Search results: 1g

Sort order

Counting matching models…

P
PrintablesShrimp Workshop

the whistle - 1g loud dual note keychain

simple, but loud two tone keychain. due to about 4kHz + 4,75kHz combination extremly noticable and loud. no supports needed. prints ~3 minutes, and uses ~1g of filament. (i achieved ideally 1g with 10% infill and ASA) Print as many as you…

Downloads
5,536
Likes
919
Rating
4.58
P
PrintablesCreativus

Small Fast Test Cube - Small Fast Calibration Cube 1cmX1cm 1g of filament! 0.5m!

Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…

Downloads
2,185
Likes
46
Rating
5
P
PrintablesDJ007

Worlds Lightest 1gm Functional Ring Counter. (Vase Mode/Spiral print) , A Must have! knitting counter

Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…

Downloads
855
Likes
357
Rating
4.2
P
PrintablesStillwaterstoic

24 pc Valcambi Wallet 1G Silver Bar Case

Storage for 1g Valcambi silver bars There was another 24pc Valcambi Wallet that has since been removed before I was able to print it, So i made a similar version. Print the base at 101% scale and the lid at 100% for best fit no supports…

Downloads
550
Likes
17
Rating
0
P
PrintablesRygar1432

65mm Whoop Frame / 40mm Props / 21g / Micro Quad

THIS IS A 65mm MICRO WITH 40mm PROPS THAT WEIGHS 21g AWG!!!!!!!!!!!!! Back in the day when Tiny Whoops hit the market the average weight was around 21-22g with brushed motors and 31mm props. It's crazy to think in just a few years we can…

Downloads
464
Likes
70
Rating
5
P
Printablesquibeck

Mini Whistle GUARANTEED +120dB, ~1g – Tested with dB App

This Mini Whistle weighs in at just ~1 gram yet delivers a genuinely deafening 115 dB , verified using a decibel measuring app (as shown in the test screenshot). Small enough to disappear in your pocket or on a keyring, it's a functional…

Downloads
435
Likes
31
Rating
5
P
PrintablesDino

NobSound NS-01G Pro Amplifier Mount

Nobsound Amplifier Holder with a mount pattern that fits 8020 compatible extrusion popular with Sim Racers. Will hold the amplifier vertically on any 8020 extrusion Designed to use M6 countersunk bolts Bolt spacing is 1.5" apart

Downloads
332
Likes
24
Rating
0
P
Printablesteeeeeee

Apple Pencil (1gen) sleeve

Sleeve for first generation Apple Pencil, because it's too slippery to hold and will roll off tables when not held. Print instructions Tolerances need to be really tight because Apple has made the pencil surface near-frictionless. Print a…

Downloads
320
Likes
64
Rating
4
P
Printablesaschmitz

Rack Shelf for CRS305-1G-4S+IN

A small shelf designed to hold the MikroTik CRS305-1G-4S+IN switch in place and connect to a server rack. There are small pegs to hold the switch in place: it is a somewhat tight fit, but the switch can be set atop the pegs and slid…

Downloads
319
Likes
21
Rating
5

Measure spoon 1g

Miarka do suplementów około 1g wagi w zależności od produktu.

Downloads
286
Likes
12
Rating
5
P
Printablesmmgg

Tiny Purge Line Remover Tool (1g)

Instead of a big scraper you only use for scrape lines, try this tiny purge line remover tool to save your fingers and time. It is an extremely quick print with no supports needed and has a sharp enough edge to separate the purge line…

Downloads
281
Likes
25
Rating
5
P
PrintablesRygar1432

Brushless WHOOP 65mm 24g or 64mm 21g!

Tired of the same old whoop frames breaking? Whatever your poison 1s or 2s, this should fit the bill. Yet Another rendition of my past designs. An actual whoop 64mm size with 31mm props and the latest brushless motors along with all the…

Downloads
264
Likes
36
Rating
0
P
PrintablesWalter Layher

Modular 10 Inch Server Rack - Mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+

These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…

Downloads
229
Likes
25
Rating
0
P
PrintablesWavz3D

Quick Bed Leveling - Under 1g!

