Star Wars The Mandalorian's N-1 Starfighter 75325 wall mount
wall mount with added support for N-1 starfighter
Print approx. €6.16–€7.53 excl. taxPreliminary estimate for one variant
- Downloads
- 68
- Likes
- 2
- Rating
- 0
136 models
wall mount with added support for N-1 starfighter
Print approx. €6.16–€7.53 excl. taxPreliminary estimate for one variant
I found the look of the N-1 not nice enough, so I designed a few special parts. I printed this in silver pla with 3 perimeters and no infill.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Printed at default 0.20mm 15% infill.
Originally published here: Samsung Galaxy A32 4G a325 case by tato_713 - Thingiverse This case is for the Samsung A32 4G (models started with a325), the 5G version is a bit bigger. For the 5G version (a326 models), see this . Some of the…
Customized version of http://www.thingiverse.com/thing:189264 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=189264 Print instructions Category: Containers Instructions Using the following options:…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a recreation of Lego Technic part 6332570 (axle and pin connector). I printed on my Prusa i3 MK3S at .10 detail. After printing, I would recommend either the .07 or .05 ultradetail. The part works perfectly but it is not totally…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Basado en mi modelo, adaptado a los mandos a distancia. dos modelos con diferentes anchos Fotografías de modelo laminado con @ideamaker con textura. https://www.printables.com/es/model/250790-toothbrush-holder
This model is compatible with the lego system.
This model is compatible with the lego system.
wheel pxn v10 pro/ultra 325mm jeśli ktoś wykona będę wdzięczny za zdjęcie i komentarz
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This loosely fits the Klein Tools 32500 11-in-1 Screwdriver. There is no lip for making it stackable since the screwdriver sticks up above the body anyway. UPDATE: Based on feedback, I've added a finger hole. Both models are available.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
No screws required, 2 clamps are used instead to hold the 2 enclosure parts together and also serve as feet. Steps to assemble: 1. Place the board into the bottom of the enclosure. 2. Place the top of the enclosure over the bottom one. 3.…
This is a stand for the LEGO Der N-1 Starfighter des Mandalorianers (75325). I used transparent PETG, no bottom layer and add a modifier for 3 perimeters at the top of the stand.
This model is compatible with the lego system.
Just print the parts, put pegs in one side of each piece, put the pieces together, then screw it on. I didn't use glue or anything and It's pretty sturdy. Need to print 6 pegs.
Astra J headlight cleaning system nozzle holder with the part numbers 13258411 and 13258412
The cupholder on my 1995 BMW 325i E36 never actually properly held a drink whether it was a can or XL fountain drink. I made this to fit in the factory cupholder spot. A yeti and soda can both fit, but I haven't tried much else yet. You…
Designed this for a friend to adapt his monitors (Viewsonic vx3258-2kc-mhd) to a VESA mount, this is 100x100 spacing. I printed them out of carbon fiber polycarbonate. You'll need M4 screws (maybe about 20mm?) and 4 M4 lock nuts to attach…
This model is compatible with the lego system.
Replacement gasket Jerry cans. This is the gasket that goes in the jerrycan lid. Wavian Part number 2325. The gasket for the Jerrycan nozzle/spout is 2325N and can be found here…
My friend collects old Tonka Toy Vehicles. In 1965, Tonka make a police jeep #325 with a black & white striped hardtop roof. In 1962, they made a #350 Pink& White Surrey Jeep. There is also a green roof from the Vintage 1965 Tonka Jeep…
FINAL PRODUCT: see pics battery flange 50325MY1000 for RD07 / RD07A print it in ASA / ABS or some Heat resistant filament use supports 30% (or more) infill
Replacement gasket for the high quality Wavian Jerrycan spouts. This is not the same as the gasket that goes in the jerrycan lid. Part number 2325N. The gasket for the Jerrycan lid is 2325 and can be found here…
This model is compatible with the lego system.
Replacement cap for the brake fluid reservoir on a BMW E30 325iX as these are no replacements available any longer.
