539 models
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
Temperature tower from 220 degree to 190 PLA BAD: 70 degree C
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Immerse yourself in the world of automotive elegance with the Mercedes 190SL wheel, a perfect harmony of timeless style and unparalleled performance. This wheel embodies the excellence of Mercedes craftsmanship, combining quality…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Given the disparity in our heights the front seats in her B200 are adjusted forwards and backwards rather regularly. This is done by lifting the lever under the seat, and scooting in the desired direction. However, while the Benz is in…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
This 3D model is a custom-designed phone holder for the Mercedes 190E, created to seamlessly blend with the car’s classic interior without disrupting its aesthetics. Unlike modern phone mounts that look out of place, this design…
Print approx. €2.95–€3.60 excl. taxPreliminary estimate for one variant
I needed a way to hold my intervalometer easily to keep it dry and stop it from damaging the delicate pins if it fell. This tidy simply slides onto the leg of a Manfrotto 190B tripod (dia 26.5mm) and is secured with a M5x12 cap-head…
Print approx. €5.57–€6.80 excl. taxPreliminary estimate for one variant
In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a 1908FPc monitor and a 3D printed bracket that…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
Original lid has cracked and this is 3d printed replacement. Size is 189x189mm to fit 190x190mm hole.
Print approx. €14.71–€17.98 excl. taxPreliminary estimate for PETGSource material: PET
just print out no parts just simple printing easy to print.
Print approx. €13.94–€17.04 excl. taxPreliminary estimate for one variant
This 3D printed gear is meant to serve as a direct replacement for the Zig Zag Cam Gear in the Sears Kenmore 148.12190 series of sewing machines. This was designed and tested on a customer's machine and made through my custom gear service…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
11/22/22 update: If you are interested by RC boats check my other design at https://www.printables.com/model/322399-zryw-1-an-hydrofoil-rc-passenger-boat ------------------------------------------ This is a project I did in 2021. I'd been…
No supports I wanted to add a few more things to test on a temp tower and also use minimal filament. I came up with this fever dream abomination. Enjoy! Instagram https://www.instagram.com/spitzspot/ Print instructions Category: 3D…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Model description The Embraer 190 is a narrow-body short- to medium-range twin-engine jet airliner, that can carry up to 114 passengers, manufactured by Brazilian aerospace manufacturer Embraer. The Embraer 190 is fitted with two…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
Mercedes Benz 190E Easy to print. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible and easy to remove. If you like to see more car…
Repair Clip for Clothes Drying Rack The metal rungs of drying racks tend to snap off after some time, leaving the metal part dangling. This clip fixes that. You will need to bend the rung so that it securely attaches to the clip. The clip…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
PLEASE READ THE ASSEMBLY MANUAL PDF!!! Print Settings Printer brand: Bambulabs Printer: Bambu P1S Rafts: No Supports
Temperature tower calibration Print instructions 0.20mm layer How-to customize the temperature range:…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…
Description PDF Easter egg Another Easter egg model based on mandala geometry. Model is optimized for print without supports. Print instructions material: PLA infill: 20% gyroid layer height: 0.2mm supports: no Recommended filament:…
Open the corresponding 3mf file with "Open project...", select your filament and nozzle, use 0.2mm layer height, slice it and switch to the temperature tab. Check that there are multiple temperatures. --> Print and have a look at the…
Originally published here: Xiaomi Redmi Note 8 Pro m1906g7 case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8 Pro , which model number starts with "m1906g7", it will not work with Redmi Note 8 T or the regular…
Hello, It's been a while since my last models. Here is a steam rail car made by Austrian company GANZ abot the beginning of the 20th century. The model was used in Bulgarian state railways between 1903 and 1929 under the name BDZ Series…
This model is compatible with the lego system.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
This is a replica model for Mercedes Roadster 1960 (WIP). I'm not sure if it is possible to connect pins & tires to main since the body has fender skirt. Please feedback. update01 : I've added main body parts one by one for remix editors.…
RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.
The final piece in the WW2 Fighter Kit trilogy! The Focke Wulf FW 190 Würger (Shrike) takes to the skies to meet the Mustang and Spitfire in aerial combat! Like the Spitfire and Mustang kits, there is no hanging loop variant of this…
Included is My form fit grip design. 190mm Barrel Shroud, Modded Trigger, Thicker Shroud clip, 10rd clipazine Print whatever res you like, No supports Needed Category: Art
UPDATE: All new files plus 62 more sizes are now posted on MakerWorld.com . Join me over there and leave a 'Boost' if you find these helpful! Unable to print? Visit my Etsy or eBay links to purchase the prints instead! — — — — — — — — — —…
This model is compatible with the lego system.
