Search results: 40x

Sort order

800 models

P
PrintablesGabriel

OLD VERSION! All-in-One Calibration Cube 40x40x40

Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…

Downloads
8,112
Likes
1,144
Rating
4.94
P
PrintablesMrDefaultUser

Audio-Technica ATH-M40X hinge (left & right)

Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.

Downloads
1,964
Likes
70
Rating
4.9
P
PrintablesCarter

Pi4B Flat Fan Case Noctua 40x10 5V/3.3V SnapTogether

Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…

Downloads
1,585
Likes
134
Rating
4.92
P
PrintablesJavor

New petrol canister lid M40x4

New petrol canister lid with Buttres M40x4 thread and with groove for rubber seal. Update 19.01.2024: After 3 years I discovered (and also read) that PETG does not tolerate bio-component (and some additives) in gasoline very well and the…

Downloads
465
Likes
53
Rating
5
P
PrintablesVeracon

Fanatec QR Wheel holder V2.0 40XX

🎮 Introducing the 3D Printed Wheel Holder designed specifically for the Fanatec Quick release Wheels, a must-have accessory for every serious sim racer's setup. Crafted with precision and functionality in mind, this wheel holder…

Downloads
367
Likes
40
Rating
5
P
PrintablesHeikit

Hook Haken 30x30 and 40x40 Bosch Aluminium Profile

It would be nice if you post your make. Thank you

Downloads
275
Likes
34
Rating
0
P
PrintablesCopyRited

Audio Technica ATH-M40x/50x Earcup Shells

Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…

Downloads
195
Likes
42
Rating
0
P
PrintablesAndres L

PRUSA like - Raspberry PI 4 case with a 40x40 fan and bracket for MK3/S

PRUSA like - Raspberry PI 4 case with space for a 40x40 fan and a bracket to clamp the case to the frame of the PRUSA i3 MK3/S In mi case i used a 40x40x20 fan i had lying around (12V from embpaspt) connected to 5V for reduced noise, you…

Downloads
178
Likes
18
Rating
4
P
PrintablesOBA

M40x1.5 Blind Stuffing + Nut and TPU-Sealing / M40x1.5 Blindstopfen + Mutter und TPU-Dichtung

M40x1.5 threaded blind stuffing to close unused M40-openings. Unused PG36-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…

Downloads
102
Likes
7
Rating
0
P
PrintablesTol

Absolutely flat 40x70 cm plates for "Fast Operation Vise"

The main reason why I made these plates was to learn FreeCAD - I wanted to learn and make something useful at the same time! These plates compatible with: * Fast-Operation Vise by…

Downloads
97
Likes
16
Rating
5
P
PrintablesAinon3Dtisk

Large playing cube 40x40x40

Hello, Today I have a large 40x40x40 game cube for you. Suitable for children to play board games. Quite big but it's really easy to play with, and it's perfectly shaped. I used PLA/PETG as the material. No need to use supports!!! If you…

Downloads
89
Likes
16
Rating
0
P
PrintablesSzachu

Gridfinity base for 40x40 aluminum extrusion horizontal

Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.

Downloads
63
Likes
35
Rating
0
P
PrintablesBenni

Dish Washer Wheel Ø40x8mm (Print in Place)

This prints a 40mm dishwasher wheel with the axle already printed in place. After the print you will need to break it loose. But then it works quite good. Only print in PETG or ABS. PLA will melt in your dishwasher.

Downloads
60
Likes
1
Rating
0

Adjustable leg for 40x40 square pipe - Stavitelná noha pro jekl 40x40

Adjustable leg for 40x40 square pipe Insert nut and bolt M10 Pause printing at certain height to insert nut and screw (use M600) ------------------------------------------------------------------------------- Stavitelná noha pro jekl…

Downloads
30
Likes
4
Rating
0
P

40x40 Fan holder for HEPA filter to DIY ikea encloser

Added magnets for HEPA filter for 3D printer Flashforge Adventurer 3 Holes for button magnets 5mm x 2mm Used neodymium magnet 4mm x 1,4mm

