Rating
5
P
Printableselmaker Design

Parkside battery holder - 12v soldering

Remix of https://www.thingiverse.com/thing:3274648 Parkside Battery adapter to fit new Parkside battery Tested and works on PAPK 12 A2 01/2020 production Also PAPK 12 A3

Downloads
662
Likes
77
Rating
5
P
PrintablesCPS_Systems

Milwaukee M12 Charger 12V Wallmounts Damage Free, Skadis, Screwless option

Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…

Downloads
654
Likes
96
Rating
5
P
Printablescjfoss

Makita 12v CXT Tool Holder

Screws to a shelf to hang 12v CXT Makita tools from the battery interface. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Tecor PLA+ Black Category: Tool Holders…

Downloads
623
Likes
36
Rating
5
P
Printablestakara

Battery wall mount for Bosch GSR 12V 2Ah

I couldn't find a wall mount for the batteries of the Bosch GSR 12V, so I made one. It can be fixed to the wall with two 40mm screws. The holder is slightly tilted for convenience. Update 2023-11-12: Added a non-branded version

Downloads
616
Likes
76
Rating
4.5
P
PrintablesFestool

Festool Battery holder 12V

Festool battery holder 12V - simplify your tool management Tired of searching for your power tool battery? Mount your battery on the wall for quick access, while organising them according to their charge status. Make your everyday work…

Downloads
605
Likes
78
Rating
5

Flashforge Adventurer 5M (AD5M) LED mod accessory - buck converter MOUNT for inside back of printer (24v -> 12v inline, etc) v1.0

NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…

Downloads
575
Likes
129
Rating
5
P
PrintablesStaafi

12V H11 bulb load test light

Cup to hold H11 55W lightbulb. Can be used for load testing of automotive or other 12V circuits. The cup prevents bulb burning your hand or car interior while testing. There are small holes in the cup wall to allow better visivility of…

Downloads
540
Likes
24
Rating
5
P
Printablesanalogicparadox

Corsair 12VHPWR Cable Comb (Slim)

Remix of Eduard3D's model. This version allows the cables to sit closer together. The hole diameter is the same, I just changed the spacing between them. This version is specifically made for the Corsair 12VHPWR cable, as it only features…

Downloads
529
Likes
57
Rating
5
P
Printablessvobo

Battery holder for Bosch Blue 12V battery

This compact holder can be screwed or glued under a shelf and holds a Bosch Blue 12V battery. It prints without supports in horizontal or vertical orientation.

Downloads
529
Likes
75
Rating
4.7
P
PrintablesThomas Satterly

Bosch 12V Battery Holder Wall Mount

This battery holder is perfect for securely organizing your Bosch 12V batteries. Batteries are firmly held in place with a satisfying "click" (similar to inserting a battery into a Bosch tool), so you can mount the holder in any…

Downloads
505
Likes
54
Rating
5
P
PrintablesTorkild

Modular Router Plate for Bosch GKF-12V

Modular router plate for the Bosch GKF-12V. Highly inspired and based on thing 3707881 by EpicFazer. I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the…

Downloads
494
Likes
110
Rating
5
P
PrintablesMAKERTEAM®

MT-SYSTEM Holder: BOSCH Battery Holder 12V (Halter für BOSCH-Akku)

Now you can arrange your Bosch batteries as you want it. This holder fits perfectly to the original batteries. Available in TWO versions: Mounting on profiles: The holder has a mounting hole for a M4 screw to fix it on an 20x40mm…

Downloads
471
Likes
52
Rating
5
P
Printablescsi

Bosch GEX 12V/18V-125 C35 Adapter

Just another vacuum adapter for the combination of GEX 12V/18V-125 with Boschˋs ClickˋnˋClean system or C35. Itˋs modified to fits stronger to ensure that the adapter can not release. Printed in PETG recommended. Itˋs a remix from…

Downloads
457
Likes
62
Rating
3
P
PrintablesJan Zajíc

makita 12v adapter (nicd) to parkside battery

adapter uses 2Ah parkside x12v team battery

Downloads
448
Likes
27
Rating
4.67
P
PrintablesBricbasher

Best Dewalt Battery Mount With 2 Screw Holes & Notch for 12v Too

I printed with PETG, 15% infill, 0.20mm quality settings, no support. I printed these standing up as they would be mounted on a wall. The notch was made in PrusaSlicer using the “add negative volume/box” tool.

