Search results: 30x

Sort order

584 models

Ring Box 30x30mm

Das ist eine kleine wunderschöne Ring Box für Verliebte, Valentinstag, Verlobung oder für Hochzeit mit Herzlogo und verdeckter Innenscharnier. Sehr praktisch auch für Hosentasche oder kleine Handtasche zum mitnehmen. Für Lovers ein…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
20
Rating
0
P
PrintablesSknown

Snap on Hanging Hook for 30x30mm T-slot(8mm) Aluminum box frame

Single hook fits aluminum frames with a 30 x 30 mm, 8 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
12
Rating
5
P
PrintablesMartinD

Doorstop D30x25 - Floormount

Stops the door and protects your wall. Hole 5,5 mm for screw. Size: D30x25

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
68
Likes
4
Rating
5
P
PrintablesSknown

Test Lead Holder for 30x30mm T-slot(8mm) Aluminum box frame

The test lead folders on the market are for general use and have only screw holes. Since there are no test lead folders on the market that fit the T-slot of the aluminum frame stand, I made one. This version of the test lead folder fits…

Print approx. €5.58–€6.82 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
3
Rating
0
P
PrintablesAndreasS

Stapelbare Box 205x130x54mm

Verschiedene stapelbare Boxen

Print approx. €6.92–€8.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
0
Rating
0
P
PrintablesMikyner

Shelf for spices (Cooker hood BEKO CWB6730X)

Shelf for spices (Cooker hood BEKO CWB6730X)

Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
4
Rating
0
P
PrintablesRaziel

Moon at 55% of original to print at 30x30x30 printer

New cover for 12mm RGBW LEDs and space to mount an ESP32 to control with WLED

Downloads
1,612
Likes
470
Rating
0

Lift Table 130x100

There are no details here except those that you can print yourself. Supports should only be set when printing Base_gr and Base_top, the overhang angle of the support is 82 degrees, so that the support is not printed in the holes,…

Downloads
1,335
Likes
357
Rating
4.71
P
PrintablesEmbrace Making

EM Calibration Cube (30x30x30)

A calibration cube inspired by my logo with features such as overhangs, 45/90 corners, bridges, clearances, support material, text, etc. Several models available for the various clearances clearly marked with text at the top of the part.…

Downloads
1,218
Likes
42
Rating
5

PRUSA CALIBRATION CUBE 30x30

Hi! I have a Prusa 30x30 calibration cube for you. By printing this torture test, you can verify that your printer prints bridges, holes, and overhangs correctly and that it holds all dimensions correctly. In the photos you will find a…

Downloads
1,202
Likes
48
Rating
4.89
P
Printableswhilex

Rugged Box 80x30x140mm

a rugged box, enjoy. Use 2mm spokes as hinges. Used BumpMesh by CNC Kitchen for texturing https://bumpmesh.com/

Downloads
1,169
Likes
652
Rating
5
P
PrintablesBoogie

30x30x30 mm cube

30x30x30 mm cube

Downloads
1,077
Likes
14
Rating
4.83
P
PrintablesReDevil75
Downloads
1,056
Likes
7
Rating
5
P
PrintablesAH - X1C

T-slot nut for Prusa MK4 and I3 MK3S and Prusa Mini 30x30 profile

T-slot Nut for 30x30 Prusa MK4 or I3 MK3S profile - Saves dismantling the frame. Integrated M3 nut. Recommended Print:- PETG Layer height 0.2 30% infill Vertical shells perimeters 3. Fusion CAD file included for you to modify and make…

Downloads
835
Likes
120
Rating
5

Danfoss RA-N to M30x1.5 Radiator Adapter

Just a warning, the tolerances on RA-N valves are pretty bad, so this might not fit you valve without some modifications, i designed it to fit my own. I made it because the one included in the shelly trv is badly designed. Print left,…