Downloads
18
Likes
5
Rating
0
P
Printableswiseby

40x40 Fan Regulator Mount

The mount-plate works with a variety of switch-regulators (many of the boards share the same pcb size and mount holes, not guaranteed though). The images displays a LM2596 with a Noctua 40x40 fan mounted inside a mainboard cover for a…

Downloads
13
Likes
4
Rating
0
P
PrintablesValeriu

Microscope Objective Cover and Barlow Lens Support for Cheap Binocular 20x 40x PCB Microscope

This is an adapter for a cheap optical binocular Aliexpress PCB Microscope "Mobile Repair Professional Binocular Stereo Microscope Industrial Inspection Tool with LED Light" or "20X 40X Binocular Stereo Microscope PCB Soldering Mobile…

Downloads
13
Likes
1
Rating
0
P
PrintablesC3DPR

40x40 Fan filter accessory with cable outlet

Print settings: ------------- Temperature:200.C Bed Temperature:50.C Print Speed:125mm/S Support:ON Infill:80% Infill Pattern:Cube

Downloads
8
Likes
0
Rating
0

Rectangular 140x200mm Stacking Baskets & Lid - Hexagon Pattern

This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!

Downloads
16,869
Likes
4,158
Rating
4.95
P
PrintablesCL Performance

Flow Calibration Cube 40x40x30 mm - Drucker Kalibrierung

English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…

Downloads
2,610
Likes
43
Rating
4.8
P
PrintablesLWC

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Downloads
1,844
Likes
1,231
Rating
5
P
PrintablesGabriel

NEW Version V2! All-in-One Calibration Cube 40x40x40

Calibration cube to test 3D printers. New V2 version included some fixes that stiffens overhang test, makes it easier to read the overhang angle and some more. Calibration Cube All-in-One Included: Letters to identify axis Calibration…

Downloads
1,583
Likes
98
Rating
5
P
PrintablesCarter

Raspberry Pi 3B+ Case for Noctua 40x10

Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…

Downloads
1,491
Likes
176
Rating
4.94
P
PrintablesNoctua_at

NA-IS1-14 Inlet Spacer for Noctua 140x25mm fans

The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…

Downloads
1,056
Likes
121
Rating
5
P
Printablesmivas

Water/Paint/Liquid Mixer 40x40mm

This is a mixer tool for mixing. It prints without supports, the hexagonal handle has a standard 1/4 size and attaches directly to your electric drill. Diameter = 40mm Head height = 40mm Hex handle Length = 160mm

Downloads
849
Likes
203
Rating
5
P
Printablesmcko

Flow test 40x40x40 wall 0.8

Flowrate 40x40x40 wall 0.8

Downloads
847
Likes
24
Rating
4.8
P
Printables2mD

Nozzle Holder Insert/Endcap for 40x40 Aluminium V Slot Extrusion

a Nozzle Holder that fits inside a 40x40 Aluminium V Slot extrusion. Common on many Printers, in my case its an Ender 3 Pro Fits 18 Nozzles and Usually you can Fit 2 of these on your printer, or 4 if you don't mind putting them on the…

Downloads
841
Likes
334
Rating
4.86
P
PrintablesStrathpeffer3D

Prusa i3 MK3S Extruder Stepper Cooler Add-on (for 40x40 Fan)

This is a remix of CG-Tech's excellent extruder stepper motor cooling fan add-on on Thingiverse. EDIT: I've uploaded a second version with deflected air ducts, based on CG-Tech's alternative one. It was a quick bodge and the stl file is…

Downloads
828
Likes
98
Rating
4.73
P
Printablesmkd

Trash bin 240x240x240

Simple trash bin, uses full build space of BambuLab X1/P1 series printers. You can also scale it up or down to meet your needs.