Quick print to test the bed level for the main modes. - NO Brim/Skirt Needed! SINGLE PRINT SPEED VERSION WILL WORK ON ANY 300x300mm bed! MODE Prints for Sovol SV04: SPEED VERSIONS MODES NOW OUT : Copy Mode Mirror Mode (Max Bed) Dual Color…

Downloads
222
Likes
12
Rating
5
P
Printablesbunnyology

Sugar Portioner (1g)

For "cocking engineers", who need a perfect amount of sugar or salt. I designed the sugar dispensers for the right sweetness in my morning coffee (while a salt dispenser came out just as a by-product, resulted from a mis-calculation of…

Downloads
207
Likes
39
Rating
4
P
PrintablesMonkeybone91

1g Aquarium Moos/Plant wall mount (+multiple holder)

A simple 1 gram wall mount for moos or some other aquarium plants. It's fastened via a common suction cup and a cable tie. For those who are interessted, the moos in the picture is “Christmas Moos - Vesicularia montagnei”. EDIT…

Downloads
206
Likes
80
Rating
5
P
PrintablesQubiki 3D

Christmas ornament VASE MODE- NO SUPPORT only 21g

I made this Christmas Ornament for my Christmass tree :). It's pretty easy to print. And sturdy Just use Vase mode. I was printing in on 0.2 layer. You can use brim to hold it better to the build plate Also I uploaded newer version of…

Downloads
204
Likes
50
Rating
5
P
Printableskilpatds

Quick-Release windshield mount for the V1G2 radar detector

An adjustable quick-release mount for the Valentine One Gen 2 radar detector. Uses magnets to handle the quick release aspect: you have to rotate it out to get it out. Inspired by the DS1 mount (https://www.rdforum.org/threads/113691/),…

Downloads
203
Likes
18
Rating
0
P
PrintablesPavel

Tiny Whoop frame - 1S - 31g AUW

This whoop is based on Rygar1432's idea, but i designed the model from scratch. FC is secured by the (included) rubber spacers on a separate nylon screws. This reduced a lot of noise coming from the motors into the FC and increased flight…

Downloads
187
Likes
35
Rating
5
P
PrintablesLush

Parametric Rugged Box with Handle EEVBlog 121GW Multimeter Digits Edition

Printed in PLA on Ender3V2. Tried to print with PETG, but the digits did not stick reliably on the print bed. For the lid, select NO to fix wrong scale and YES to load in group.

Downloads
187
Likes
31
Rating
5
P

MikroTik CRS305-1G-4S+IN 10-inch Rack Mount

A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…

Downloads
185
Likes
21
Rating
0
P
PrintablesMatthew Korsmo

Samla 1Gal/5L Internal Volume CAD files

Step and Fusion 360 files that model the internal volume of a 1 Gallon/5L Ikea Samla storage bin - use them to create your own organizational designs.

Downloads
174
Likes
16
Rating
5
P

MikroTik CRS305-1G-4S+IN 19-inch Modular Rack Mount

A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…

Downloads
172
Likes
14
Rating
0
P
PrintablesTim Collier

Mounting Bracket for Nobsound NS-01G Amp - 40 Series

Was recently introduced to an alternate bass shaker setup for my 8040 simracing rig. Using the Nobsound NS-01G two-channel amp along with the Dayton Audio BST-1 Bass Shaker, you can get tactile feedback when gaming. Attaching the shaker…

Downloads
170
Likes
7
Rating
0

Inner Bone Lattice Structure by 1geos remix

A large kelvin structure matrix to print as a demonstration. It is possible, when using extreme pla from 3dmax, to support a 300lb person standing on this thin matrix, the inherent strength of the design is such. Category: Biology

Downloads
162
Likes
14
Rating
0
P
PrintablesWalter Layher

Modular 10 Inch Server Rack - Mounts for MikroTik hAP ax³ and CRS310-1G-5S-4S+

I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…

Downloads
154
Likes
13
Rating
5
P
PrintablesM1DST

M1GEO Wellgood Loop Bias Tee Enclosure

Holds the bias tee PCB securely to stop any potential shorts or damage during use. Has a 5mm hole in the lid to allow DC cable to be fed in. https://www.george-smart.co.uk/projects/wellgood-loop/