Downloads
820
Likes
44
Rating
4.88
P
Printableswakareva

modified case for raspberry pi 4 with camera pi + GPIO pins + 30x30 mm fan

I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…

Downloads
779
Likes
60
Rating
4.71
P
PrintablesOuliere

Box 130x165x65 mm

Box 130x165x65 mm

Downloads
778
Likes
76
Rating
5
P
Printablesmariusbach

G2E (Galileo 2) cover for Canbus PCB (SB2040, SB2209 and similar) and 30x30 (3010 or 3007) fan

In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…

Downloads
739
Likes
92
Rating
4.8
P
Printablescmenard

30x30 to 20x20 Flight Controller adapter

This is a 30.5mm to 20mm FC adapter. The 20mm mounting uses 2mm screws and can be tapped as is. Fits my Xrotor nano stack perfectly! Category: R/C Vehicles

Downloads
718
Likes
14
Rating
5
P
PrintablesAndys1957

Open Cable Chain with Clip 30x40x20mm

Update 16.4.23: Step-Files uploaded Open Cable Chain with Clip 30x40x20mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories

Downloads
613
Likes
31
Rating
5
P
Printablesjosepilar

DJI O3 Air Unit Cage 20x20 and 30x30 adaptor

Didn't like the idea of removing screws to mount the O3 air unit into a tpu mount adapter so I designed this case for the unit to sit on, it has 20x20mm and 30x30mm mounting holes, a channel to run wires under and a couple of braces that…

Downloads
588
Likes
30
Rating
0
P
PrintablesJendam99

Radiator valve knob - M30x1,5

Simple knob for radiotar valve with outer thread M30x1,5. On the inside top there is a recess with diameter of 20 mm and depth about 1 mm. This recess is intended for a flat piece of steel or any hard material to be placed so as to…

Downloads
462
Likes
31
Rating
5
P
PrintablesHarry

M30x1.5 adapter for Netatmo radiator thermostat

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Downloads
452
Likes
17
Rating
5

Cable clip for profile 30x30 mm

it's useful for organize cables in the frame profile

Downloads
447
Likes
70
Rating
5
P
PrintablesFilarte3D

Raspberry Pi 3B Case for 30x30mm Fan

Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case remix for a 30x30mm fan.

Downloads
442
Likes
33
Rating
5
P
PrintablesAlexM

Large LEGO box (230x230x150mm)

This is a remake of Wivry's box. Size chosen to fully utilize the available Bambu P1P plate size. (For utilizing the full 256x256 plate size, see instructions ) Height was chosen to coincide the official LEGO box height (150mm) You can…

Downloads
422
Likes
66
Rating
5
P
PrintablesSerge Nader

eppendorf/cuvette/vial holder (10x, 30x)

Comes in handy when freezing multiple samples in liquid nitrogen. For an alternative design, please check this model: https://www.printables.com/model/1326290-eppendorf-cuvette-vial-holder-10x-25x

Downloads
415
Likes
42
Rating
5

Base 30x60. Old World

New 30x60 base for Old World

Downloads
399
Likes
10
Rating
0
P
Printablesecsv

Temset valve to M30x1.5 thermostat adapter

The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…

Downloads
382
Likes
9
Rating
0
P
Printablesscubam@xx

T-nut M3 drop-in rotating for 30x30 Alu Extrusion (Prusa MK3/MK3S/MK3S+)

T-nut for 30x30 V-Slot aluminum extrusion like PRUSA MK3S (8 mm gap) compliant with M3 nut. I used them to install the Rubber Feet Support for Prusa MK3 by Volan on the PRUSA MK3S If you like it, plz post a make :) Print Settings Rafts:…

Downloads
374
Likes
78
Rating
5
P
Printableskwik

calibration cubes xyz (20x20, 30x30, 40x40, 50x50)

Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.