Update 26 March 2023: Version 1.2 is now live, featuring numerous fixes for minor oversights. Details in the changelog file. Approximate dimensions of this model at 100% scale: 25.5"/65 cm length, 4"/10 cm beam, 10"/25.5 cm height. All…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Focke-Wulf is very realistic Print in place kit card , Assembly required
This model is compatible with the lego system.
Here are some Temp Towers which you can easy use in the range which is needed in your case. You can coose a Temp Tower which is suitable for you. Each Temp Tower has a spread of 30°C which should be enough to calibrate your filament. The…
required equipment power switch of your choice 10000mAh battery gps module ipex to sma connector/wire "soldering/heat shrink m2.5 x 4mm bolts for mounting switch otherwise its the same as the original.
Ford model S roadstar 1908 scale 1:18 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
I remixed the excellent Rugged Box to hold my mobile, temporary installation Meshtastic box. It currently holds 2x 18650 batteries in parallel and has space for 4 magnets so you can stick it to a steel surface. The plate is modeled for a…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
v2 Update : A little bit slimmer profile, and some model flaw fixes. Designed as a small profile mount for the Wisblock RAK19007 board from RAKWireless. This will allow it to be screwed to a basic enclosure grid mount found in a lot of…
MODEL FOR MANOMETER GAUGE TEMPERATURE, VOLTAGE, OIL PRESSURE, LAMBDA PROBE 52MM STANDARD FITS IN THE AIR WINDOW
Este diseño lo hice antes de este otro https://www.printables.com/es/model/540502-soporte-telescopico-de-altura-variable-para-auricu. Es una pieza para impresoras no muy grandes y que se imprime en dos partes. La altura para auriculares…
This model is compatible with the lego system.
The Focke-Wulf Fw 190, nicknamed Würger[b] (Shrike) is a German single-seat, single-engine fighter aircraft designed by Kurt Tank at Focke-Wulf in the late 1930s and widely used during World War II. Along with its well-known counterpart,…
Originally published here: Xiaomi Redmi Note 7 & 7 Pro m1901f7 case by tato_713 - Thingiverse This case was teste on the phone Xiaomi Redmi Note 7, it may be compatible (because its size) with the Xiaomi Redmi Note 7 Pro (model M1901F7S).…
RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This is a case for the Heltec Vision Master T190 for Nerdminer Bitcoin Mining. Has a 30mm Case fan that can be powered from the board adapter itself. Also a pedestal to allow better stability on a desk. Design allows multiple devices to…
aircraft based on the Wright Flyer I 1903 suspended print, to also represent some of the tie rods present in the real model. relatively simple print, the pieces are joined with small pieces of filament, as shown in the photo. To be extra…
This 190pcs design is a remix to the 100pcs hex bit holder by FinLepi.
unless it copied my script into the model you'll have to set it up. here's the layers with temp in case it doesn't. 20% infill layers 13 230 layer 47 225 layer 81 220 layer 114 215 layer 148 210 layer 181 205 layer 215 200 layer 248 195…
This model is compatible with the lego system.
Remix of https://www.printables.com/de/model/103003-drip-irrigation-ring/ for bigger pots. Added additional peg holes for increased stability and to make leveling easier
Celebrate a pivotal era in automotive history with this 3D printable STL model of the Mercedes-Benz 190E. This classic compact executive car model is perfect for automotive enthusiasts and fans of 80s automotive design, offering a refined…
Fiat 1216HP year 1902 Ondersteunt: Ja Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This model is compatible with the lego system.
This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes. I designed this for a friend, who was building a scale RC FW190. Most of the parts will print fine without supports, but the mount will…
210mm total width. Updated with more useable base legs. Pic is my best shot at it.