Downloads
772
Likes
50
Rating
5
P
PrintablesIvanov Kirill

Profile pipe plug cap 20x20 and 40x20

Profile pipe plug cap 20x20mm and 40x20mm Заглушка профильной квадратной трубы 20х20мм и 40х20мм

Downloads
763
Likes
42
Rating
5
P
PrintablesDiAleksi

Candle mold 40x100 with a string lock

This is a candle mold container for 40mm diameter and max 100mm tall candle. Lock the mold container with a ziplock Put the candle string through the bottom lid and tape it to lid's hollow Attach the bottom lid to the bottom of the mold…

Downloads
706
Likes
141
Rating
4.25
P
PrintablesDZ_3D_tisk

Kalibrační kostka 40x40x40

Vytvořil jsem kalibrační kostku o rozměrech 40x40x40mm všechny hrany kromě těch co leží na podložce mají zaoblené hrany

Downloads
654
Likes
3
Rating
5
P
PrintablesBlueFalcon1066

Ender 3 V2 40x20 Hot End Fan Shroud

I wanted to switch out the stock hot end fan with a noctua A4x20 but couldn't find a new shroud that I liked. I love the stock shroud, so I basically just redesigned it to fit the larger fan and removed the grills to help with noise. The…

Downloads
647
Likes
76
Rating
5
P
Printablesno one

2,8 TFT SPI 240x320 V1.2 (3d Modell)

2,8 TFT SPI 240x320 V1.2

Downloads
617
Likes
10
Rating
0
P
PrintablesDavid

FlashForge Adventurer 5M lower rear fan spacer- to fit a standard 40x20mm fan to non Pro model for filtering.

This spacer fits over the plastic stand-offs that prevent you retrofitting a stock 40x20mm fan on the AD5M lower HEPA filter housing outlet. Without the spacer there is an approximately 4mm air gap between the fan body and lower filter…

Downloads
614
Likes
94
Rating
5
P
PrintablesAndys1957

Open Cable Chain with Clip 30x40x20mm

Update 16.4.23: Step-Files uploaded Open Cable Chain with Clip 30x40x20mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0,2mm Infill: 30% Filament: Das Filament PETG Category: 3D Printer Accessories

Downloads
613
Likes
31
Rating
5
P
PrintablesJarosz

YES/NO DICE - 40x40mm

Easy-to-Print YES / NO Decision Dice Print Settings: Orientation: Please make sure the die is oriented with the text facing up (see snapshot for reference). Infill: 10–15% Layer Height / Resolution: 0.2 mm Material: PLA Happy printing and…

Downloads
590
Likes
112
Rating
5
P
PrintablesLordDeno

HSW Holder 40x40mm

Honeycomb storage wall holder 40x40mm, to be used with a hallow insert for the honeycomb wall. No supports needed.

Downloads
570
Likes
128
Rating
5
P
Printables93djen

4040 extrusion endcap - 40x40

The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…

Downloads
556
Likes
82
Rating
5
P
PrintablesZerubota

Slim - Item Profil Winkel 40x40 90 Grad / 4040 cornerbracket (8mm Nut)

Wenn mal kein Winkel da ist einfach kurz drucken…. Für Item Profile 40x40 (4040) und Nut 8mnm

Downloads
550
Likes
54
Rating
5
P
PrintablesFrappeMetrios

Aluminum Profile End Cap - 40x40 [mm] Plain

Aluminum Profile End Cap - 40x40 [mm] Plain This is an end cap designed to cover the ends of the standard aluminum profiles that come with the Creality Ender-3 Pro 3D printer. This version is intended for use with the 40x40 [mm] aluminum…

Downloads
536
Likes
29
Rating
0
P
PrintablesLW design

Aluminium profile cover 40x40

Aluminium profile cover 40x40 (N8I) with good fit. Useful to cover the sharp edges and keep off dust.

Downloads
512
Likes
59
Rating
5
P
PrintablesEldarHan

Creality Ender 3 V2 - Clean Shroud 2.0 (40x20mm Hot-End Fan, 4010 Blower Fan)

This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…

Downloads
506
Likes
66
Rating
5
P
PrintablesSchepperTs

Eurobox - 60x40x32

About The most common sizes (length × width) are 600 × 400 mm and 400 × 300 mm, which can be stacked together to fill a Euro-pallet measuring 1200 × 800 mm. This model is 1:10 scale.

Downloads
494
Likes
18
Rating
5
P
PrintablesIgaoFerreira

Bandeja 140x70mm

Bandeja utilitária 140x70mm

Downloads
467
Likes
10
Rating
0
P
Printablesjszewczyk

Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).

Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).

Downloads
464
Likes
33
Rating
5
P
PrintablesPolyGone

40x20 Cable Duct for 4040 Aluminium Profile

This is the 40x20 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x40 mm versions.

Downloads
458
Likes
69
Rating
5
P
Printablesprint-a-holic

Aluprofil 40x40 Nut8 Typ I

Das Model kann beliebig im Slicer auf Z vergrößert werden. Z=100% hat dann ein 40x40 Profil mit der Z länge: 1mm Z=200% →Z länge 2mm … Z=?00% → Z länge von ?mm ------ The model can be enlarged to Z as desired in the slicer. Z=100% then…

Downloads
449
Likes
18
Rating
5
P
Printablesquietmesh

Shooting targets for airguns - Fits standard 140x140mm target holder

Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!

Downloads
437
Likes
77
Rating
4.5
P
Printablessquirrelf3d

Dual linear rail mount MGN12H - Ender3pro, 3v2 and 3max (and other with 40x40 Y profile )

You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…

Downloads
434
Likes
90
Rating
5
P
PrintablesAlex

Swivel Joint for 40x40 Aluminium Extrusion

I printed the parts with Prusament PETG (PLA works just as well). The sides I printed with .15 layer height to get clean holes. For the rest I choose .2 layer height. The pins could be inserted as an anti rotation lock. The side to side…

Downloads
429
Likes
111
Rating
0
P
PrintablesAaron

Audio-Technica ATH-M40x Swivel and Yoke Replacement

While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke,…

Downloads
423
Likes
22
Rating
4.5
P
PrintablesDrevil

Ender 3 S1 Fan Mount & Duct (Stock 40x10 Radial Blower Fan)

Ender 3 S1/Pro/Plus Sprite Fan Duct A specifically designed Sprite Extruder Fan Duct to suit the Ender 3 S1 series 3D Printers . This Fan Duct component is a low-level upgrade that addresses the factory inability to a clear view from the…

Downloads
422
Likes
66
Rating
5
P
PrintablesKisolov

Sound moderator 40x100+

Warning: Do not use a printed tube to make a moderator. A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers…

Downloads
411
Likes
46
Rating
0
P
PrintablesBlubber

Drybox / Silica Box 20x40x80mm

Prints fast and with not much material. Holds enough silica to maintain a single spool

Downloads
403
Likes
59
Rating
5
P
PrintablesThimira

Fan Bracket for LSI 9207-8i with 40x20mm Fan (NF-A4x20)

This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…

Downloads
383
Likes
36
Rating
5
P
Printablessuit

Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan

Print from a temperature resistant material, PLA is not suitable - use PTEG, ASA or ABS for example. Note: measure your heatsink, the older models are 18 mm wide, the newer models 20 mm

Downloads
375
Likes
50
Rating
4.25
P
PrintablesRobin Hielscher

5 Photo Litophane Box - 140x140mm

I wanted a box with a clean look that presents the litophane prints nicely by giving them a backlight. The box could also be used as a nightlight. One side has a round indentation to feed a cable through. In the pictures you see me using…

Downloads
371
Likes
68
Rating
5
P
PrintablesKuzzy3d

Ender 3 V2 40x40 Extrusion End Cap

designed for the ender 3v2 but should fit any standard 40x40 extrusion. 3pcs required. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20 Filament: PLA+ Notes: nozzle temp - 205 bed…

Downloads
369
Likes
23
Rating
5
P
Printableskwik

calibration cubes xyz (20x20, 30x30, 40x40, 50x50)

Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.