Downloads
368
Likes
9
Rating
5
P
PrintablesBastR

Nintendo Switch Game Card Book Holder 30x with logo (multimaterial)

The original model is so good, I thought it was missing a little something on the front. I remixed the original design to incorporate the Nintendo Switch logo. Just import the .3mf into your slicer set up in multi-couleurn, I used a…

Downloads
362
Likes
57
Rating
5
P
PrintablesCorradon

Raspberry Pi 4B Clip-on Fan Mount 30x30

Background: So i built a voron, it uses a raspberry pi 4 as computational power for Klipper. RPI4B gets hot when not cooled actively, thus, i came up with a clip-on design that printed in one piece and let me just smack on a pifan &…

Downloads
360
Likes
36
Rating
5
P
Printables3DGera

Solar panel water drain clip 30x10

This model fits 30 mm panels, 10 mm lip. Measure if this fits.

Downloads
351
Likes
22
Rating
5
P
PrintablesChrisHerman

Corner Protector (30x30x30mm)

Corner protector for metal containers, things on coasters, taking the blow off sharp corners on furniture, etc. 30mm x 30mm x 30mm with 5mm thick sides Category: Household

Downloads
348
Likes
30
Rating
4.67
P
Printablesmmuellerphoto

Cable Channel 20x30, 30x30, 40x30, 50x30 - Different Length

Cable Channel: - 20mm x 30mm, 20mm up to 320mm length in 20mm increments, 20mm Clip - 30mm x 30mm, 20mm up to 320mm length in 20mm increments, 30mm Clip - 40mm x 30mm, 20mm up to 320mm length in 20mm increments, 40mm Clip - 50mm x 30mm,…

Downloads
335
Likes
100
Rating
5
P
Printablestr8

Radiator valve adapter from M34x1.5 (Polytronic valve) to M30x1.5 (standard for most thermostats)

An adapter to use thermostats or smart radiator controllers (like Fritz!Dect301, CometDect and probably others) on radiators with Polytronic valve. Print in PETG or ABS because PLA is not heat resistant enough!

Downloads
334
Likes
11
Rating
5
P
PrintablesPetr Mareček

Alu Profil 30x30

30x30xXX profil tisk s co největší tryskou zkrátí o poznání čas

Downloads
334
Likes
9
Rating
0
P
PrintablesB&B TECH

30x5mm dowel pin

30x5mm dowel pin with glue grooves, If you like my work and want to give a helping hand to keep me going, I ask you please buy me some coffee or a energy drink :D https://ko-fi.com/bbtech Category: Hobby

Downloads
321
Likes
24
Rating
0
P
PrintablesKC

Silica gel container 30x50x9 mm

An easy to print silica gel container. I wanted a small, flat container that would fit narrow spaces in the boxes or in the spools. Printed mine on Creality Ender 3 v2 NEO with PLA .4/.2

Downloads
313
Likes
33
Rating
4.75
P
PrintablesDJ

Festool MFT DIY Corner Stops (20mm) 121x121mm, 217x121mm und 130x130mm (einstellbar)

Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm

Downloads
291
Likes
79
Rating
5
P
PrintablesBoogie

30x30x30 mm cube

30x30x30 mm cube

Downloads
290
Likes
3
Rating
0
P
PrintablesJörg

Stopfen Lamellenstopfen 30x40 Rechteckstopfen

Am besten mit TPU drucken, damit er fester in dem Rohr sitzt.

Downloads
283
Likes
9
Rating
5
P
PrintablesHeikit

Hook Haken 30x30 and 40x40 Bosch Aluminium Profile

It would be nice if you post your make. Thank you

Downloads
275
Likes
34
Rating
0
P
PrintablesMartin_au

Belt guard for X5SA 330x330

Belt guard for X5SA 330x330

Downloads
266
Likes
34
Rating
5
P
Printables93djen

3030 extrusion endcap - 30x30

Fits onto the misumi 3030 extrusions with the 6.8mm hole and 8mm slots. Held by the middle pin and fixed against rotation by the small standoffs.

Downloads
261
Likes
21
Rating
5
P
Printables3D-Printiverse
Downloads
260
Likes
31
Rating
0
P
Printablesfersanhu

Aluminum Extrusions Profiles 20x20 30x30 40x40

diversos modelos todos d e 200mm, si necesitas una longitud diferente no dudes en pedirla.