Downloads
446
Likes
137
Rating
5
P
PrintablesPeter Serup

Bosch-12V_Akku-tool-holder

Bosch-12V_Akku-tool-holder - No Support

Downloads
441
Likes
62
Rating
5
P
Printablespeto.r_

DeWalt 12V battery wall mount holder

Easy and nice robust DeWalt 12V battery holder mount on wall. With DeWalt logo on top side. Printing instructions: ■ Steel sheet ➔ at your own preference (textured PEI for PETG material) ■ Nozzle ➔ 0.4 ■ Material ➔ PETG/PLA ■ Infill ➔ at…

Downloads
426
Likes
31
Rating
4
P
PrintablesMr. Togi

Starlink mini Netzteil 12-48V mit Step-up Booster für original 15m Kabel / Power Supply for 12V and 15m cable

(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…

Downloads
423
Likes
31
Rating
0
P
PrintablesDrTob

Bosch Professional 12V Akku XT60 Adapter

Adapter from Bosch Professional 12V Akku to XT60

Downloads
421
Likes
47
Rating
4.5
P
PrintablesJFKonstruiert

Bosch GSR 12V-35 FC L-Boxx Mini inlay

This 4 piece inlay for Bosch/Sortimo L-Boxx Mini stores the Bosch GSR 12V-35 FC with its accessories and nine ¼'' Bits. The L-Boxx mini has to be modified a little to make it fit unfortunately. The back-left slot has to be removed with a…

Downloads
421
Likes
110
Rating
4.5
P
Printablesmrjoda

Circle router jig for Bosch GKF 12V-8

Hello, A Bosch GKF 12V-8 is a little bit challenging for milling a circular holes. None of the jigs for circles fits it. Therefore, I designed my own jig. The input requirement was a wide range of radius - usable for small tweeters and…

Downloads
400
Likes
74
Rating
5
P
PrintablesUGhpbAo=

Makita 12V CXT Battery Connector

WARNING: The Makita CXT batteries do not appear to have built in battery protection, hence you will destroy them if you over discharge them. It is recommended that you fit a 3S BMS as part of your build. The terminals are designed to take…

Downloads
397
Likes
30
Rating
5
P
PrintablesSolidKnow

Milwaukee 12V 2.0Ah Batteryholder Long

This is a battery holder for Milwaukee 12V 2.0Ah batteries. (Long Version) I have developed it on an 2.0Ah battery. Special feature: This holder uses the original locking mechanism of the Milwaukee battery. Secure hold. Note: Does not fit…

Downloads
390
Likes
42
Rating
5
P
Printableskarearea

Bosch 12v battery holder

made in PETG 3 walls

Downloads
386
Likes
46
Rating
5
P
PrintablesAnubis X

Bosch 12V battery adapter to Makita

Battery adapter for Bosch cordless screwdriver 12 volts to Makita battery 14.4 volts.

Downloads
384
Likes
47
Rating
5
P
PrintablesHonzaTrykar

Parkside X12V tools holders

Tool holders for Parkside X12V series. I did not find any proper wall mounts fot tools so made them for those tools that I currently have. I included a shape that fits inside X12V tools in place where original battery is( in Fusion 360…

Downloads
377
Likes
57
Rating
0
P
PrintablesCvamu

Tobsun 12V/24V to 5V cover

Cover for the Tobsun 12V or 24V to 5V converter found in the Voron 0 BOM. Is also usable for powering a Raspberry Pi on most 3D printers.