Downloads
368
Likes
9
Rating
5
P
PrintablesWilko

Angle Connector (40x40x40x5x5)

Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…

Downloads
365
Likes
74
Rating
5
P
PrintablesWiischke

Gridfinity Baseplates for IKEA Malm Drawer (40x55cm small version with 2 drawers)

These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…

Downloads
358
Likes
52
Rating
4.67
P
Printablescrisbal

Anbernic RG40XXV Stand (3 Variants)

A simple stand base for the Anbernic RG40XXV. (3 variants: simple, "RG40XXV" inset text, "RG40XXV" outset text). In the picture you can see it printed in White PETG (PLA works too), 0.15mm layer height (you can go higher but you will get…

Downloads
358
Likes
29
Rating
5
P
PrintablesLWC

PVS D.A.R.T. 1 (Direct Action Reconnaissance Thermal) 50fps, 640x512, 1:1 monocular

UPFRONT: C6 Core was just released and the link updated! listing is still in screening process and should be accessible from 20.06.26! Core arrived and its a worthy sucessor to the P6 providing an even better less grainy picture with high…

Downloads
356
Likes
56
Rating
5
P
PrintablesBKG

10 inch 40x40 Fan Panel - 1U - LAB RAX

1U panel for 4 40x40mm fans I used M3 counter sunk screws and flansh heat inserst as the “nut” Compatible with LAB RAX

Downloads
355
Likes
63
Rating
5
P
PrintablesMuffelkraft

Slotted Cable Tray (40x40)

This 3D-printable cable tray is designed for effective cable management in DIY CNC electronics enclosures, workbenches, or general wiring setups. It features a compact design and easy-access slots for organized cable routing. Features: ✅…

Downloads
340
Likes
49
Rating
5
P
PrintablesFridi

Mounting bracket 3 sides-40x40x25x5

Mounting bracket 3 sides-40x40x25x5 ca.: 40x40x25 PETG 0.4mm Nozzle ca 50min ca.: 4,4m Filament no Supports 50% Infill

Downloads
338
Likes
129
Rating
0
P
Printablesmmuellerphoto

Cable Channel 20x30, 30x30, 40x30, 50x30 - Different Length

Cable Channel: - 20mm x 30mm, 20mm up to 320mm length in 20mm increments, 20mm Clip - 30mm x 30mm, 20mm up to 320mm length in 20mm increments, 30mm Clip - 40mm x 30mm, 20mm up to 320mm length in 20mm increments, 40mm Clip - 50mm x 30mm,…

Downloads
335
Likes
100
Rating
5
P
PrintablesMonson_Makes

IKEA SKADIS PEGBOARD 240X200X5

Bigger is better, amiright?

Downloads
331
Likes
91
Rating
0
P
PrintablesKalleKnall

Fan grill for noctua 40x40

A flat fan grill for noctua 40x40

Downloads
331
Likes
42
Rating
4.86
P
PrintablesNodus Design

Hinge 40x60 and 24x40

Welcome to another functional design by Nodus 3D . This Heavy-Duty Hinge Set is engineered for maximum strength and smooth operation. Designed precisely in Fusion 360, these hinges feature countersunk holes for a flush, professional…

Downloads
329
Likes
116
Rating
0
P
Printablesjacekpom

40x40 mm cube test

a cube that will allow you to calibrate the printer for filament extrusion

Downloads
327
Likes
6
Rating
0
P
PrintablesKel-Morian

40x40mm endcap for Ender 3 Pro

Here is a 40 x 40 mm end cap for the Ender 3 Pro, being placed in place of the fixings of the original screen. I created it after purchasing a Creality touchscreen. It fits perfectly and does not move once in place. Rafts: No Supports: No…

Downloads
319
Likes
43
Rating
4.25
P
PrintablesDorkvader97

Nozzle Holder with Handle Insert/Endcap for 40x40 Aluminium V Slot Extrusion

A Nozzle Holder that that fits inside a 40x40 Aluminum V Slot extrusion. Common on many Printers ( Ender 3 + Clones ). I remixed this because I wanted a handle to be able to open the drawer easier, of course it HAD to be in the shape of…

Downloads
303
Likes
60
Rating
4.8
P
PrintablesPowerplay

Alu Profil 40x40 in Kunststoff

Da ein User hier nach einem Alu Profil gefragt hat habe ich einfach mal eines gezeichnet und hier für euch hochgeladen. Ob sowas Sinn macht ist die Frage aber das dürft ihr selbst entscheiden. Das ganze im Slicer einfach auf die…