Downloads
152
Likes
2
Rating
0
P
PrintablesJurloo

Backrest Handwheel (Golf 4) 1J0.881.671G

This handwheel is suitable for the seat adjustment of the Golf 4 and probably for other car models of the volkswagen group. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Lines…

Downloads
126
Likes
23
Rating
5
P
PrintablesRoss

MikroTik CRS305-1G-4S+IN Mount

Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…

Downloads
125
Likes
4
Rating
5
P
PrintablesByte Insight

Nobsound NS-01G Pro Amplifier Mount

Nobsound Amplifier Holder with a mount pattern that fits 8040 Bosch Rexroth compatible extrusion popular with Sim Racers. Will hold the amplifier in position bolted to the side of a sim racing rig or anything to be honest.

Downloads
109
Likes
7
Rating
0
P
PrintablesHobbydrucker

wallmount Makita JV001G XGT 40 V jigsaw - Wandhalterung Stichsäge

Wandhalterung für eine Makita 40 V Stichsäge, das Maß funktioniert mit der Schutzhülle auf dem Sägefuß. Ich habe eine Version mit einer kürzeren Aufnahme hinzugefügt, um den Weg für das Einstecken der Stichsäge von oben zu begrenzen.

Downloads
109
Likes
10
Rating
0
P
Printablesiblowatsports

Nobsound NS-01G Pro Playseat Challenge Mount

Nobsound NS-01G Pro Amplifier mount designed to clamp onto the playseat challenge tubes (25mm diameter)

Downloads
95
Likes
6
Rating
0
P
PrintablesMarin

Singer 431G Thread Tension Indicator Cup

If these parts are missing or are damaged, I tried to design my own and 3D print them. Singer spare part no. #44879-482 Tension Spring Cup is composed of two parts: 0-9 dial file, where corresponding number label 0123456789.lbx need to be…

Downloads
94
Likes
10
Rating
0
P
PrintablesMarin

Singer 431G Sewing Machine Feet

It is not unusual to come across an old Singer sewing machine, such as Slant-O-Matic, Futura and many other models without or with damaged feet. A slotted screw holds this foot in place. This screw notch can sometimes be razor sharp and…

Downloads
88
Likes
8
Rating
0
P
PrintablesBen

VIFLY/other strobe mount for DJI/other drones (under 1g for 250g drone laws)

A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…

Downloads
77
Likes
10
Rating
5
P
PrintablesZSPrint

VW LT Speedometer pinion 281957821G

VW LT Speedometer pinion 281957821G (Z=18) Designed but never used! Print and use in car on your own risk! Also if you scale up it looks good as an ornament on a desk.

Downloads
74
Likes
3
Rating
0
P
PrintablesXeaL

Darmoshark M3s Varun v47 - 11g shell

Total weight around 29-31g. Print using "lines" support and 20% infill.

Downloads
74
Likes
1
Rating
0
P
Printablesares0

Kia Ceed 1G (ED) hood seal plugs

Printed with TPU to replace the rotten original.

Downloads
74
Likes
13
Rating
5
P
Printablesredaeq

Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia)

Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia pipes) This is a remix of… https://www.thingiverse.com/christhorn/designs just added a mount for the plastic shelves…

Downloads
73
Likes
6
Rating
0
P
PrintablesTill

Minimalistic Photo Stand, only 1g

I wanted to design a Polaroid stand that would be as easy to print as possible and using little filament. It works surprisingly well and is also rather understated visually, which I really appreciate in this case. // Ich wollte einen…

Downloads
71
Likes
23
Rating
3
P
PrintablesCubicle

Nobsound NS-01G Pro Mount

A simple mounting bracket for the Nobsound NS-01G Pro USB amplifier. Use two M5 button head screws and some hammer head nuts to mount this to a T slot profile. I printed this on a Bambu Lab P1P with 0.2mm layer height in PLA. It's a snug…