Downloads
374
Likes
57
Rating
5
P
PrintablesThomas Satterly

Bosch 12V Charger Wall Mount v2

This is a drop-in replacement back plate for the Bosch 12V charger (model GAL12V-20) that allows you to mount the charger to a wall. The mounting slots allow the charger to be mounted either with the text right-side up or upside down. A…

Downloads
368
Likes
55
Rating
5
P
Printablesmak77

MAK Military Style 12V Power Bank

12V Pb power bank, ideal to drive 12V COB LED light strips, i.e. in a gun safe internal installation, where no other power source may be available and the safety is valued. Pb battery is much more safer than modern LiIon/LiPo batteries –…

Downloads
364
Likes
73
Rating
5
P
PrintablesDablues

Parkside bateria 12v

Soporte para pared, baterías parkside de lidl, 12v.

Downloads
364
Likes
55
Rating
0
P
PrintablesZarkex

SKADIS Bosch / Dremel 12V Charger Mount (GAL 12V-20)

Just remove the two Phillips-screws put the bracket in and screw them down again.

Downloads
357
Likes
59
Rating
4.88
P
PrintablesTate Gardener

Dewalt 12v Tool Holder

Holds Dewalt 12v Tools.

Downloads
353
Likes
28
Rating
5
P
PrintablesSolidKnow

Bosch Professional 12V 2.0Ah Batteryholder

This is a battery holder for Bosch Professional 12V 2.0Ah batteries. I have developed it on an 2.0Ah Professional battery. Special feature: This holder uses the original locking mechanism of the Bosch battery. Secure hold. Note: Does not…

Downloads
352
Likes
32
Rating
0
P
Printablesprintiq

Makita 12V Li-Ion Battery wall mount

[ENG] Compact Battery Holder 12V for Makita Cordless Tools (Remix) Description: Introducing a streamlined remix of the original 12V battery holder for Makita cordless tools. This compact version offers optimized print time and filament…

Downloads
349
Likes
24
Rating
4
P
PrintablesSam

Terminal Adapter for 12V 7Ah Battery Type

This is an insulating terminal adapter for a 151x65x93mm SLA battery. For my hobby applications I wanted to have a safe connection to avoid unintentional shortcuts and additionally have an integrated fuse directly at the battery terminal.…

Downloads
348
Likes
75
Rating
5
P
Printablesgerrrciu

Mounting bracket for Parkside X12V charger PLGK 12 A3

Created a little and simple screwable mounting bracket for Parkside X12V charger. Print with 3-4 perimeters, 0.2mm layer. Designed for PLGK 12 A3 but maybe it will fit other chargers It is best to print it standing up as it is in the file

Downloads
342
Likes
57
Rating
5
P
PrintablesKnurbine

Bosch 12v battery base

This is a battery base for the newer Bosch 12v battery modules, which also fits the Dremel 6250+ battery units. I designed this to replace a battery base that I damaged when opening the battery. It can serve as a basis for modern battery…

Downloads
340
Likes
66
Rating
5
P
Printablesswiss_beluga

Bosch GSR 12V-15 wall mount

Just a little mount I made for my beloved Bosch GSR 12V-15 drill. Fits nicely, it's not too thight so you can easily store your drill in it. ------------------------------------------------------------------------------------ V1.1 Update…

Downloads
336
Likes
45
Rating
4.86
P
PrintablesJevermeister

TOBSUN DC-DC 24V/12V to 5V converter din rail mount

TOBSUN DC-DC 24V/12V to 5V converter din rail mount Based on the VoronUsers 2 channel relay mount and I also added the unmodified Voron 2 DIN rail clip for your convenience. This fits the DC-DC converters which are e.g. part of the Voron…

Downloads
335
Likes
28
Rating
5
P
PrintablesHans

osVAC neo Adapter for Bosch GEX 12V-125 Orbital Sander M32 and F32

This is a osVAC M32 adapter for the Bosch GEX 12V-125 orbital sander. With the F32 counterpart for the original dust collector. There are 3 models: Bosch 12V M32.stl: the standard model. Bosch 12V M32 Tight.stl: a tighter version. For…

