157 models
This is a scale update remix which resizes a Tacoma center console insert to fit a Toyota 4Runner Gen5. There are 3 different variations. One is a single tray. Another is the same tray, but with a center divider and coin holder. The last…
Print approx. €6.84–€8.36 excl. taxPreliminary estimate for one variant
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
I took phiba's radio mic mount, and merged it with a switch model by 1DDesign. I wanted to put a mic holder into the dash to replace a blank switch. I added some supports to the switch in all corners, and connected them together with a…
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
I remixed this to fit a GMRS extension RJ45 (CAT5) cable that's routed from the arm rest through the panel...I resized this to fit the smaller port in the bottom, and added two cutouts: pass through for CAT5 Cable for install larger hole…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Traveling friend needed a cup insert fix for her vehicle. I found two designs available online but each of them had problems with fitting and features. One design had rounded inserts for the cup holder, my friend's 4th gen had a rounded…
These mounts allow the replacement of the stock dash speakers with 3.5" aftermarket speakers. I designed these around the Infinity Reference REF-3022cfx 3.5" speaker - compare your speaker specs to these to see if the mount might work for…
Printable drawer for bottom cubby in 5th-Gen 4Runner center console. Supports recommended for the pull handle only Recommend adhesive-backed felt on the bottom and rear corners for best fit. RAM ball variant available here:…
All files are uploaded in .3mf formats only. You can get separate the individual bodies as needed from this file. Source files are not available due to IP theft prevention. You can request modifications in the comments if necessary. All…
For those of us with a 5th generation 4Runner, you know that little cubby space by the shifter is not very useful, because stuff flies out. I made a little cubby drawer that will fit in that space, that is held in place by friction. This…
This is a dashboard switch-hole cover plate for various older Toyota trucks and SUVs. The original came from the other thingi site, item number 2446920 by bgsteveg . I improved it by adding some gussets to keep the tabs from cracking off.…
Replacement pulls to release the rear seatbacks.
This is a model of the small plastic grill clip used to secure the grill onto the front of various Toyota vehicles. Based on the description of the part it may also be used in the interior. The model isn't an exact copy of the original as…
Toyota 4runner gen 5 cubby drawer
There are two versions of the model. One is just a blank for the center console. The other is for a flush mount USB port. Models are set in the correct printing orientation. The clips do not need supports. For the USB model use the in…
Update: Fixed slope on top of cup holder to better print upside down; the original model has stringing around the inner rim due to the gradual slope. Original model is great, but needs to be larger to fit. The model in this post is 101%…
Yet another Toyota 4Runner Hitch Cover - this one has a hole so it can be secured with a 5/8" hitch pin. This is a dirty remix of the original model. It's “dirty” in that I just grafted an extension on without a whole lot of regard in…
The 5th gen 4runner has been in production for a long time and dont have a normal spot for phone especially a big one. it always ends up falling or getting stuck somewhere so i made this to help. Designed to printed without supports so…
To be used with factory rubber inserts, the insert for the 12 oz can will work just fine with the 8.4 oz can. If you like the better fit and are exclusive to the 8.4 can print the one for 8.4.
Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…
Allows the lid of the center console be useful space.
This will fit in the switch blank locations on many early Toyota models including the 1st Gen Tacoma, 3rd Gen 4Runner, and Toyota Pickups (plus others). Fits one standard size Bic lighter.
This is a switch plate for the cubby area of late 3rd Gen 4Runner center consoles('98-00 I believe). This print is for any late 3rd Gen 4Runner center console, whether you just want more switches available or you swapped to the new…
This is a Center Console insert for a 5th Gen 4Runner. I have it in a 2022 but should fit other years. Added Sasquatch for the kids. Only use PETG or ABS. Follow directions for your favorite filament.
Provides a place to store the rear headrest when the rear seat is folded down. Can also double as a light duty handle for help getting into the vehicle. Printed in matte black PLA. Not sure how well it will hold up to summer vehicle heat,…
This is version 1 of a cup holder that I did for my 4Runner. I didn't care for others that I had found and printed. It was designed to hold Yeti coffee mugs 20-30 ounces and 32-44 ounce Styrofoam cups. The cups are spaced far enough apart…
Can be used as a badge on a 4Runner, also included a file with the letters separated. I printed it in PETG as 4x1x.12in.