Downloads
70
Likes
6
Rating
0
P
PrintablesMr. Hrundeel

10" inch rack shelf for server/PC Qotom series Q203* in New design (for example Qotom Q20331G9)

Shelf for home server series Qotom Q203* in New design (for example Qotom Q20331G9). ! Check your stand carefully before printing - tray width 228mm! For wide stands! I just received a new Qotom Q20331G9 server for my home lab. The width…

Downloads
61
Likes
7
Rating
0
P
PrintablesKK20100KK

Cooling fan for HFT McGraw 21G air compressor

The fan fits perfectly on Harbor freight tools 21 gallons Mc Graw compressor. Print with PETG 100% infill and reverse it 180 deg. on the print bed so the hole is facing down to minimize supports needed. Hope this could help someone

Downloads
59
Likes
4
Rating
0
P
Printableskn100

FLY ADXL345 Bed Mount (less than 1G of plastic)

A model that provides a stable, sturdy, and completely reversible mount for your ADXL345 for input shaper calibration. Requires two M2x4mm screws. Print the model, but when it concludes keep your bed heated Screw ADXL345 into the mount…

Downloads
57
Likes
10
Rating
0
P
Printablesbevo_baker

Oregon Duck B1G Logos

Oregon Duck B1G Logos

Downloads
57
Likes
1
Rating
0
P
Printableswebmoon

Drying spool adapter- Sencor SFD 851GR

Adapter designed for Sencor SFD 851GR to allow spools of filaments to dry without having to destroy the original drying sheets. PETG printing was more stable, with ABS the layers began to separate after a few dryings. Print Settings…

Downloads
56
Likes
2
Rating
0
P
PrintablesDan

2in1 USB Port Cleaner, Earbud Cleaner (<1g, 4min print!)

A 2in1 Mini Cleaning Tool for USB Ports, Earbuds, or anything small. Measurements: 13x59x1mm

Downloads
55
Likes
6
Rating
5
P
PrintablesDaveStruve

Nobsound NS-01G Mini Amplifier Sim Racing 8020 Mount

This is a 3d printed Nobsound NS-01G Mini Amp Mount. The holder is designed to work with the Nobsound model# NS-01G mini amp, which is a highly recommended inexpensive amp for powering transducers for sim racing. It may also work with…

Downloads
52
Likes
2
Rating
0
P
PrintablesRelixtayCZ
Downloads
50
Likes
4
Rating
0
P
PrintablesDucks

Porsche 911G Fibreglass Bumper Brackets

If you want to mount a fibreglass bumper on an 911 G body they usually come without any mounting brackets. The brackets are made so you can use the original mounting points on the car. The front center brackets need a speed nut and a M4…

Downloads
48
Likes
9
Rating
0
P
PrintablesStany

Lightweight adapter V2 - AAA to AA - 11g down

This adapter will help to reduce your mouse weight. I recommend useing lithium battery with this mod to lower weight as much as possible. Adapter holds on battery pretty well ;) There is v2 model now. weight: (material PETG) AA alkaline…

Downloads
48
Likes
5
Rating
0
P
PrintablesJohn L.

Ryobi 1gal/3gal Vacuum Nozzle with slot for airflow.

I use a Ryobi vacuum in my sewing and crafting room, every time I was using the the original model it was lifting my cutting mat as well as pulling my ironing board due to it having no way for air to enter the vacuum when place flat as it…

Downloads
45
Likes
7
Rating
5
P
PrintablesCharizardboy

SnapSlice Mini V2 | 2.31g Ultra-Fast Box Opener

SnapSlice Mini V2 is a tiny, lightweight print-in-place box opener designed to be quick and convenient to print. At just 2.31 grams, it uses very little filament and can be printed in under 8 minutes. Features: ⚖ Only 2.31 g ⏱ Under…

Downloads
43
Likes
5
Rating
0
P
PrintablesMspec

4G63 Oil Funnel - 1G 2G DSM - EVO 1-3

I made a funnel for my evo, works great. I printed it in PETG, 4 walls, 10% infill.

Downloads
42
Likes
1
Rating
0
P
PrintablesRübenprint

Adapter Makita CL001G

Adapter for the click mechanism from the makita CL001G and all models with the same machanism. I think nearly all of them have the same mechanism.