Downloads
331
Likes
39
Rating
5
P
Printablessstoyanoff

A23 12V Battery Holder Box

Holder box for A23 12V battery, compatible with battery connectors 8.8 mm wide like the ones on the photos. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: 3D Line PLA…

Downloads
325
Likes
16
Rating
0
P
PrintablesCenedd

Wallmount 12v holder for Bosch, Milwaukee and Parkside batteries

Holds Bosch, Milwaukee and Parkside 12V batteries. Takes two 4x35mm screws, assuming 30mm depth wall plugs. Battery clips in for retention. It is possible to pull the battery out without pressing the release since the underside of the…

Downloads
324
Likes
36
Rating
5
P
PrintablesHyta

12V socket cover cap

Cover cap for car 12V socket or car cigarette lighter. 2019 12 04 Added flex version of body. Suitable filament for body is Flexfill TPU 92A "Traffic Black" (Fillamentum) Print instructions Printer Brand: Prusa Printer: i3 MK2.5…

Downloads
323
Likes
13
Rating
4
P
Printablescoxx

Bosch GOP 12V-28 holder

Holder for Bosch GOP 12-28

Downloads
323
Likes
34
Rating
5
P
PrintablesRDreyer

Barbecue BBQ EDF Blower Bosch 12V Battery

You need 6 Screws M3x8 , Servo-Tester-Board, Brushless Outrunner 2838 (Front Mounted!), Small ESC, Mini Power-Switch 9 x 13 mm. Maybe you have to adapt the hole in the Fan for the Motorshaft.

Downloads
314
Likes
131
Rating
0
P
Printableswoelpi

Gridfinity BOSCH 12V battery holder

Just a nice Gridfinity holder for the BOSCH 12V battery

Downloads
311
Likes
27
Rating
5
P
Printablessvobo

Holder for Bosch Blue 12V cordless drill

A holder for the 12V Bosch professional cordless drill. It can be screwed or glued under a shelf. Print in vertical position for strength, when printed with the flat side down it tends to break. This holder was inspired by the more…

Downloads
310
Likes
35
Rating
4.6
P
Printableslo-tek-hi-life

Milwaukee 12V Battery Cover

This model is a replacement cover my coworker designed for the Milwaukee M12 battery. It works for the small stubby type shown in the picture. The cover clips easily onto the battery geometry and holds tight. It also has a spot for the…

Downloads
310
Likes
38
Rating
0
P
PrintablesCPS_Systems

Makita CXT 12V 1-4 Place Battery Non-Latching Holders Mount

Makita CXT 12V (10.8V) 4 place battery holder. Includes files for 4, 3, 2 and 1 battery holders. 4 place holder is 253mm x 17mm overall. No supports needed. Print on edge as pictured. Edit: Added V2 40mm holes and labelled. Tool holder…

Downloads
302
Likes
25
Rating
5
P
PrintablesSimon Niessalla

Bosch GSR 12V-15 gridfinity module

I printed in PLA with a 0.6mm nozzle. 5% gyroid infill and 2 perimeters are absolutely fine, just make sure your bed is properly cleaned and leveled, add mouse ears in prusaslicer in case of warping issues.

Downloads
298
Likes
44
Rating
4.67
P
PrintablesJEO

DeWalt or Harbor Freight Hercules Battery Powered Light (12V to 24V LED Light Bulb)

First, the original I modified is a very beautiful structure. Please check it out. I've bought battery backup bulbs before and when the power went out, they were not very bright. I made this for any power outage and with several batteries…

Downloads
296
Likes
102
Rating
0
P
Printablesnicosandller

12V DC motor with gearbox - DC12V66RPM

Just a model to use in other models for reference. Uploading Fusion 360 and STL file so you can import it on your design to use for reference. I also added a test plate to print and test on your DC motor to see if it matches the…

Downloads
295
Likes
14
Rating
0
P
PrintablesRussellZ

Bosch 12v drill mount

Prints without supports. You should be fine with any size nozzle and layer height. You shouldn't need any infill, but extra vertical perimeters will add strength. I added angled screw holes to the top so you can easily drill into the…