Toyota 4Runner 5th Gen vent solution. Off road your 5th Gen 4Runner without a stock bumper? Finding the interior dusty after a day on the trails? The vent solution is for you. Print a diver and passenger side cover. Glue them to the stock…
Part may be compatible with other Toyota models with Instrument Panel Cup Holder Toyota Part Number for the cup-holder assembly: 5562035050 CupholderArm_L: Refers to the arm on the Left as viewed by the driver (as shown in cover photo).…
I printed with supports for ‘build plate only’ to support the tabs on the top of the model. I would also suggest printing in PETG, PLA will work, but if you live in a warmer climate (like the Southern or South Western United States) the…
The main deflector design allows for use of at 1 ½" duct hose or the secondary deflector. The duct hose option can be used for a more precise redirection of the air, such as towards a rear facing car seat or a pet kennel. The mating piece…
Consol Bezel for the 1st Gen Toyota 4runner (and likely pickups). It is not an exact replica, but it fits well. Deletes the 12v cigarette lighter plug. Step included, please attribute any remixes or sales. (CC-BY). Bambu suggests laying…
Back by popular demand! Originally produced in 2020, the “Clock Block” as some call it is a way to get rid of your 20+ year old clock on late model 3rd gen 4runners and replace it with a convenient place to put your phone. Unless the…
Replacement fuel spring clip for a 3rd generation Toyota 4runner. This model is the plastic portion the fuel door. Initial print was in PLA, but warmer weather will warp PLA over time. Petg is preferable in this case.
Here are the inner fenders i used on my xtra cab build. Mirror for the other side. printed at .2 in PETG. These stop right at the bottom of the grille. These work on both the standard and LWB TF2 chassis. Let me know how they work for…
This is the dashboard switch cover. The model is designed based on the original cover from my 2002 Toyota Tacoma. It should also fit Hilux/4Runners/T100 as well. I've pictured the printed version next to my original one. To withstand the…
This is a remix of Pappadakko's redesigned dashcam mount for the 5th-gen 4Runner to work with the U3000 rear camera. I printed it in ABS to help prevent warping from heat in the summer. I recommend installing the camera on the…
Should print fine without any supports. I used PETG for mine.
I bought a 2-channel dashcam for my 4runner and I was left feeling that the methods for mounting the rear camera were wanton. as such, I created this attachment for the rear camera that places it very near the glass and exactly in the…
Modeled this after an OEM Toyota badge for a 1987 Toyota 4Runner. I used threaded inserts with M5 bolts in the factory location to mount this to my grille.
Diseño El modelo 3D de un Toyota 4Runner 2008 capta fielmente los detalles distintivos del vehículo real. Uso Ideal para coleccionistas de vehículos en miniatura y exhibiciones de modelos de automóviles. Sugerencias de Impresión…
Adapter for 5th gen 4runner 6 1/2 in speakers for back hatch. It fits into a 2011 4runner but I imagine it should fit any 5th gen as well as other speakers as long as they're the same size. Print in PETG or ABS or similar high temp…
The clip that was included with my garage door opener did not fit well anywhere in my 4Runner. I combined a clip with a blank switch plug to create a custom mount that integrates well. I replaced the blank to the lower left of the…
Replacements for the thin rubber strips originally glued to the underside of the battery hold down bars on the 3rd Gen Toyota Hilux-Surf along with 4runners & Tacomas of similar vintage. May also fit earlier/similar models but you would…
Toyota 4Runner 5th Gen, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
This is a deeper model that I just made. It has a slanted floor to hold your glasses to the rear. You can put your glasses or coins in here to keep them in place. The side with more depth goes towards the shifter. I put a thin piece of…
3rd Gen 4runner rear ashtray blankout plate with mounting holes for a generic USB charger outlet. I included the Scad file so it can be adapted to mount whatever. Center hole is standard size for 12V power port. Affiliate link to USB…
Designed for PLA or PETG 40mm x 115mm x 4.5mm
I needed a quick place to put my Sun Glasses on the console, but the 5th does not have one. So I made this. Nothing fancy, but does the job. You can put your glasses or coins in here to keep them in place. The side with more depth goes…
Edited model to better fit my 4Runner (5th Gen) and my iPhone 15 (with case).