Downloads
42
Likes
5
Rating
0
P

MikroTik CRS305-1G-4S+IN 6-inch Rack Mount

A 6-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…

Downloads
41
Likes
4
Rating
0
P
PrintablesAj
Downloads
41
Likes
4
Rating
0
P
PrintablesJeff Yates
Downloads
40
Likes
4
Rating
0
P
PrintablesMufFiNzS

DSM 1G front end Bushings

To be made of Tpu 95a with 100% infill Corvers control arms Sway bar Subframe all 8 of them Please note. it uses all the stock metal pins out of the rubber bushings i used fire to burn them free. Power steering is bushings are a remix…

Downloads
40
Likes
2
Rating
0
P
PrintablesANTALIFE

EEVblog 121GW Holder/Bracket

Saw that 121GW has a little hook at back of case, so decided to make a wall-mounted holder Made in SolidWorks 2017, file attached as always UPDATE: v1.0c, added a chamfer to front faces to make alignment easier

Downloads
40
Likes
11
Rating
0
P
Printablesmartintanecek

MikroTik RB951G-2HnD 10" Rack panel

10" Rack panel for MikroTik RB951G-2HnD

Downloads
39
Likes
1
Rating
0
P
PrintablesAstroNzo

EBM K1G175-CF33-06 Fan Adapter 150mm Aluminum Tube

EBM K1G175-CF33-06 Fan Adapter 150mm Aluminum Tube

Downloads
37
Likes
7
Rating
0
P
PrintablesSyllogy

BLR-1G Battlemaster for Battletech | Syllogy

BLR-1G Battlemaster for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…

Downloads
36
Likes
1
Rating
0
P
PrintablesFynlas

The Less than 1g filament clip

I wanted a filament clip that could fit all spools, didn't get in the way of stacking my spools, and allowed me to finish my last few centimeters of filament. So I modeled this minimalist model, quick to print and consuming less than one…

Downloads
36
Likes
13
Rating
3
P
PrintablesShashi Karanth

Chassis and Servo mount for 21g servo

I wanted to use the 21G servo which I had lying around. This provides faster steering movement Need to print both mount and chassis for https://www.aliexpress.com/item/1005005053639506.html Below are the dimension for the servo

Downloads
34
Likes
8
Rating
0
P
PrintablesIroesStrongarm

Underware - Unifi Flex 1G Switch Mount

This mount is designed to be used either with Underware, or multiboard, to mount your Unifi 1G Switch.

Downloads
34
Likes
2
Rating
0
P
PrintablesAlldot

Sencor SFD 851GR Spare Drying Tray & Spacer For Filament

This Sencor SFD 851GR Spare Drying Tray contains two parts, so you can use just the frame and make a space for filament with it. The model is bigger, so you will need bigger printer.

Downloads
33
Likes
7
Rating
0
P
Printablesidlegravity

Huepar Box-1G Laser Level Slimline Case

Slim, protective case for the Huepar Box-1G self-leveling laser. The case that came with the laser took up too much space in my toolbox so I made something a little better for my needs. I designed it to be printed in TPU but other…

Downloads
33
Likes
0
Rating
0
P
PrintablesMayhem Makes

ESRack module for MikroTik CS305-1G-4S+IN

Description ESRack is a very good modular rack mount system created by @EvilProphet . I created a module for the MikroTik CR305-1G-4S+IN from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…

Downloads
32
Likes
5
Rating
0

Nobsound NS-01G Mount

Printed at 0.2mm, 4 wall and 40% infill

Downloads
32
Likes
3
Rating
0
P
PrintablesMagig_I3Prusa

1Gr Herz Tier Anhänger BLENDFile

A Costimizable TAG fpr all USE CLEAR Heart in the Blend and Text for simple NAME and Branding feel Free to use your own Stuff on the CLEAR

Downloads
31
Likes
3
Rating
0
P
Printablesrunarsand

Rack Shelf for CRS305-1G-4S+IN (Shortened and mirrored

Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.