Beim Weber Gasgrill SPIRIT E-325 GBS (Modell 2025) fehlten mir die kleinen Lenkrollen. Im Original sind einseitig nur Standfüsse verbaut, ich bevorzuge jedoch Lenkrollen weshalb ich einen entsprechenden Adapter konstruiert habe.…
( 43250-80G00-LD8 ) This is a hub cap/center cap for the original OEM Enkei white wheel set for the Suzuki Ignis Sport. Diameter is 54.1mm so it might fit other wheels too with some changes. I recommend wrapping a single layer of…
My solution to mounting my Klein MM325 Multimeter to my apartment wall with command strips. I personally used Command 15 lbs Velcro strips (linked below), but anything smaller would also work. I designed this model to be printed upside…
This is a CV Joint Boot for the front left CV Joint on a Land Rover Range Rover - original part number LR032576 ... works exact the same as the original but for fraction of the costs if made on your 3D printer using TPU Český popis Tato…
Im printing in PLA upside down. If you know how to use a 3d printer then you can print this :D Use it as you like !
Custom dash kit to install a Sony XAV-AX3250 in a MK4 volkswagen Jetta (mine is from 2004, but I believe it should fit all MK4 Jettas, and potentially other VWs from the era). Is a toolless and screwless install. When printed face down…
took inspiration from : https://www.printables.com/model/1332736-fosi-audio-zk-tb21-amp-frame decided to make one for XY-AS21HPA (TPA3255 AMP)
The clip securing the battery cover on this remote broke off a long time ago, then in my last move, the cover itself got lost. Print Settings Printer: Anet A8 Supports: Yes Resolution: 0.2 Infill: doesn't matter Notes: I recommend…
Model Camera Wall Mount 90 angle for TP-LINK Tapo C320 / C325WB You will need screws: 3x M3 screw (approx. 15mm long), 3x M3 nut for camera fixation, 3x For walls - good for you (concrete, wood, metal, etc.) Models: - Without holes - Hole…
A mounting plate for an Aliexpress TPA3255 ZK-3002 2x300W stereo audio amplifier. A cheap and cheerful module, I needed to mount it to the wall of an enclosure that's got plenty of space. I printed in ASA for heat tolerance, and used M3…
The Anker PowerCore Essential 20K battery bank isn't really powerful enough to charger the deck while you play, but it's the battery bank I have, so I wanted to make a clip to hold it. You can buy the same model here:…
I modified the upper mounts for 325mm long shafts from Prusa MK4.
Bonjour, Voici un petit élément décoratif sur le thème de la BMW E30. Vous y verrez, selon l'angle de vue, soit la forme du véhicule soit le modèle en toutes lettres ! Si vous n'avez pas d'imprimante n'hésitez pas à me contacter pour…
I mocked up a simple rod in Tinkercad with 12 sides. No supports needed for me. Rotate 45 degrees to fit on printer as needed. I printed it on a Elegoo Neptune 4 Plus.
This model is compatible with the lego system.
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
Zeppelin LZ-129 Hindenburg for multi-colour 3D printers, featuring the original ‘Hindenburg’ lettering.
Print the same way as all other Stealth Press parts.
One of my knobs was flaking its top layer off so I designed replacements. Each knob is 2 parts held together with compression. No support material needed during print. I suspect they will work for other Weber models. Printed on both a…
This is a make for the popular IKEA ivar cupboard floor protection. There seems to either be a shortage of those or they are going out of production, I could not find them on the Ikea website any more. So I made my own. I added a screw…
Tool holder for Large Wrecking bar 325mm. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 60mm W - 22mm H - 95mm We design…
The model is parametric, it can be edited using Onshape: https://cad.onshape.com/documents/9be1b45537769e54895c18dc/w/24e60805c755794510d957a9/e/4686eb02a52578853df7023a (you need to have Onshape account to change variables). Recommended…
When we went to use our SpotLifter® PowerBrush one night, I tried removing the waste tank cap. Because of age the cap had become brittle and shattered into many pieces. Needing to do more cleaning that night, I made a replacement and was…
Designed this simple diff output seal installation tool for my E92 325i (3.0L). It makes installing the seal easier and accurate. I would recommend printing it with a high infill density to give it strength, especially if using PLA, and…
325 WSM stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
The drawer has a usable size of 120 x 325 mm and contains a total of 48 single compartments. Assembly instructions https://drive.google.com/file/d/1qCtDpzN-aBK7WvKwzcGi4CXTSFUXvq7o/view?usp=drive_link
Hey everyone! Just wanted a screw mount version of this. All credit to 3d addict @Bourgeois_2851285 for the design! This is my first post so go easy on me, I've been learning to design in blender for a few months now and done some more…
325 WSM Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
Insert plate Miter saw King Canada model 8325. Do the job as is request. Made with PLA+ color red and one with PLA poly terra pastel blue. Normal infill; for more spec see the picture. Hope some one find this model good for him.
