Search results: 3ds

Sort order

632 models

P
Printablesplachytomas.cz

Carl - 3Dsets Model8 Buggster driver

Remix of original model: https://grabcad.com/library/the-male-figure-carl Changes on model fits to seat of 3Dsets Model 8 Buggster his right leg is shorter, fits to pedals right hand on other position brand new ears less belly fat more…

Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant

Downloads
449
Likes
56
Rating
0
P
Printablespstimpel

Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com

This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
294
Likes
22
Rating
5
P
Printablesplachytomas.cz

Stand for 3Dsets Buggster Model 8 & Buggy Model 7

Print settings 0.2layer Quality profile, printed with PLA. Original bottom part doesn't fits on Prusa Mini printing plate. Model is bigger as maximal size of plate. So, it was little bit redesigned for printing on Prusa Mini. Assembly…

Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
50
Rating
4.88
P
PrintablesLukáš Foukal

Snowplow for 3dsets Landy 4x4 with height adjust

This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
240
Likes
47
Rating
5
P
PrintablesMrSnid

8mm to 12mm Hex Adapter for 3dsets Model 7 Buggy

Original file had to much play in the 12mm tire and around the 8mm axel. The updated file fits perfectly snug on the model 7 buggy. Printed with PLA .15mm with a brim.

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
25
Rating
5
P
PrintablesAdam Drtina

3DSets_Beadlock ring_70g weights

So I made the beadlock rings for the 3DSets rancher wheels to prevent tires from slipping of the rim. In addition, you can add 70g weights to each of the ring to lower the center of gravity. To add the extra weight, I used these Pb…

Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
13
Rating
5

Nintendo 3DS Stylus

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…

Downloads
3,200
Likes
174
Rating
5
P
PrintablesPlaste-Metz

Grip & Stand for New 3DS XL

On Thingiverse I found a really good grip for the Nintendo New 3DS XL. So the handling while playing is much better for bigger hands! You can put the original model in the shelf standing, BUT it was unstable and crashes almost on the…

Downloads
1,868
Likes
229
Rating
4.87
P
Printablesmagu

Nintendo DS dummy cartridge (DS/DSi/3DS/2DS)

No longer needing anything in Slot-1 of any of my Nintendo DSs, I wanted something stopping pocket lint from entering the device. This dummy cartridge does the trick. Category: Video Games

Downloads
1,650
Likes
163
Rating
4.91

New Nintendo 3DS XL Stylus

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…

Downloads
1,453
Likes
89
Rating
5

Nintendo 3DS XL Stylus

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…

Downloads
1,430
Likes
106
Rating
5
P
PrintablesRNLauritsen

New 3DS XL stand

New 3DS XL stand, 3 diffrent verison: Large: fully supported. Small: smaller version. Light: uses less marterial, butmight require support when printing.

Downloads
1,271
Likes
106
Rating
5
P
PrintablesThaliaFP

New Nintendo 3DS XL ergonomic grip smooth

I printed the model from Luckystrykx and have to say I didn't like the feel with the gap on the side. It had sharp edges, so I used Meshmixer to smooth it out. I recommend printing it at 97% in PLA because it does not shrink as much as…

Downloads
1,143
Likes
127
Rating
4.75
P
PrintablesPepinillo2014

Pokeball with hinge (V1.6), functional button and insert for GBA, DS and 3DS cartridges

This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…

Downloads
988
Likes
421
Rating
4.67
P
PrintablesShyavanS

3DS XL Grip Case with PS4 Style Handles

A grip case for the original 3DS XL with PS4 style handles to provide extra comfort. There's also an insert that covers the stylus and is friction fit so that the design is seamless and it doesn't bite into your hands, but you still have…

Downloads
986
Likes
83
Rating
4.4
P
Printablesplayfellow__

3DS XL Skadis Mount

A mount for the 3DS XL on the Ikea Skadis

Downloads
857
Likes
127
Rating
5
P
PrintablesBebop182

New 3DS Game Cartridge

1:1 New 3DS compatible fake cartridge model. It does work with old 3DS too, however you need good accuracy otherwise the operation might not be smooth as the cartridge hook on o3DS is larger and could bind a bit. This was designed with…