I added an Add-a-Fuse tap for a dashcam but couldn't replace the fuse box cover. I also didn't want to cut up the OEM part, so I made a reasonable facsimile and Dremeled out a hole where my tap goes. Sure, you could extrude a hole, too.…
A 3D-printable shell for older Toyota key fobs, designed to fit tight around the original. All buttons are available as well as an opening for the broken plastic ring part. One part is just the fob, the other has little angels on the…
Couldn't find any decent fitting cup holder inserts for the 4th Gen 4Runners so I decided to scan and make my own. I'll probably be updating this when I get more time to tinker with the fit around the chamfered area though for now this…
This is a custom 3d printable centre console for your Gen2 Hilux/Surf/4runner. !Disclaimer! this is based on a manual swapped R151F gearbox Gearbox depicted and modelled around has had the transfer case shifter swapped with the A343F…
Center console hinge limiters for 3rd generation 4Runners. Drivers side provided. Mirror the part in your slicer for the passenger side. Toyota part numbers: 58964-16010 5896416010 58965-16010 5896516010 Category: Automotive
Toyota 4Runner 4x4 Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
While waiting in the car for my daughter at various functions, I wanted a place to put my phone, so I designed this holder specifically for our 5th Gen 4Runners - we have 2.
Chassis kit: https://www.axialadventure.com/product/1-10-scx10-ii-4wd-raw-builders-kit-v2/AXI90104V2.html Body kit: https://store.rc4wd.com/RC4WD-1985-Toyota-4Runner-Hard-Body-Complete-Set_p_7220.html The rear hinge comes in 2 parts. Use…
This is a replacement for the stock part 55620-89103 . It uses the original carriage for the cups and the s shaped bar. I have confirmed the design fits and the cup holder works. This design improves on the locks in the back by using…
Add wireless charging to your 4th Gen 4Runner (2003-2009)! Fully assembled kits and/or printed parts can be purchased on Etsy . There are two options with this design. You can have 1 or 2 chargers in the center console. It is designed…
Microphone mount for 5th Gen 4Runner: -Replaces OEM microphone in overhead console -Designed to fit Kenwood aftermarket microphone such as p/n ZYW3967-339 The mk8 file is the latest version, and the microphone passes through the bottom…
Perfectly modeled to replace the tissue box holder in the lid of the 5th generation 4Runner center console. To remove the existing tissue holder: Release the bottom tabs from the tissue box holder using a pry tool (or really your hands…
I used PETG as I'm hoping it will better survive distortion from summer temperatures, but I also tried PLA and the part is more than strong enough for the possible abuse it will get from my dog. Printed on edge (cable cutout down) using a…
Can be used if you have a switch you'd like to install but hate drilling through those weak ass stock blanks.
this is a car model for a keychange Enjoy!
Not sure what other model years this fits, it was designed for a 2023 4Runner. This is for the interior fuse panel located under the drivers side dash allowing you to add a fuse tap for accessory wiring and keep your factory fuse cover. I…
It uses M6 hardware for the front plate and fits RAM ball RAP-B-354U-TRA1. I used Cat tongue tape on the bottom, center, and corners to keep it from sliding out,
Want to add a little pop of color inside your 4th generation Tacoma or 6th gen 4Runner? This model replaces the blanking plug covering the small dash cubby on the drivers side, have a little fun with your color choice and even a custom…
Should work on any vehicle which requires an 8mm wrench to remove the antenna.
Toyota 4Runner 4th Gen vent solution. Off road your 4th Gen 4Runner without a stock bumper? Finding the interior dusty after a day on the trails? The vent solution is for you. Print a cover and filter retainer for both sides, glue them to…
Molle panels for your 5th gen 4runner. Print in a material that can withstand heat, it's in a car and will get hot. PETG for 3 months and had a few 100 degree outside temp days, no issues with warping on the panels. These are not designed…
Replaces the removable plastic divider. Has circular holders for s Streamlight and a bottle of spray hand sanitizer.
These are for driving in the cv axle seals on a 3rd gen 4runner. Since there isn't a natural stop for the seals, it is easy to drive them in too far (ask me how I know). These will bottom out on an outer lip at the correct depth. I…
Toyota 4Runner 4th Gen vent solution. Off road your 4th Gen 4Runner without a stock bumper? Finding the interior dusty after a day on the trails? The vent solution is for you. Print a diver and passenger side cover. Glue them to the stock…
Please take the time to watch my YouTube video that I created for this template! Your continued support is what makes this all worthwhile! So please Like, Subscribe, and Comment on the Video! Keep the dream alive!!! VIDEO LINK: Link to…
Toyota Hilux/Surf/4runner Gen2 cup holder to fit the factory centre console that can hold 2x drinks, 2-3 rocker switches, USB charger and a phone holder cupholder has 2 variants (only difference is with switches) fit 3 rocker switches and…
Behold. 4Runer magsafe holder for iPhone. Design assume you have wireless carplay and just need a place to put a phone. Inserts into existing “pocket” and retains it functionality (to some extent). Accommodates regular and “MAX” iPhone…
I realized after printing this that I made it to small, at 150% scale it's pretty much perfect so I'd recommend that or higher.