Downloads
257
Likes
23
Rating
0
P
PrintablesHatchettSystems

TV06 r2.1 - 230x230 SV06 CoreXY Conversion

The Terminal Velocity 06 project is a conversion project aimed at bringing high speeds to SV06 3D printer owners. Originally developed as a branch of the ProosaXY, the TV06 has taken on a fully unique form now as it moves into full…

Downloads
245
Likes
90
Rating
5
P
Printablessale723

Aluminium Profile 30x30x1000(500/400/300/200/100/50)

This are 3D models of a Aluminium Profile. This project was made in Autodesk Inventor 2021. There are different lenghts of profile, and you can choose what lenght you want. If there is a specific length required, pleas contact me and I…

Downloads
243
Likes
19
Rating
5
P
PrintablesTri_Engineer

Cableclip for Aluminium 30x30mm Profiles (ITEM)

There are threee options with different diameters. 12, 10 and 8mm.

Downloads
241
Likes
26
Rating
0
P
PrintablesOtto

Filament spool holder for Elegoo Neptune (and others that use M30x1,5 thread)

Remixed model made by sbonnes to use stock holder tube from Neptune 2* - to save both printing time and material. Also removed holes in legs to save time and made them 1cm longer. Trimmed to flat surface, so you can add rubber pads if…

Downloads
238
Likes
42
Rating
5

Solar Panel Cable Clip for 30x30mm profile

I did not like few solar cable clips that I have tried, so I have designed my own that sits snug, clips over the panel edge, and hides the cable under the solar panel frame. It fits perfectly with HYUNDAI HIE-S440HG G12 which has 1.2mm…

Downloads
231
Likes
43
Rating
5
P
PrintablesPix

Self-Watering Planter 130x130x110mm

Evolution of my older round design: https://www.thingiverse.com/thing:3610004 because my plants grow from my previous design. I have saved some plastic during print, but now the pot is from two parts and you have to superglue them. It's…

Downloads
230
Likes
57
Rating
5
P
PrintablesBoby

Bed level test (nine squares 30x30mm)

Simple test to find out if your bed is level. This STL contains nine squares of 30x30mm each, 0,2mm high. Notice: Slice with 0,20 resolution Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0,2mm…

Downloads
227
Likes
8
Rating
0
P
PrintablesAl

Snaplock 10mm Ammo Box (130x130x25)

I used PLA+ and printed the insert with 2 walls and 10% infill to speed the process up, should be around 4 hours. Insert should be printed face down to prevent need for supports. For the box and clip I used PETG and increased the infill…

Downloads
227
Likes
19
Rating
5
P
Printablesparkis

30x30 alu profile brackets

This is set of simple brackets to join 30x30mm aluminium extrusion profiles with 8mm slot (i bought mine on http://ehlinik.cz ). Except corner bracket all printable without supports. Print corner bracket in orientation provided in stl for…

Downloads
216
Likes
26
Rating
5
P
PrintablesLennnard

Thermostat Adapter - Vaillant Circo to M30x1.5

Simply print in the given orientation. Do 4 Perimeters for ultimate strength.

Downloads
215
Likes
13
Rating
5
P
PrintablesYoufu

Flight controller cover 30x30 and 20x20

A thin cover for flight controllers. My frame is very tight and my FC and ESC stack is very tall so I made this cover to stop it from rubbing against the battery strap. both 30x30mm (M3 stack screws) mounting and 20x20mm (M2 stack screws)…

Downloads
212
Likes
7
Rating
0
P
PrintablesBLawl

Multiboard IR temp gun holder (30x40mm open ring holder)

Multiboard is a creation of Jonathan (Keep making). See his entire project at Multiboard.io This uses the push fit connection method in a snap ring. As with all things Multiboard, print at .2mm layer height, 15% infill, and 3 wall…