Downloads
834
Likes
65
Rating
4.92
P
PrintablesMichael Pine

3Dsets Landy Mini - trailer

Trailer addon for Landy Mini by 3D Sets. It is just a little remix of by markberk from Thingiverse. https://www.thingiverse.com/thing:4656335

Downloads
781
Likes
182
Rating
4.67

New Nintendo 3DS Stylus

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…

Downloads
763
Likes
31
Rating
0
P
PrintablesMatthijs2101

3Dsets.com Landy Mini Long Trailer + towbar

A trailer for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets Remix of the smaller trailer. For me it was too small and it was too high compared to the car. So I remixed it. Also fixed the…

Downloads
748
Likes
122
Rating
4.94
P
PrintablesDeKura

Nintendo 3DS Game holder

Print letters with horizontal expansion -0,28mm for the best result.

Downloads
744
Likes
131
Rating
5

New 3DS XL Wide Ergonomic Grip

This is an ergonomic grip for the New 3DS XL. There is nothing obstructing the headphone jack, power button, stylus, game cartridge slot, or charging port. I have rather large hands and I designed it to fit my specifications. I've also…

Downloads
708
Likes
122
Rating
4.92
P
PrintablesGabrioB

Nintendo DS Family Customizabile Stand (for DS/lite/DSi/3DS/2DS etc.)

I like this Nintendo DS lite stand from @baumesfab31as it's really fast to print and save a lot of material. However I prefer embossed design as it looks better in low-end FDM printer when printed in multicolor. Thus, I redesigned from…

Downloads
640
Likes
92
Rating
5
P
PrintablesPencho

Generic handheld stand [PSP, PSVITA, STEAMDECK, 3DS]

Display your favourite handhelds! I was horrified by big chunky stands so I've made one myself! I have tested it with Steamdeck, PSP, PSVITA, New 2ds XL and DS. It could not work for other handhelds Share your pictures if it worked for…

Downloads
623
Likes
83
Rating
4.8
P
Printablesoutcastrc

Driver and passenger for 3dsets Jeep

Male driver is based off of: https://grabcad.com/library/the-male-figure-carl Female is based off of: https://grabcad.com/library/mulher-sentada-seated-woman-human-person-1 Scaled and modified to fit as a driver and passenger in the…

Downloads
587
Likes
47
Rating
0
P
PrintablesBenny

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 (normal and wagon) & Bamboo

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…

Downloads
573
Likes
54
Rating
4.94
P
PrintablesaceofSPACE

Nintendo DS/3DS Game Cartridge Case

The catches for the games are printed in place and have to be freed with a screwdriver or similar. 2 M3x30mm Screws are needed for the hinge

Downloads
564
Likes
74
Rating
4
P
PrintablesBushi

3DSets Landy "Land Rover" Mud Flaps / Splash Guards

This is a remix: https://www.thingiverse.com/thing:4394842 Mud guard for the front and back of the 3DSets Landy. Logo land rover

Downloads
556
Likes
98
Rating
4.86
P
PrintablesEnyo

Game Cartridge Case / Holder - Nintendo DS / 3DS

A simple holder designed with the purpose of freeing up some space from your shelves. No more need to keep all the physical cases, or have your cartridges floating around loose, when you can instead store them in this! This holds ten (10)…

Downloads
547
Likes
52
Rating
4.5
P
PrintablesBenny

3Dsets servo arm

15mm is hole spacing 3.10. 2020 - servo arm 15mm 3.10. 2020 - added servo arm 15mm + nut hole 4.10. 2020 - added 20mm version 4.10. 2020 - tooth optimization Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Downloads
545
Likes
54
Rating
4.33
P
Printablesjaredpearson

Nintendo 3DS Card Holder (x12)

Needed a box to hold 12 Nintendo 3DS cartridges.

