Search results: 4x

Sort order

2,647 models

P
PrintablesHector

Nasa chainmail (4x4, 8x8, 12x16 and 32x34)

Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
67,229
Likes
13,125
Rating
4.86
P
PrintablesForker45

PS4/PS5 Simple Case Holders 10x | 12x | 14x

I needed a game case holder for 14 PS4 cases but only found designs to hold 10/12 cases on here & Thingiverse. I didn't want to print multiples or consume the time/material required for existing case designs, so I made my own. This holder…

Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,859
Likes
295
Rating
4.81
P
Printables3D Sets

Model 1: Rancher 4x4

Rancher 4×4 – 3d printable set of parts for your 3d printer. Model is approx. 53 cm long (1:8 scale) and is prepared for your RC equipment. You can buy this model on www.3dsets.com What you get: 3d printing files: .stl and .gcode…

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant

Downloads
1,815
Likes
657
Rating
5
P
PrintablesGuido666

Battery Dispenser - 24x AA - Stackable

I wanted to improve on the capacity, jamming issues, and printability of the Stackable Battery Holders by adoniram, and this is what I came up with. This model is stackable, prints in 2 pieces, and holds 24x AA batteries. It also has…

Print approx. €11.39–€13.92 excl. taxPreliminary estimate for one variant

Downloads
1,238
Likes
167
Rating
4.48
P
PrintablesIllia Shekera

Gridfinity Pen/Sharpie Stackable Tray 4x2x4

Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design

Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant

Downloads
839
Likes
104
Rating
4.89
P
PrintablesAKIINT

Maze 54x44 square cells, center start

I present to you a 54x44 square cells, orthogonal maze. You have to start from center and the exit is at the bottom. The maze is a little bit hard to solve, but the time to solve it is worth it. The total maze size is 240x200x11mm. There…

Print approx. €6.63–€8.11 excl. taxPreliminary estimate for one variant

Downloads
401
Likes
127
Rating
5
P
PrintablesKeldor

Gridfinity 2x4x6 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
365
Likes
61
Rating
5
P
PrintablesLukáš Foukal

Snowplow for 3dsets Landy 4x4 with height adjust

This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
240
Likes
47
Rating
5
P
PrintablesJoseph Marlin

4x3 Gutter Downspout End Cap

4" by 3" gutter downspouts from Lowes are great if you're looking for hydroponic nutrient film technique (NFT) growing channels. However, it comes with the challenge of closing off one of the ends. This is my solution. A very simple end…

Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant

Downloads
239
Likes
37
Rating
0
P
PrintablesKeldor

Gridfinity 4x4x6 HexBin

A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…

Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
53
Rating
0
P
Printableshbertsch

Oral-B iO stand with 4x brush holders

Got sick of the toothbrush falling down from its base and designed a stable stand with holders for the brush heads . Unfortunately Oral-B designed the brush heads very poorly so they cannot stand on their own and always have be be laid…

Print approx. €4.78–€5.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
182
Likes
18
Rating
5
P
Printablespressi

Print approx. €4.44–€5.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
21
Rating
0
P
Printables3DReady

LEGO 4x2 Fondant Mould/Forma do LEGO 4x2 z Fondantu

Forma służy do uformowania klocka LEGO 4x2 naturalnej wielkości. Dzięki dzielonej formie gotowy klocek można łatwo wyciągnąć. Gotowy klocek możesz pomalować pisakami spożywczymi. Pamiętaj!!! Do wydrukowania formy wykorzystaj materiał…

Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
23
Rating
5
P
Printablesmado30

Stand for Kyosho Mini-Z 4x4

This is a stand for Kyosho Mini-Z 4x4. Ein einfacher Ständer für Kyosho Mini-Z 4x4.

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
97
Likes
9
Rating
0
P
Printablesromankozak

Dukedoks Cramer Truggy RC 4x4 front top cover

I saw that the screw holes on the TPU Chasis Front Bridge on my Cramer Truggy were getting a beating, so I thought I'd make a cover that would protect the screws holes and look good at the same time, similar to the rear spoiler. PS: I…

Print approx. €0.90–€1.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
89
Likes
21
Rating
0
P
Printables3DP-MAMSIH

Wheel Base Rancher 4x4 Beadlock

Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets

Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
24
Rating
0
P
Printablesklaiberadvisory

Gridfinity Frame 4x5 with Spacers for 23.5x38cm Drawers

I added spacers to a 4x5 Gridfinity Spacer to fit into a Bisley Style No Name Desk Cabinet with 23.5 x 38 cm drawers (inside Measure) You need two of those Grids to fill the drawer. My first model/remix so feedback is very welcome

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
21
Rating
4.5
P
PrintablesDusBus

Gridfinity - 1x8 - 4x ruler holder

A handy solution for your rulers. It's not fancy, just practical. Holds up to four rulers, max size 37.5cm*2.5mm. Be aware that it won't fit on your regular sized (MK3/MK4) print beds. I have included a pre-cut version with dowels. Needs…