Downloads
211
Likes
26
Rating
0
P
PrintablesDonJakobo

30x30 to 25x25 adapter

I remixed another mount on thingiverse and adapted this for my needs, removing extra plastic because I wanted simple and slim design to add on an HD-zero whoop 25x25 board onto a 30x30 flight controller stack. Printed this in PLA+ 0.2…

Downloads
211
Likes
6
Rating
0
P
PrintablesJRM

Air grille / Rejilla aire 130x130 mm

Air grille / Rejilla aire 130x130 mm

Downloads
209
Likes
19
Rating
5
P
Printablesdoga

čtverec 30x30x0,2

čtverec pro kalibraci první vrstvy

Downloads
209
Likes
14
Rating
0
P
Printablespulpote

JUEGO.RANA.Y.FICHAS.D30X5

Juego de la rana infantil con 8 fichas, es un juego de precisión de origen egipcio que consiste en meter las fichas en la boca de la rana, gana el que sea capaz de introducir mas fichas en la boca de la rana. Utilizo un PLA color verde…

Downloads
209
Likes
7
Rating
0
P
PrintablesEgorka555

Front wheel Husqvarna Automower 430x

For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…

Downloads
208
Likes
15
Rating
0
P
Printablesps915

DJI F450 bottom plate - Naze32 Mount (30x30)

DJI F450 Bottom plate for mounting FC with 30x30mm mounting holes Thanks to kjamimate Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…

Downloads
203
Likes
11
Rating
0
P
Printablesmaramao

Caddx Vista enclosure DJI FPV 30x30 mount

enclosure for the Caddx Vista that can be additionally secured with m2 nuts and bolts to the mount, meant to be positioned on top of a 30x30 stack feet/spacers height is 3mm, the holes are intentionally a tight fit to keep it in place…

Downloads
198
Likes
14
Rating
0
P
PrintablesMAKERTEAM®

Quad Indoor Grow Pot for mini Grow Box (30x30)

Indoor Grow Pot for mini Grow Box (30x30). Pots will fit stable on base and are reuseable. If the base don't fit on your printer, resize both models with the same value. On Bambu P1P you can scale it down to 90%. Material: PETG or PLA…

Downloads
196
Likes
48
Rating
0
P
PrintablesMichiel Haisma

Floor Heating Valve Knob (M30x1,5)

I needed an additional valve shutoff knob since one of the automatic ones was malfunctioning. Checked the dimensions and designed this knob. Important information for printing: Depending on your tolerances, you will need to scale the…

Downloads
194
Likes
12
Rating
5
P
PrintablesStanley

Logitech C270 arm base for 30x30 aluminum extruded profile

This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%

Downloads
194
Likes
37
Rating
5
P
Printables13lubushby

30x30 Aluminium Extrusion

A 60mm length of 30mm x 30mm aluminium extrusion

Downloads
190
Likes
16
Rating
0
P
PrintablesMarcus

Endcap Aluminium Profile B-Type Slot 8 30x30

Just an other endcap for an 30x30 aluminum profile Print instructions No support No raft Printed with HD-Glass

Downloads
188
Likes
19
Rating
0
P
Printablesabeaulieu

M6 tap hole T-nut for 30x30 or 40x40 slotted extusions

I remixed this nut in order to only have a 5.0mm DIA hole which is then tapped to M6 thread to have a 100% plastic part. If you already have a tap kit available, and don't want any steel in your part, this could be a better option than…

Downloads
183
Likes
14
Rating
3
P
PrintablesStanley

Orange PI PC Case for 30x30 Aluminum profile

This is remix of Orange Pi PC case for 30x30mm extruded aluminum profile. Print instructions Category: Computer Summary This is remix of Orange Pi PC case for 30x30mm extruded aluminum profile.

Downloads
182
Likes
12
Rating
4.33
P
PrintablesHoopy

M3/M4 T-nuts for 30x30 strut profile (Prusa MK3/MK4/XL)

These T-nuts can be used to bolt things to a 30x30 strut profile (as used on the Prusa MK3/MK4/XL). They're also useful for fixing things only temporarily as they don't make scratches on the aluminium profiles.