Piece to prevent movement and fall of the fryer. Check that to remove the food tray, it moves, and may fall, with this support it prevents the sliding movement, and it can be moved without any problem by going up.
A floor plug to seal the hole under the carpets of a BMW E46. Keeps out the bugs and water. Print Settings: Infill: Gyroid Infill Percentage: 15% Walls: 3 Material: TPU 95A
Holder for 4 Tapo C325WB cameras with rail and floor pieces. Note: I'll make a new 5 camera setup soon, since promised 127 degree FOV is actually 110 degrees. (FOV in these cameras is diagonal FOV! So it's actually more like 110×70…
With this you can attach four Tapo C325WB cameras top of one 2cm x 2cm x 2m pole and use them as your "all-sky" camera. Wires can be guided through the base. PETG, 15% infill, 0,2mm layer
Replacement for broken Hot Wheels 63258 front axle. Print with support. My car went back to life! Works like charm. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: Yes **Resolution:** 0.15 - 0.2 Infill: 30%…
Lesson Plan: With a partner, recreate a ghost clip using Solidworks. The goal is to be both accurate and coordinated with my partner to create a replica ghost clip with our initials engraved on it. Construction Instructions: Constraint…
Designed these holders for my dad so that he can easily sit the chiller unit on top of his PrimeWeld TIG325X Tig Welder. Yes I know it's probably not the best idea to have a reservoir of coolant sitting on the top of a welder, but it…
A storage solution for spare ink bottles for the Epson L3250 (Eco Tank) color printer.
I designed this as a multiple case calibration. Since ive switched to FreeDi firmware ive been learning how the machine works & how to improve it at least for my case. Ive been spending more time tuning & editing the printer.cfg to be…
ORGANIZZATORE GT325 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Cut from rubber, or print in TPU 100% infill
Mikuni 13251-02410-000 VM12, VM14 float bowl gasket for Suzuki PV50 12mm-14mm carburetor Printed in TPE.
DIN rail mounting adapter designed for Milesight industrial routers USR325 . This adapter allows secure installation of the router on standard DIN rails commonly used in electrical cabinets and industrial environments. The model has been…
plug to close this hole in this crankset from mud/dust ect
Apple hat die Größe des MagSafe Charger mit 25W gegenüber dem Vorgängermodell mit 15W leicht verändert. Um die bereits vorhandenen Halterungen weiterzuverwenden, habe ich diesen Adapter erstellt.
I would recommend printing a pair of feet, and using them together for better stability. I used the smooth variable layer height, but this isn't essential. Printed in Prusa PLA These are a couple of mm taller than the original, but fit…
Convenient cases for storing thermocouples in the original tool box.
Carcasa para proteger a lo que seria el Adaptador de Corriente Alterna y al cable
Italiano sotto ENG : Cover for two Fuji NP-W325 batteries integrated with a dual SD cards holder. 3D project (.f3d and .step files) included, feel free to remix (e.g. adding a full-empty slider indicator...no time to do it myself :-) )…
Project Name: Custom Handle for LocknLock Thermal Tumbler Target Model: LocknLock LHC3257PIK (550ml Pink Vacuum Insulated Mug/Bottle) Purpose: Provides an ergonomic carry grip to improve portability and usability for daily outdoor or…
I broke mine, so I simply remodeled it.
les cales de ces raquettes se mettent souvent sous le pied sans que l'on veuille. j'ai ajouté un verrou que je peux manoeuvrer avec le bâton the cleats of these snowshoes often get underfoot unintentionally. I added a lock that I can…