Downloads
542
Likes
90
Rating
4.75

New 3ds (Small) Custom Faceplates

The New Nintendo 3ds (Weird name, don't shoot the messenger) had a very cool feature where you could swap its top and bottom panels out with ones that had different designs. Since it's difficult/expensive to get your hands on originals,…

Downloads
540
Likes
62
Rating
5
P
Printablesmewil666

Nintendo DS&3DS game stand

Display for NDS and 3DS game cartridges. Fits 15 cartridges

Downloads
498
Likes
86
Rating
4.75
P
PrintablesQuittenkompott

Nintendo 3DS/3DSXL Circle Pad replacement

Some people seem to have a problem with their circle pad braking off and leaving just a tiny stick. This replacement part is designed to just stick on it without interfering with any vital function of the 3DS itself.

Downloads
483
Likes
36
Rating
0
P
Printablessussy man

original 3ds grip

works wonderfully in pla, glue (or other sticky bindy thing) required for the hold in place thingys and to put the 2 parts together. i recommend printing with a brim to prevent warping.

Downloads
465
Likes
62
Rating
4.67
P
PrintablesMartin

Angry eyes for Rancher jeep from 3dsets.com

Angry eyes for Rancher jeep from 3dsets.com To be glued on top of the default grill Print instructions No tested yet, let me know how it prints and fits

Downloads
460
Likes
35
Rating
5
P
PrintablesCristi D.

Angry Eyes Grill for Rancher 3dsets

Modified front panel so that the angry eyes grill fits over it. Both parts easy to print flat on the printer. Made holes to replace the two upper 3 x 10 mm screws with 3 x 12 mm screws to secure together the angry eyes mask, front panel…

Downloads
460
Likes
36
Rating
5
P
PrintablesRNLauritsen

3DS GAME CARTRIDGE HOLDER

This is the 3ds game cartridge holder. The holder is designed to close like a book, protecting the sticker on front of the games, while helping storing them, or for display. Supports both 3DS and DS games. Holds op to 12 games at once.…

Downloads
457
Likes
66
Rating
4.2
P
PrintablesPavel

Beadlock Rims for 3dsets

Designed for GMADE MT-1902, but will probably fit variety of other tires. Rim diameter is 49mm and width is 30mm (+4mm with beadlocks installed). Hardware: 1x SHCS M3x16-25 through the center 21x SHCS M2x6-10 for beadlock 3x SHCS M2x6 for…

Downloads
455
Likes
130
Rating
4.89
P
PrintablesMatthijs2101

3Dsets.com Landy Mini Bull Bar

A bullbar for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets No supports needed, they are pre-modeled in there in the spirit of the Landy Mini model. Just remove them. Print Settings…

Downloads
454
Likes
68
Rating
4.86
P
PrintablesSi1verEag1e

RC 1.9" 105mm FLEX tire inserts (Specially designed for 3DSets Max van )

My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…

Downloads
450
Likes
90
Rating
5
P
Printablescrambosho

New 3DS XL Skadis Mount

Couldn't find a New 3DS Skadis mount, so just extended the original model a few millimeters to fit with the new device.

Downloads
421
Likes
36
Rating
5
P
PrintablesBushi

3dsets bambo Front Radiator Screen toyota & blank

Solid layers - Top / Bottom (0 layers) Infill density: 30% Infill type: Honeycomb Perimeters: 2

Downloads
418
Likes
68
Rating
5
P
PrintablesDash Lambda

Nintendo New 3DS Charging Cradle (Normal AND XL)

This is a charger dock/cradle for the Nintendo New 3DS, both regular and the XL/LL. This project started to solve some problems I had with this really cool dock from Hackaday , and I ended up totally redesigning it. Here's a list of this…