Downloads
182
Likes
16
Rating
5
P
PrintablesSepp

Endkappe / Fuß für Aluprofil B 30x30 - foot or end cap for type B profiles.

Als Fuß für die 30x30 mm Typ B Schienen. Gedruckt mit TPU - einfach aufstecken und gut is.

Downloads
180
Likes
10
Rating
0

Heizungsadapter M40x1.5 zu M30x1.5

Dies ist eine neue Version der gleichen Idee, die schon von jay1992 gepostet wurde. Der Unterschied besteht darin, dass hier das Gewinde zum Anschrauben an die Heizung länger ist - bei meiner Heizung war das nötig, da sonst kein Grip…

Downloads
176
Likes
4
Rating
0
P
PrintablesVlado Turek

ALU extrusion 30x30 - PARTS

Useful components for using with ALU extrusions 30x30mm. Print instructions You can use PET-G filament for better durability, but PLA also works well.

Downloads
174
Likes
35
Rating
0
P
PrintablesSanco3D

90 Degree Bracket 30x30x30

Shelf bracket in size 30x30x30 Print on the side for better stability. --------------- Regalhalterung in der Größe30x30x30 Auf der Seite drucken für bessere Stabilität. Hit Like, rate and comment!

Downloads
169
Likes
11
Rating
0
P
PrintablesHorcikDesigns

30x20 custom rim for LEGO Technic models

The model has two variants: SINGLE PART - the rim is printed all at once many supports, no assembly needed low accuracy of the axle hole 2 PART - the rim is divided into top and bottom part (shown on photos) assembly with supergule or…

Downloads
167
Likes
33
Rating
0
P
Printablesplanetar

Wasserrad 30x32 - Water Wheel 30x32mm

This part is compatible to the holder models at Water Wheel Holders - Wasserrad - Halter It is a rebuild of Watermill , but smaller in both dimensions at 30 mm radius and 32 mm width. A longer axis is supplied here at 50mm (which works…

Downloads
167
Likes
5
Rating
0
P
PrintablesMarkus

Rack ears 30x30 pattern (some HP and 3COM Switches)

I was looking for rackmount brackets / ears for an old HPE Switch which has a 30 x 30 pattern for M4 screws and all I could find were models with 25 mm distance. After printing a first draft, turns out 29 mm fits even better so I included…

Downloads
166
Likes
17
Rating
5
P
PrintablesSeanTheITGuy

Adapter to fit 20x20 item into 30x30 Stack

Simple thing to allow low profile mounting of a 20x20 flight controller, or other item, into a full size 30.5x30.5 stack. I had several extra Nox F4 flight controllers and several full-stack quads in need of said flight controllers, and…

Downloads
165
Likes
4
Rating
0
P
PrintablesNERDCORNER

simple housing for STC1000-30XX

Find out everything you need to know about the STC controller on my blog: https://nerd-corner.com/stc-3000-with-user-manual/ https://nerd-corner.com/stc-3008-2-temperature-sensors-in-one-device-full-user-guide/ 3D-Model STC3008 from…

Downloads
159
Likes
10
Rating
0
P
PrintablesAuzziebogan26

Corner bracket for 30x30 T-slot

Done in Fusion360 because I could not find them online

Downloads
153
Likes
16
Rating
0
P
PrintablesValscape

3-axis square tube connector 30x30mm

3-axis square tube connector 30x30mm with M4 wood screw hole / Connecteur 3 axes de tube carré 30x30mm avec trous vis M'4. Use for my car's layout structure (camper box) and print in PETG. / Utiliser pour la structure d'aménagement de ma…

Downloads
152
Likes
24
Rating
0
P
PrintablesDaki3D

Kalibrier Würfel / Calabrating cube 50x50x30x1

Der Würfel dient zum Kalibrieren ohne Boden, mit Kanten und Kurven.