Downloads
30
Likes
1
Rating
0
P
Printablesprint.me!

tough self locking flexible zip tie - only 1g of filament

tried coming up with my own zip tie design - pull the tail through the bottom hole and latch it - tuck in the leftover through the top to secure it - pull on the tab up top to help release the material it's very strong but also difficult…

Downloads
29
Likes
6
Rating
0
P
PrintablesMarin

Singer 431G Length Stitch Lever Knob

In the past time, I saw several Singer 431G Slant-O-Matic sewing machines on auction sites missing Length stich lever knob. I have bought myself a such one, a friend of mine too. The same lever is on following Singer machines: 401, 402,…

Downloads
28
Likes
1
Rating
0
Downloads
27
Likes
4
Rating
4
P
PrintablesSuperWilli

Convoy S21G Rugged Box

Simple box design for your Convoy S21G, there is enough play to store the light with the tailcap ½ turn unscrewed to protect the battery in case you are using a backlit switch. You will need 3x M3x20 Screws. I recommend printing the box,…

Downloads
27
Likes
4
Rating
0
P
PrintablesCartridge

Gridfinity Pritt Glue Holder (11g)

Holder for one stick of Pritt Glue (11g). Should fit any Glue stick with a diameter of ~20mm.

Downloads
26
Likes
4
Rating
0
P

IT 502 | UK 1Gang back box

SIngle gang UK Box with holes for 20 and 25mm corrugated tubes to bring in cables, and M3.5 sockets to wall mount, plus the M3.5 sockets to screw in the front plate. This is my first design I ever create as I learn Fusion 360, and any…

Downloads
26
Likes
1
Rating
0
P
Printablesampirra

2 inch Net Cup - 11g

Clean, support-free 2” net cup optimized for fast prints (only 11g). Perfect fit for mason jar hydroponics, kratky setups, and small indoor grows. Simple, reliable, and ready to use straight off the printer.

Downloads
26
Likes
4
Rating
0
P
Printables3_Dave
Downloads
25
Likes
16
Rating
5
P
Printablesdbrain

Bestway Shade Pool 2.4m 561GA(~) T Connector (120) and Foot

This is a chunky version of a T connector for a Bestway Shade Pool and earlier versions, the kind you can purchase from Kmart (Australia) etc. there is also a model for a foot replacement but I'm mostly focused on the T connector in my…

Downloads
24
Likes
1
Rating
0
P
PrintablesSyllogy

BLR-1GHE Battlemaster Hellslinger for Battletech | Syllogy

BLR-1GHE Battlemaster Hellslinger for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included…

Downloads
24
Likes
0
Rating
0
P
PrintablesAnHe

box for Huepar B011G cross line laser / Huepar B011G Kreuzlinienlaser Aufbewahrung

box for Huepar B011G cross line laser with space for spare batteries Huepar B011G Kreuzlinienlaser Aufbewahrung mit Platz für Ersatzbatterien material: 3DJAKE TPU A95 nozzle: 0.6 / layer height: 0.3 / infill: 15% no support needed lid and…

Downloads
24
Likes
2
Rating
0
P
Printablesctheroux

P4.75-1R1G-16S Led Matrix Stand

This is a set of feet for the p4.75-1R1G-16S Led Matrix (32 x 64). It holds the display at a 30-degrees angle. You will need two 8mm M3 screws to attach the feet to the display. No support is needed. This object main web page is:…

Downloads
24
Likes
3
Rating
0
P
PrintablesHobbydrucker

Wallmount Makita HP001G 40 V Akkuschlagschrauber

Wallmount Makita HP001G 40 V Akkuschlagschrauber

Downloads
23
Likes
5
Rating
0
P
Printablesacidburn4321

1" Square Tube Cap 11GA (.119)

1" Square Tube Cap 11GA (.119)

Downloads
22
Likes
4
Rating
0
P
PrintablesMichael

Fortigate 91G rack ears

I needed to mount a new Fortigate 91G in a network rack but it didn't come with ears. I printed mine using PLA on a diagonal (lots of supports) for extra angular strength since the firewall was twisting the ears a bit. Screw holes line up…

Downloads
22
Likes
0
Rating
0
P
PrintablesHobbydrucker

AEG Staubsauger Adapter für Makita Stichsäge VJ001G

Staubsaugeradapter, um die Makita Stichsäge JV001G an ein Staubsaugerrohr mit 35 mm Durchmesser anzuschließen.