Downloads
400
Likes
75
Rating
5
P
PrintablesVojta

Open differential for 3Dsets Jeep Rancher

This is open differential for Jeep Rancher from 3dsets. I test it on version Wagon, but should be possible to mount it also on other versions. I created it this open diferencial, because I'm using my Rancher in house on vinyl floor and…

Downloads
384
Likes
103
Rating
0
P
PrintablesJuergen

Front Bumper with 1:8 Warn Winch Mount for 3DSets Landy

This is a Front Bumper for a 1:8 scale Warn Winch for the 3DSets Landrover Defender. Included are two versions. One with holes to mount tow hooks, and one without the holes. Mount the parts as shown on the pictures. You need the Original…

Downloads
376
Likes
67
Rating
5
P
Printablesnolano386

NEW 3DS XL/LL cartridge dust cover

This is contoured to match the lines of the New 3ds XL/LL. I don't know if it will work for any other models.

Downloads
375
Likes
26
Rating
5
P
PrintablesAFN

VW Golf I GTI 3dscan

VW Golf I GTI 3dscan

Downloads
374
Likes
36
Rating
0
P
PrintablesSibrand007

Nintendo DS/3DS Game Cartridge Case

Holder for 12 of your favorite Nintendo DS games and the catches for the games are printed in place and have to be freed with a screwdriver or similar. 2 M3x30mm Screws are needed for the hinge.

Downloads
374
Likes
45
Rating
4.75
P
Printablesvivid

New 3DS Grip (NOT XL)

Printed at 0.1 layer height. You might wanna use a blowdryer to heat up the parts before assembly. I also heated up the whole grip before inserting the N3DS to adjust the fit.

Downloads
373
Likes
46
Rating
4.8
P
PrintablesMod20087

"Gripstick" custom anti slip Circle Pad stick for 3ds and 2ds

A simple replacement for your 3ds and 2ds circle pad which should reduce the slipping issiue of your circle pads.

Downloads
363
Likes
18
Rating
5
P
Printables4DSArts

Replacement Bottom Shell for New Nintendo 3DS XL (READ DESCRIPTION)

It is NOT advised to print this model unmodified. You will at least need a Dremel to even out the rough areas. I uploaded this model because I wanted for it to get out for others to improve. Not that I'm pushing the responsibilities on…

Downloads
359
Likes
36
Rating
0
P
Printables3DPrintSOS

3DSets Landy Wagon Roof Rack with LED Bar

This is a mod that allows you to use this roof rack: https://www.3dsets.com/product/roof-rack-accessory-for-model-4/ on the much larger Landy 4x4 Wagon. You will need at least a 300x300 print plate to print the rack and side rails but I'm…

Downloads
353
Likes
81
Rating
5
P
PrintablesCJ I.

All in One Angry Eyes Grille for Jeep Rancher by 3dsets.com

I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…

Downloads
344
Likes
42
Rating
5
P
PrintablesM

3DSets Model 7 Buggy dashboard with colour changes

This is a dashboard for 3DSets Model 7 Buggy designed for a double colour change at layer height. Open the 3MF in PrusaSlicer and press Slice now to see the layers the colours are changed at. Print at 0.15 mm layer height using PLA. Also…

Downloads
344
Likes
71
Rating
5
P
PrintablesAFN

Renault 5 3dscan

3dscan renault 5

Downloads
342
Likes
23
Rating
0
P
PrintablesMartin

Stand for 3dsets Landy 4x4 Wagon

Stand for 3dsets.com Landy 4x4 Wagon modified upper part for better vehicle balance and better fit slightly wider stand footprint for improved stability Print instructions 0,3 mm layer height, 3 perimeters, 15 % gyroid infill.

Downloads
324
Likes
55
Rating
4.9
P
PrintablesDwarfDecker

Nitendo 3DS circle pad cap replacement

print this cap to replace old used cap for you 3DS

Downloads
311
Likes
12
Rating
5
P
PrintablesHatrick3D

GMC Grille for 3DSets Model 14 MAX Team Van

This grille is for the 3DSets Model 14 “MAX Team Van” aka the “A-Team Van”. It will replace the Grill labelled “MAX” with the “GMC"-labelled version that you need for the A-Team Van (or any othe GMC Express Van).