Downloads
302
Likes
22
Rating
0
P
PrintablesD3Xt3R

HSW Holder 40x40x70mm

This is a remix of LordDenos original HSW Holder but with 70mm height

Downloads
295
Likes
46
Rating
5
P
PrintablesPolyGone

40x10 Cable Duct for 4040 Aluminium Profile

This is the 40x10 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Due to the minimal height it might be a bit hard to remove once it's clicked into place. Also see my other models for…

Downloads
291
Likes
43
Rating
0
P
Printablesjzmuda

TFT LCD Display Housing TZT 240x320 2.8" SP

The housing was designed for a 2.8" LCD display. In the device under construction, simply cut a 52 × 90 mm opening and attach the housing using double-sided tape or plastic adhesive. The inserts used are M2.5 × 4 × 3.5. I printed the…

Downloads
278
Likes
17
Rating
5
P
PrintablesDavid_liao

40x40 fan grill

As title Category: 3D Printer Parts

Downloads
261
Likes
9
Rating
5
P
PrintablesOliver Martens

simple Mousepad for Simrig (40x40 or 80x40 Profiles)

Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.

Downloads
261
Likes
35
Rating
5
P
PrintablesFsiaux

RG40XXV Rugged Box

I more or less frankensteined the original model until it fit the RG40XXV. The hinges are a little tight so take your time installing the screws. Check out the photo for screw size. Print using a brim as well worked for me.

Downloads
258
Likes
22
Rating
5
P
Printablesfersanhu

Aluminum Extrusions Profiles 20x20 30x30 40x40

diversos modelos todos d e 200mm, si necesitas una longitud diferente no dudes en pedirla.

Downloads
257
Likes
23
Rating
0
P
PrintablesDantak

Basic set of inserts for cantilever tool sewing box 240x205

Basic set of inserts for 240x205 variant Top and middle inserts are third of the width so you can combine them however you want. Screw inserts are meant to be used together. All inserts have 45° chamfer so you can take them out and for…

Downloads
255
Likes
68
Rating
5
P
Printableseurad

Prusa i3 MK3S+ Extruder Stepper Cooler Add-on for 40x40 Fan and PC4-M10 Connector

This is a remix of Prusa i3 MK3S+ Extruder Stepper Cooler Add-on (for 40x40 Fan) by Strathpeffer3D with an added thread for a PC4-M10 pneumatic connector and updated for MK3S+. MK3S and MK3S+ have different FS-Cover slots (thx to HayaMini…

Downloads
254
Likes
59
Rating
5
P
PrintablesBasementLAB

2020 Corner bracket (Angled Triangular Prism) 20x20 - 40x20 - 60x20 - 80x20mm

2020 Corner bracket (Angled Triangular Prism) 20x20 - 40x20 - 60x20 - 80x20mm Spec: Hole diameter 4.2mm (M3-M4 Socket Head) Slot 8.5x17.2mm Suitable for: 20x20mm extruded aluminium…

Downloads
249
Likes
45
Rating
0
P
PrintablesAstupidmoose

Gridfinity -40x Mini Spool Swatch Rolls

I didn't feel like I needed the sealing box, but liked everything about this design, so I dropped the design into a 3x5 gridfinity drawer, while expanding the spool count from 27 to 40.

Downloads
248
Likes
56
Rating
5
P
PrintablesMM Bavaria

SATSANA Remix for Creality CR-10 / Ender 3 Micro Swiss Direct Drive + BLtouch + 40x40x20 Fans

Is a remix of https://www.thingiverse.com/thing:4408571 . Fan duct for Creality CR-10 / Ender 3 printers with Micro Swiss Direct Drive Extruder. Suitable for 40x40x20 fans and BL-Touch. BL-Touch offset X=-46 Y=-9 The holes for the fans…

Downloads
247
Likes
29
Rating
5
P
PrintablesMeshNRW

USB-C Ventilator for 40x40 Mini-Heki in Camper/RV/Motorhome/Van for Camping

English (Deutsch weiter unten) A fan that fits into the Dometic Mini-Heki (40x40xm). Inside width: 382mm. Printing: Print in ASA or ABS only, for temperature stability. Required parts: 2x Corsair RS140 MAX 140mm ( Link ) 1x PWM Fan…

Downloads
242
Likes
65
Rating
4.33
P
PrintablesTom Sender 2007

Aluminium profile 40x40

The screws needed are M5 x 0.8 screws. The profile is 40x40mm wide and the openings on the side are each 10mm wide. U can connect several units via M5 x 0.8 threadrods.