Downloads
21
Likes
3
Rating
3
P
PrintablesJ_mason555

Bott square peg board loctite 1g glue holder

Loctite glue holder for bott square peg board

Downloads
21
Likes
13
Rating
5
P
PrintablesMaking Changes

Mini 1g CA (Super) Glue cap coupler

i like these tiny 1g super glue tubes https://amzn.to/3RagIjm for edc, tool boxes, bags, and first-aid kits etc but the caps normally have to be stored separately as they puncture the tube for usage

Downloads
21
Likes
2
Rating
0
P
Printablesgotgraham

W1GHZ dual-band offset feed mount for DirectTV slimline dish

This is a mount for the W1GHZ dual band 10/24GHz feed that is designed to fit the DirectTV slimline dish. It is the same angle and position as the original DirectTV LNB, so your feed will be at the focal point of the dish. It attaches…

Downloads
21
Likes
1
Rating
0
P
PrintablesFrederik

SONOFF MINI-ZB1GP - DIN Rail case

DIN Rail Case for the SONOFF MINI-ZB1GP

Downloads
20
Likes
4
Rating
0
P
PrintablesJgary

Shopping Cart Token Keychain – 1g, 10-Minute Print

🛒 Shopping Cart Token Keychain Never search for a coin when you need a shopping cart again! This small and practical 3D-printable token is designed to unlock compatible shopping carts without leaving a coin inside. Simply insert the red…

Downloads
20
Likes
7
Rating
0
P
PrintablesŽan Rudolf

1GB Plymouth Laser/ Eagle Talon/ Mitsubishi eclipse Side marker light clip MB596509

1GB Plymouth Laser/ Eagle Talon/ Mitsubishi eclipse Side marker light clip MB596509. I recommend printing on resin printer. Might need some sanding. It is exact copy of original.

Downloads
19
Likes
2
Rating
0
P
PrintablesMarcell B

Mikrotik CRS305-1G-4S+IN 19-inch Rack Mount

MikroTik CRS305 Dual Rackmount — 1U, 19", LEDs Front, Fan-Ready Mounts two MikroTik CRS305-1G-4S+ switches side by side in 1U of a standard 19" rack. Most CRS305 rackmounts turn the switch around so the SFP+ cages face front — convenient…

Downloads
19
Likes
2
Rating
0
P
PrintablesMickapouel

summit1g's head

Printing tips: Slightly tilt the head back and add support material near the base, headphone and the back of the head (where the cap starts) Original design by LAMO

Downloads
19
Likes
7
Rating
0
P
Printablesgtg tgtgt

Universal Small Doorstop (1g)

mount with double sided tape or glue. print with supports on build plate only.

Downloads
18
Likes
3
Rating
0
P
PrintablesCody Reichert

Kaizuo 21g Glue Stick | Gridfinity storage bin

This Gridfinity storage bin is designed to hold 5x 21g Kaizuo Glue Sticks from Aliexpress. Other brands will most likely fit ( except Elmer's 22g glue stick, which you can find a bin for here ). The diameter of the 5 holes is 26mm. Base…

Downloads
18
Likes
4
Rating
0
P
PrintablesMaurits

Simple holder for Vonets VAP11G WIFI repeater

A simple holder I designed to attach a Vonets WIFI repeater to my Jubliee printer. It is a snug fit so the Vonets won't fall out, even if you mount it upside down. Screw holes are designed to accomodate a small flathead bolt as shown in…

Downloads
17
Likes
0
Rating
0
P
PrintablesROK

Quick filament sample collet clip (1g material)

Very quick to print filament sample card that can be directly used as a bowden-tube coupler clip. Has a small area for important notes. Attached files for PLA PETG TPU+PETG with filament change (TPU first, then PETG) (layer for filament…

Downloads
17
Likes
2
Rating
5