Downloads
306
Likes
51
Rating
0
P
PrintablesDuctoman16

Nintendo 3DS Stand (Larger Lip)

Updated version of the Nintendo 3DS stand by gilianmartins. This version has a larger front lip, because my New 3DS XL with a case on it kept sliding off the original one.

Downloads
305
Likes
17
Rating
0
P
PrintablesJSeppl

3DSets Landy Mud Flaps / Splash Guards

Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.

Downloads
291
Likes
57
Rating
5
P
PrintablesMakkuro

Nintendo 3DS Game Card Box

This is a remix of the DS game card box. I used it for 3DS games. It has a bit more space between the cards to see them. Its using a bit less material and you see the full front of the first card. You can customize the number of cards. To…

Downloads
284
Likes
53
Rating
5
P
Printableszzzy

YA3DSTT yet another 3D scan turn table!

Just in case yet another 3D scan turn table were needed... here we go. Please observe the CC+attrib+non-commercial license. Don't try and make money off my hard work. If you want to create derivative work I provide the Tinkercad design .…

Downloads
279
Likes
28
Rating
4
P
PrintablesJan January

Tire model rescuer 3dsets

opona do modelu rescuer 3dsets

Downloads
275
Likes
56
Rating
5
P
PrintablesHatrick3D

Sun Roof for 3DSets Model 14 MAX-Team / A-Team Van

The parts of this mod are a replacement for the “Roof1”-part from 3DSets in case you want to add a sun roof to the Model 14 / MAX-Team / A-Team / GMC Vandura Van. You will need an additional piece of clear plactic sheet for the glass of…

Downloads
274
Likes
44
Rating
5
P
PrintablesDavey

Creality Raptor Bridge 3Dscan

A 3Dscan of the Creality Rapor Bridge.

Downloads
271
Likes
25
Rating
5
P
PrintablesRené Erler

Nintendo 3DS XL Hinge Bracket

This is a simple bracket designed to keep your screen from sagging with broken hinges. It is directly inspired by this design on Hackaday because the original files are no longer available. Print Settings Printer Brand: Prusa Printer:…

Downloads
269
Likes
32
Rating
0
P
PrintablesRvadrichem

Hood strud for rc car 3dsets model 7 buggy

As I am building the model 7 Buggy from 3Dsets.com, I was missing a hood strut to keep the hood open. This can be handy when working on the receiver, which on this model is located under the hood, or just to keep the hood open when on…

Downloads
268
Likes
156
Rating
5
P
PrintablesThe FuZZ

Blank license plate for 3Dsets Buggy .stp included

I made this blank licence plate as a basis for guys interested in making their own. Step file is included although not sure if I exported it using right preferences.

Downloads
267
Likes
30
Rating
5
P
PrintablesDaniRodes

Smittybilt Bumpers for 3DSets RC Jeep Rancher (Wrangler)

I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…

Downloads
266
Likes
48
Rating
5
P
PrintablesSascha Uncia

Modified Onigiri Press Lid for Ivan3Ds Onigiri Press

A small modification to Ivan3Ds Lid. The handle was made slightly longer and chamfers were added to the hard edges. This removes the need for bridging and produces a smoother surface that is easier to clean. No sharp corners for food to…

Downloads
262
Likes
25
Rating
5
P
PrintablesGameBoy101

3DS Cover Plates

Here are some Cover plates for the New 3DS. A Poke Ball front cover, a Stylus Holder and a back plate with SD card access. Printed on Sovol 06 Plus .20mm Layer Height 20% Infill Use support if needed for the small overhangs on the clips.…

Downloads
260
Likes
37
Rating
5
P
PrintablesFredrik

Bambu Lab Over-Engineered Y-Splitter_v2_3DSWay

These were the fittings i had laying around but they are quite a bit larger than the standard plastic collet. https://www.aliexpress.com/item/1005002680262764.html