When I went to install an Atoto A6 (Double din touchscreen) stereo, I noticed there was gaps on the side due to the width of the original head unit. I did a quick google search for solutions, and only found one, so decided to whip this up…
Wrench to remove the weather cap when replacing the low beam bulbs on a 5th-gen 4Runner. The orange model in the photos was the prototype - red is the final design. Holes are for a screwdriver shaft to gain extra leverage if needed
I made my own adapters to better fit my use case on my 2024 4Runner for my C2-690tx speakers. The same adapter can be used for both front doors. The only difference is the CCF ring for each location. On the front doors, the inner door…
While installing a new regulator a small plastic piece associated with the rear glass regulator locking mechanism broke. A replacement part could not be sourced and being one piece would be impossible to install without destructive…
Please share your makes I would love to see how your came out, and tell me if there is anything wrong with the model.
I followed the information in this forum to add a rear window rolldown switch to the hatch of my 2002 4Runner. I used a factory rear window switch from the front of a 3rd gen 4runner. However, it was too long to fit, so I designed the…
TOYOTA 4Runner Rear Emblem for 1/10 RC. Scale size may not be accurate. Even with 0.2mm nozle, it is quite difficult to print by FDM printer. Maybe, good to use rasin printer for better print.
I designed these grates for my 1st gen 4runner that had cracking/broken grating on the rear compartment doors. So I decided to create a YouTube video on the initial idea, the process of design, and making the parts. Would love any and all…
Printed in PC-CF for a friend. Wanted to share it with you all.
This is a mount I designed for the Scangauge II. It was sized to fit on top of the steering column of a 5th Gen Toyota 4Runner, but it may work with other vehicles. The housing has a slight taper and stops in the rear corners to locate…
Made for 2002 4runner. I believe it will work for other model years but have not tested.
Re-uses vehicle hardware to mount to the rear privacy screen mount. Also needs a 9" TitanStrap or equivalent utility strap. https://titanstraps.com/products/titanstraps-utility-strap-9 . Ladder sits against rear seat latch and rests on…
This mount is for a Wolfbox upgraded rear view camera ( https://www.amazon.com/dp/B0B1LLMCS9 and https://www.amazon.com/dp/B09KRM9QQ5 ). It mounts under the 3rd brake light on a 5th Gen 4Runner (2018). I would suggest using ABS. I also…
Small dial/knob for A/C temp setting in 2002 Toyota 4runner
Updated file provided by the guys on the 1st GEN 4RUNNER MAFIA Facebook group! Matchbox 4Runner Roll Bar 003C.stl ←download this one, it's a lot cleaner Made 100% by eye, most definitely will not be dimensionally accurate also I'm not…
I remixed the original to better fit in my 2024 4Runner for my C2-650x speakers. The same adapter can be used for both rear doors and both speaker positions in the rear hatch. The only difference is the CCF ring for each location. The…
Prevents damage to the valve stem from loose rocks. OEM valve stems can be easily damaged. OEM TPMS sensors are one piece and stem replacement is impossible without replacing the entire sensor. This cap directs the force from an impact…
Coworker liked Jared Lundholm's Cup Holder but wanted a way to secure it to the coin compartment. I 3D scanned and made a simple insert, I used 80mil VHB to connect the cup holder to the base - so it sits secure and prevents any shifting…
The OEM rubber material goos up in a few years and jams the switch, and is sticky to the touch. Yuck. Print this in TPU, which should have a much longer lifetime. I use NinjaFlex TPU Filament…
I have a Toyota 4Runner. In the rear cargo area, there is a roll up cargo cover to hide stuff in the back. The handle to that broke (cracked)…. so I designed this replacement. Additional Parts to install: 4 bolts + Locknuts. Note: I…
I made a replacement divider for my 4runner center console cubby. There are tracks with a 3 degree angle that are factory - these slide right into those. Recommend ASA, ABS, or something that can withstand the heat of a car baking in the…
I had created a Similiar mount but with one arm and it was wobbly. So this is my attempt at a vibe coded dual arm 5th gen Toyota 4runner phone mount that fits in the center cubby. It maintains storage space but provides a convenient spot…