Downloads
241
Likes
36
Rating
0
P
Printablesjpb123

40x AA Battery Holder square design

just a simple AA battery holder with a square design

Downloads
240
Likes
21
Rating
5
P
PrintablesDaisbear

90 degree Angle Bracket 40x40x20mm

Customized version of https://www.thingiverse.com/thing:2430655 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2430655 Print Settings Printer: JGAurora A5 Rafts: No Supports: No Resolution: 0.2 Infill:…

Downloads
240
Likes
14
Rating
0
P
PrintablesDaki3D

Winkel mit 5er Bohrung / 40x40x5 / Angle with 5 hole

Da gibt es nicht viel zusagen. Die Bilder sprechen für sich. Es kann mit jedem Filament gedruckt werden. Der Winkel ist vielseitig einsetzt bar.

Downloads
238
Likes
12
Rating
5
P
PrintablesKvalheimaren

Endcap for Alu Profiles 40x40/80/120/160

Endcaps for aluminiumsprofile 40x40, 40x80, 40x120 and 40x160

Downloads
235
Likes
32
Rating
5
P
PrintablesSknown

Snap on Hanging Hook for 40x40mm T-slot(10mm) Aluminum extrusion box frame

Single hook fits aluminum frames with a 40 x 40 mm, 10 mm T-slot. The test lead folder is placed in the slot and then rotated to hold. It can be made without support if it is printed horizontally.

Downloads
234
Likes
31
Rating
5
P
Printablesgapx

WX-DC2412 Enclosure - Box - Case - XT60 - IEC320 C14 - Fan 40x40x10mm

Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…

Downloads
232
Likes
16
Rating
0
P
PrintablesJosef Baber

optimized very Strong Corner Bracket/Winkel for Aluminium Extrusion Profiles ITEM in 40x40 M6

Hello, this is an optimized very Strong Corner Bracket/Winkel for Aluminium Extrusion Profiles like ITEM in 40x40 size with holes for M6 Screws. I optimized the structur to have the strongest layer lines, how you can see in the pictures…

Downloads
225
Likes
23
Rating
5
P
Printablestlum00

Simple Box - 8000 different Sizes - 40x40x10 mm up to 150x150x150 mm - Wall thickness of 3mm

Customizable Sizes for Every Need My boxes come in a wide range of sizes to suit different needs. They are available from a compact size of 40x40x10 mm to a larger size of 150x150x150 mm. These boxes are provided with increments of 5mm,…

Downloads
225
Likes
16
Rating
5
P
PrintablesVilius

Ender 3 v2 Mainboard / motherboard cover with 40x40x20 fan

Mainboard / motherboard cover for Ender 3 v2 with 40x40x20mm (4020) fan. You can use a 4010 as well without printer risers. Fan mounting M4, cover mounting uses stock mounting holes and hardware. Supports are optional. Pictured white…

Downloads
224
Likes
26
Rating
3.5
P
Printablesjzmuda

TFT LCD Display Front Panel 240x320 2.8" for 80*170*130 DIY Case (YoRadio)

The panel is designed to be mounted in a DIY metal housing with dimensions of 80 × 170 × 130 mm. It is intended for use with a TFT LCD display TZT 240×320 2.8" SP and an encoder or potentiometer. I created the panel with the YoRadio…

Downloads
222
Likes
16
Rating
0
P
PrintablesCarrier

40x40 Fan Cover (Flat Side)

Well I really like these "propeller style" cover so I've decided to print them... but then, I found on my CR-10 V3 that I have a problem. Simply put, when my printer auto homing X axis, it's in collision with arm cover. So I had to create…

Downloads
222
Likes
15
Rating
4.25