Downloads
258
Likes
31
Rating
5

Nintendo DS & 3DS Game Case Display Stand

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore Our stands come in 2 varieties, stand and kit. The Stand…

Downloads
256
Likes
39
Rating
0
P
PrintablesZCraftworks

Question Block 3DS/NDS Cartridge Case

This is a remix of Kickass3DPrints' Question Block cartridge case to fit 3DS / NDS game cartridges instead of Switch cartridges ( https://www.thingiverse.com/thing:2517867 ). The exterior is the same, but the interior has been modified…

Downloads
251
Likes
65
Rating
5
P
PrintablesMartin

3dsets Landy 4x4 front wheelhouses with holes for LED lights

3dsets.com Landy 4x4 and Landy 4x4 Wagon modification for LED lights Wheelhouses - modified original mesh, added 24mm holes for lights Rings - to be used instead of default printed lights, push the LED light into it Print instructions…

Downloads
250
Likes
34
Rating
5
P
PrintablesAhmad

Checkered Plates for Hood and Fenders | 3DSets Landy Mini

INFO Scaled down the original model to fit the Landy Mini, more items like air intake and original model for full size 3DSets Land Rover in the link below. Credit to original creator: https://www.thingiverse.com/thing:4270060 PRINT…

Downloads
245
Likes
42
Rating
5
P
PrintablesFloowey

Nintendo new 2DS/3DS XL Vertical Stand

Simple stand for a new Nintendo 3DS XL. Looks good and it doesn't take up as much space as horizontally, while still allowing charging. Printable on both side and bottom. Print instructions Unassociated tags: golden sun Category: Toy &…

Downloads
242
Likes
23
Rating
5
P
Printablesevilblubb

Gridfinity 1x4 Nintendo New 3DS XL holder

1x4 Gridfinity holder for a Nintendo New 3DS XL

Downloads
242
Likes
37
Rating
5

3Dsets metal gear axles for Landy Rancher Bamboo Black Crow

!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…

Downloads
238
Likes
78
Rating
5
P
PrintablesBushi

grill gmc for model 14 3dsets

grill gmc for model 14 3dsets

Downloads
238
Likes
40
Rating
5

Nintendo 3DS XL Display Stand & Kit

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore Our stands come in 2 varieties, stand and kit. The Stand…

Downloads
236
Likes
40
Rating
4.67
P
PrintablesBackmann3D

3dsets Landy trailer towbar

This is a towbar for the fantastic @3dsets Landy model 3, 4 and 5. It fits on the rear bumper of the Landy. Use a 1,8mm drill to enlarge 2 of the small premarked holes. Hardware needed: 4x m2x6 1x m2x10 I used the same kind of screws used…

Downloads
235
Likes
62
Rating
0
P
PrintablesTim A.

3Dsets Landy Mini Realistic Towbar + Trailer Coupling

This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…

Downloads
231
Likes
33
Rating
5
P
PrintablesMark Berk

3Dsets Landy Mini addon, Roofrack

My creation of a roof rack, to mount on a 3Dsets Landy Mini: https://www.prusaprinters.org/prints/41264-landy-mini-by-3dsets Print instructions Category: Toys & Games Summary My creation of a roof rack, to mount on a 3Dsets Landy Mini:…

Downloads
226
Likes
38
Rating
5
P
PrintablesThird Dimension

Brown bear skull moveable jaw lifesize printable on the Prusa Mini+ 3Dscan

The original model was available thanks to the University of Dundee Museum Collections. Original scan available here with CC0 Public Domain license: https://sketchfab.com/3d-models/brown-bear-skull-e01dc94d20df4b888c7a6979bffb45a9 This…

Downloads
225
Likes
72
Rating
0
P
Printablesharry48225

New 3ds XL charging cradle (No charger modification required)