This is a replacement change lever (also known as a forward/reverse switch) for Makita drills. Save some time and money by printing this replacement part yourself! This design is a replacement for part number Makita 419041-9. This part is…
UPDATE: Added a top antenna version. Commercial Use and Attribution Notice: Alley Chat DroNode © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling…
Mounting plate for a RAK Wireless 19007 base board, using M3 screws
Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…
This is my Colt 1903 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
This is a simple case for the rakwireless RAK19003 Mini Base Board to, in combination with the RAK4631 or RAK113100 Core Modules, create a very simple USB connected Meshtastic node. My goal here was to create the most minimalist case I…
This mounting plate allows you to mount a RAK19007 board to an enclosure with the commonly found mesh plate as seen here: https://a.co/d/iQgPNPy . Use M3 or #6 size screws for mounting to the enclosure. For the board itself, the screws…
This is an all-in-one PLA/PLA+ Temperature Tower inspired Tronnic! I've duplicated it along the y-axis and added "X" and "Y" letter indents so that ghosting/ringing is tested for each temperature along with the original tests to take…
A scan of the first manned airplane built by Wilbur and Orville Wright, from the collection of the National Air and Space Museum. Originally uploaded to the Smithsonian 3d digitization archive .
Ford model T coupe Year 1909 Ondersteunt: Ja Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA
Mas modelos en mi perfil
Knop für den Schiebregler der Lüftung am Mercedes 190E. Button for the fan regulator of a Mercedes 190E. 3mf file should already be colored with white in the middle of the button. Pictures in the car will follow.
PLA Temperature Calibration Tower (190 °C – 230 °C) – Creality Ender-3 V3 SE This is a ready-to-print temperature calibration tower for PLA filament , designed specifically for the Creality Ender-3 V3 SE . The model helps you determine…
Guide rail adapter for the Bosch GKS 190 Professional circular saw. For inspiration I used “ Bosch GWS 10.8V / 12V Guide ” by @ HAMMER_T . The design is for a 50x30x3mm aluminium profile…
This is a model of the Mercedes Benz 190E Trunk Badge. I've looked everywhere for the original and have not found it so I decided to make one myself. It's not perfect, and it's not 100% up to scale but it's very close to the original size…
Tour de temperature 220°/190° Imprimer en couche de 0.2 mm. Avec jupe ,pas de supports.
The corners are labelled A, B, C and D and the side panels with the two letters of the corner panels between which they are placed. The center panel is not modified. If you have more than three rows of panels in the A to C (B to D) axis…
This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…
Originally published here: Xiaomi Redmi Note 8 m1908c3j case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8, phone which model number starts with "m1908c3j", it will not work with Redmi Note 8 T or Redmi Note 8…
Heat tower (190-240°C). With or without a bridge test. Teaching Tech has a good video featuring this Thing: https://youtu.be/3yIebnVjADM?t=266 DoogieRick also uploaded a video with this Thing. Cool :) https://youtu.be/FPumsgvBt00
80's Dodge RAM for WPL Frame (1/16th) This is version 2 of my remix originally posted on thingiverse . The original model requires a lot of glue to be held together. This remix features a lot of improvements, such as being assembled with…
SALAMMBÔ BY ANTONIN IDRAC, 1903 Gustave Flaubert. fixed in Blender, meshmixer and makeprintable. Make sure its flat on bed. or sink a bit below bed before slicer if printed standing straight up. Scan by Geoffrey Marchal…
Adapter mount to install RAK Wireless 19003 mini baseboard to enclosure with 5mm grid hole pattern. Also includes adapter for 2000mah flat pack battery and Waveshare solar controller (D version). The onboard solar charging on the RAK…
The Pope C/60 V year 1907 Electric car Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…
I liked the design of the original model by @Rossano_295112, but my GGC-H20L DVD Blu-Ray HDDVD drive is too long (190mm) so I had to resize the original to fit my drive. Depending on your printer you might have to scale the model a bit in…
Filament: - JAYO - white - PLA+ - ERYONE - Marmor - PLA Objektgröße: ca. L:B:H in cm 14:17:25 Drucker: Bambu Lab X1-Carbon Düse: 0,4 Schichthöhe: 0,2 Infill: Variiert zwischen 5% und 10% Stützen: keine Druckzeit: - Fuß: 2h:52min - Block:…
Modifications to fit a physically largery battery
IMPORTANT: The panels are difficult to source so I don't recommend using this model anymore unless you can find the exact panel. I have a new version in the works with a more reliable supplier. My goal was to create a durable solar…
Use these magnets to fit it in the lid to attach to an iPhone or Android phone with a magnetic ring attached.
Fiat 16/20HP Roadster 1903 scale 1:24 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
