Qidi plus 4 - Display tilt adapter (20deg)
Adapter to increase the display angle by 20deg
- Downloads
- 646
- Likes
- 94
- Rating
- 4.9
24 models
Adapter to increase the display angle by 20deg
This bracket will mount Rough Country LED Rock Light on the roof rack with a 20-degree angle. work perfectly as a camping light. Required hardware : M4 Bolt (12mm or longer ) M4 Nut M6 Bolt and nut (depend on your setup) Category:…
I needed a keyboard holder for my secondary keyboard on my cockpit. After the first try I shifted it by 20deg towards me. It's designed to be mounted 25cm-s from each other (measured from the right side of both pieces). It's designed for…
20deg tilt + crest + antenna holder
Designed to be a simple and portable 120deg antenna for noaa satellite use. This antenna uses tape measure elements and should fit any pipe or stick smaller than 33.5mm (1 in pvc) by using longer screws. Category: Electronics
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
The iFlight baby Nazgul (both 63 and 73) has a very aggressive camera angle, around 40 degree. I designed a lower angle for this drone which should be closer to 25 degree. It fit both drones.
Remixed from @Krhom's frontend to change the tilt to 20°
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Hero 8 black mount for the Demibot with some durability improvements
This is a GoPro session (4/5), RunCam Orange 5 or Caddx Orca mount out of TPU for IFlight Nazgul. This is remix from https://www.thingiverse.com/thing:3103320 - correct hole spacing added Print Settings Printer Brand: Creality Printer:…
My doorbell is mounted to my siding (8-10deg angle). I wanted my doorbell camera to look down at my porch more to keep any eye on packages and reduce the overall blind spot. I decided to make this extreme 20deg angle mount because a 10deg…
I was quite surprised how few of this 120 degrees connectors is available to download, for 3030 it was none, so here one is :) I printed it from pla (as i think it is not that bendable as petg), 0,25 structural, 5 perimeters 5 top and…
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once.. UPDATE: Final…
No supports needed. I printed with PLA+
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
This part is associated with Voron purely because it came from the Voron Mods Database, with the original by quattroerik. I was looking for a pretty much “print and use” style hinge for 2020 extrusion and this one was as close to perfect…
These are 2 Adapters for connecting BlenderBottle ProStak Shakers or Extensions with 720Dregree Shakers and Extensions and and vice versa. Print Option: PLA 100% Infill If you have any questions, feel free to ask.
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
Hirsch / Identiv Card Reader 1 Inch Back Plate ( CCD version-9t_20deg ) Had an instance where I needed to mount on a concrete surface nearly as flush as possible. This version has a 20 degree upward to make viewing and using the reader…