Downloads
152
Likes
2
Rating
0
P
PrintablesJosef Baber

M5 T-Nut/Hammermutter for 30x30mm Aluminium Extrusion Profiles/Item

I changed the size for the Nut and the borehole to fit better. I attached a sldprt for solidworks if you want to change any sizes or diameters. Printed with Bambu X1C

Downloads
151
Likes
11
Rating
0
P
Printableslual

End cap for cable duct 30x15mm

Optimized for FDM printing. The retaining clips are unbreakable and have a slightly elastic shape.

Downloads
149
Likes
14
Rating
5
P
PrintablesS1Builder

Modified Rotor 30x10x5mm magnet slots

A remix of Tom Stantons design, but I modified the rotor to fit 30x10 millimeter magnets. There are 16 slots.

Downloads
149
Likes
6
Rating
0

Leveltext 300x300 mm (30x30 cm)

Simple leveling test for 30x30cm Printers. Live-leveling is recommended. Recommended nozzle size is 0.4mm with a layer height of 0.2mm. Attached is a Simplify3D factory file for the CR-10s, use at your own risk. Print Settings Rafts: No…

Downloads
148
Likes
5
Rating
5
P
Printablesnetwalk

Kleiner Trichter, Übergang 30x50mm eckig auf 90mm rund

UPDATE: Am Übergang zum oberen Rand hatte sich ein kleiner Fehler eingeschlichen. Nun ist die korrekte Datei als trichter_rund_reckig_repaired.stl hinterlegt. Ein kleiner Trichter, zum Einfüllen von z.B. Vogelfutter in den Einfüllkamin…

Downloads
148
Likes
7
Rating
0
P
PrintablesLt.Dan_Band

Corner connector 30x30x30mm

Corner connector for multiple purposes with hexagonal holes for M3 nuts.

Downloads
147
Likes
52
Rating
5
P
Printablesderzoelli

XYZ Calibration Cube 30x30x30mm

XYZ Calibration Cube 30x30x30mm

Downloads
145
Likes
15
Rating
0
P
PrintablesHitLuca

Corner connector for acrylic boxes (30x30x30mm)

There's nothing much to say, just a slim corner piece that I created to build an acrylic box. Its sides are 30x30mm

Downloads
145
Likes
27
Rating
0
P
PrintablesVindikkator

Ratrig 500 Quick Bed Level test 7x7sq 430x430mm

Added a beacon and wanted a very quick 1 layer test of the bedmesh. Takes me 6 minutes to print and only 4 g of filament. All squares are connected so easy to pickup off build plate to discard. 430x430mm at 0.3mm layer height, for 500mm…

Downloads
145
Likes
11
Rating
0
P
PrintablesW1cked S1ck

Prusa Mini Baseplate mount / Snap-In 30x30 rail stands

Equalizes the Prusa Mini base (5mm distance between the 30x30 profiles and the electronics box) to mount the printer on solid rubber mat/dampers or any flat surface. Replaces the sticky foam feets. Can be scaled in x-direction to match…

Downloads
145
Likes
21
Rating
4.5
P

lego base plate 30x50 studs

lego plate 30x50 studs

Downloads
142
Likes
16
Rating
0
P
PrintablesJürgen Weigert

Cable Clip for Aluminum Construction Profile 30x30 mm

This plastic clip can be inserted into the 8mm groove of a 30x30 aluminum "Bosch" profile. Insert the clip lengthwise, then twist it 90 degree to lock it in place. (No need to slide it in from the end of the profile) As printed the latch…

Downloads
142
Likes
20
Rating
0
P
PrintablesMikagu

Vallejo paint holder 30x17ml

Paint holder platform for 30 bottles of 17ml. I'm attaching the gcode file that would print it as seen in the picture. However, I've printed it in a Anycubic Kobra. If you have a different printer, I would suggest to use the 3mf or stl…

Downloads
141
Likes
16
Rating
5