Downloads
292
Likes
37
Rating
5
P
PrintablesClslee Lee

Bosch 10.8v/12v battery holder

Bosch 10.8v/12v battery holder

Downloads
291
Likes
42
Rating
4.67
P
Printablesslvnjl

Skadis – Bosch professional 12V battery holder (T-nuts system)

A Bosch Professional 12V battery holder for the IKEA Skadis board, designed to be used with the T-nuts system. Remixed from this model . – It requires: Two M2.5 T-nuts (grab it here ) Two M2.5×16mm screws The model has a front 5mm hole…

Downloads
290
Likes
56
Rating
4.88
P
Printablesboso

Bosch GKS 12V holder

Holes for screws are 3mm in diameter. Print Settings Rafts: No Supports: No Resolution: 0,3 Infill: 10 Category: Tool Holders & Boxes

Downloads
284
Likes
39
Rating
4.67
P
Printablesmelnikod
Downloads
284
Likes
26
Rating
0
P
PrintablesoXiVanisher

Gridfinity storage for Bosch GWS 12V

A 5x3 gridfinity storage for Bosch GWS 12V.

Downloads
284
Likes
46
Rating
0
P
PrintablesKelson Silva

Parkside Cordless jigsaw 12V wall mount

I have printed this mount with PLA with 0.2 lines. There are 3 holes to screw it to a wall or wood board.

Downloads
283
Likes
60
Rating
5
P
Printables6d6178

Bosch FlexiClick FC Holder 12V for Ikea Skadis, GSR 12V-15 FC, GSR 12V-35 FC

This is a holder for Bosch 12V FlexiClick Attachments (GFA) for IKEA SKÅDIS pegboards . It's compatible with attachments for Bosch GSR 12V-15 FC and GSR 12V-35 FC. It uses Skadis T-Nuts for secure, rattle-free attachment to the pegboard.…

Downloads
283
Likes
70
Rating
5
P
Printablesjon

Parkside 12v 5 Ah Battery

UPDATE: Added a new and improved version that fits the tools way better and has better tolerances. This is 12v Parkside Battery designed for 21700 Lithium cells. you can therefore achieve capacities exceeding the Parkside Performance 12v…

Downloads
282
Likes
39
Rating
0

Festool Systainer Bosch 12V Akkuschrauber Halter - Bosch 12V cordless screwdriver holder

Allgemeines Ein Halter für die Bosch GSR / GSB 12V Serie. Der Halter wird einfach in das vorhandene Fach Vorne oder seitlich am Systainer eingeschoben. Druckeinstellungen Drucker: Creality Ender3-S1 Schichthöhe: 0,20mm Infill: 15-20%…

Downloads
282
Likes
56
Rating
0
P
PrintablesDiego E.

Honeycomb Metabo Akku 12V Mount

Its remix of a wall mount. I use it for my Metabo PowerMaxx BS 12 Akkus. According to the Lawny (Guy which kindly designed it in triple format), it can be used as well on Milwaukee and Bosch. I used 2x M4 inserts from honeycomb storage…

Downloads
282
Likes
35
Rating
5
P
PrintablesAlexa3D

Bosch GKF 12V-8 Fräszirkel - router circle

Bosch GKF 12V-8 Fräszirkel in der Länge (Radius) verstellbar. Ihr wollt große schöne Kreise fräsen? Keine Lust auf Stichsäge? Kreise bis knapp 2m Durchmesser sollten kein Problem sein. Die kleine Platte kann über drei (oder sogar mehr)…

Downloads
282
Likes
67
Rating
5
P
Printablesondra_1121
Downloads
280
Likes
31
Rating
0
P
PrintablesIra S

Dewalt 12V & 20V Impact Driver triple bit holder

There are 2 files here, one for the 12V tool and one for the 20V tool. Both hold 3 hex bits. Printed on Prusa MK3 with PLA. No supports needed.

Downloads
278
Likes
36
Rating
5