This charging cradle is based on Nintendo's offical one however this cradle works with your original cable. All the features are the same it is easy to insert and remove with no force needed. There is also a cut out for the notification…

Downloads
224
Likes
38
Rating
4.5

New Nintendo 3DS XL Display Stand & Kit

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore Our stands come in 2 varieties, stand and kit. The Stand…

Downloads
223
Likes
48
Rating
5
P
PrintablesBringItOn

DS/3DS game display stands. Zelda/Pokemon

simple display models for DS/3DS games for shelves or desk. prints great at .14-16 layer height, 3 walls/top layers and 2 bottom layers and no need for supports. Please like if you enjoy it

Downloads
222
Likes
96
Rating
5
P
PrintablesTimX24968B

Nintendo 3DS XL - Red/Black

So i made this about 8 years ago and its about as accurate as you're going to get with a tape measure. there was little disassembly due to the fact that I was still utilizing the console at the time, and I did not want to damage it.…

Downloads
220
Likes
20
Rating
0
P
PrintablesElsa

Nintendo 3DS Game Box Case Holder

I needed a box for my 3DS Games. If you want put the logo on in, help yourself. Because of copyrights, I didn't do this. Thanks for understanding. Edit: Designed also cartridge for the used games without cases.…

Downloads
218
Likes
12
Rating
0

DS / 3DS blank cards

Nintendo DS / 3DS slot 1 cover. FDM: use a single perimeter for the “picture” variant.

Downloads
218
Likes
18
Rating
5
P
PrintablesJSeppl

3DSets Landy License plates / Number plates

Collection of different license plates for the landy model from 3DSets. Overview Cal01 - 1 Color change. BadNews - 4 Color changes. BLOB Galactic Empire - 1 Color change (BLOB = Big Lump on Board).

Downloads
216
Likes
46
Rating
0
P
PrintablesLordMelkor

New 3DS XL Battery Cover Plate w/MicroSD Cut Out (better version)

I saw another attempt to remix the backplate with a MicroSD card, but that version was quick and dirty and did not adhere to the original design of the New 3DS. I did the remix from scratch and did it to better conform to the shape of the…

Downloads
216
Likes
25
Rating
0

Nintendo DS & 3DS Game Tower Display

If you are looking for one but don't have a printer we are selling it etsy Here: https://www.etsy.com/ca/listing/781402186/nintendo-ds3ds-game-tower-display-holds This decorative Tower Display can hold 4 DS/3DS games and displays them…

Downloads
214
Likes
58
Rating
5
P
Printables3DPrintSOS

3DSets Landy Wagon Rear Hi-Lift Jack Mount(s)

Loved @daver18qc's Hi-lift jack https://www.thingiverse.com/thing:3513415 but needed a way to mount it to my Landy wagon from @3DSets. I made two. One is the "full" mount that replaces one of the hinges on your rear door and holds the…

Downloads
213
Likes
65
Rating
5
P
Printables4DSArts

Replacement C-Stick for New Nintendo 3DS/2DS Series

This is a replacement part for the C-Stick found on the New Nintendo 3DS/New 3DS XL/New 2DS XL handhelds. Things you need to be aware of: You need to remove the old C-Stick first. This can be done by disassembling your 3DS, or cutting the…

Downloads
212
Likes
16
Rating
0
P
PrintablesTheLordzofmafia

Wheel 2.4 beadlock MAX TEAM 3dsets

Koło 2.4 beadlock MAX TEAM

Downloads
211
Likes
36
Rating
0
P
PrintablesBassteannh

3DS Belt holder

a 3DS belt holder that I made, did you also know you can play a 3DS as a MP3 player? No? well you should definitely watch this video

Downloads
210
Likes
17
Rating
0
P
Printables3DFLX

Rugged Case for Nintendo 3DSXL and DSiXL

Protective case for Nintendo 3DSXL and DSiXL handheld with self-adhesive foam on the inner walls (2x 1mm).

Downloads
210
Likes
51
Rating
2