Print approx. €8.88–€10.85 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
9
Rating
4
P
PrintablesL7899

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
10
Rating
0
P
PrintablesSilverBullet126

Hobbywing Max10 SCT Mount for Traxxas Stampede 4x4

A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
4
Rating
5
P
PrintablesSebWer

Space Empires 4x Replicators insert

Hi, I designed this insert mainly for Space Empires 4x expansion Replicators to keep terrain hexes and sleeved cards also from Close Encounters. I printed it in draft presets, means 0.3mm layer, nozzle 0.4mm. Insert bottom thickness is…

Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
2
Rating
0
P
PrintablesCJ

64x64 Matrix Display Raster

The idea is to separate each pixel into it's own "box" this in combination with a diffuser sheet or transparent paper, gives a nice “boxed” effect for each of the 4096 led's. Beware you are not going to print the object, you are going to…

Print approx. €4.04–€4.93 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
4
Rating
0
P
PrintablesUca

Sensirion SHT4x & Round Thermometer / Hygrometer holder for Prusa MK4

In order to know the accuracy of my own thermometer/hygrometer, I built the holder 3Ds directly😊 The Sensirion SHT4x holder refers from https://github.com/Sensirion/smartgadget-sht4x-housing/tree/main/Housing . And the diameters of the…

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
53
Likes
4
Rating
0
P
PrintablesKeldor

Gridfinity 2x4x6mm BarBin

Tried to create a more robust design of a 2x4 gridfinity bin. If you need other sizes, let me know! The Bin is 2x4 Squares with a maximum hight about 6cm. The base is created with the gridfinity fusion 360 plugin from…

Print approx. €4.20–€5.14 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
10
Rating
0
P
PrintablesAwei

marker pen box 4x5

The Michael Pen Holder is compatible with Copico and Touch square pen barrels.

Print approx. €8.43–€10.31 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
4
Rating
0
P
PrintablesInfamy

High Capacity 3.5in HDD Adapter Bracket with M3x4x5 insers.

Remix of a High Capacity disk adapter but using the normal voron inserts.

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
36
Likes
6
Rating
5
P
PrintablesAinon3Dtisk

MK23 SOCOM Airsoft Suppressor 150mm M14x1L

Hi there, Here is an airsoft suppressor (150 x 40 mm) with an M14x1 LH (left-hand) thread. It fits any airsoft gun. It features the standard M14x1 left-hand thread found on all types of airsoft barrels. It fits perfectly and holds…

Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
5
Rating
0
P
PrintablesOBA

PG42 Blind Stuffing-Adapter to 4xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 4xPG9-Kabelverschraubung

PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-4)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
4
Rating
0

Camera Lens Cover Fits Kodak Instamatic 54X

I bought this camera at a yard sale, and it did not have anything to protect the lens so I made a quick model, added the logo, and printed it on my Prusa mini. Print with a 0.4mm nozzle for higher resolution.

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
3
Rating
0
P
PrintablesPapyjo

Lego pare brise vintage 4x3 45 degré

Il me manquait cet élément pour terminer ma vedette de police. Impression en PETG avec filament clear. Hélas la couleur et la transparence ne sont pas là, mais la fonctionnalité est respectée J'ajoute le fichier fusion si vous avez…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
3
Rating
0
P
PrintablesRoland Daum

Trondheim City Model 4x Z-Scale

Trondheim City model with 4x Z-Scale

Print approx. €12.14–€14.84 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
4
Rating
0
P
PrintablesNikorasu

The Ultimate Propeller Launcher w/ 64x Gearbox

This is a high-power flying propeller disk launcher, that uses a compound/stacked planetary gearbox with a ratio of 1:64! (x4 each layer) Video of it in action: The gearbox layers print-in-place, and are designed to easily assemble with…

Downloads
7,306
Likes
901
Rating
4.66
P
Printableskunaa

M4 hex screw and nut (M4x10, M4x15, M4x20, M4x25, M4x30)

Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA

Downloads
4,446
Likes
142
Rating
4.67
P
PrintablesRecticle

Airsoft Suppressor SOCOM 2 Series 14x1 CCW

Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…

Downloads
3,895
Likes
427
Rating
4.86
P
PrintablesCrosslink

IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…

Downloads
3,173
Likes
843
Rating
4.67
P
PrintablesGarth

LEGO Minifigure - 4x size

Update: I cleaned up the model and added multiple different sizes here . The new model includes part files which make it easy to customize. I made a LEGO Minifigure design to be printed at 4x size. Currently, all parts are press fit…

Downloads
2,561
Likes
346
Rating
4.8
P
PrintablesRamBros

G-Wagon - 3D printed 4x4 RC car (Chassis)

G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…

Downloads
2,514
Likes
512
Rating
3
P
PrintablesVegatype

Vega 4x5 View Camera

This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…

Downloads
2,308
Likes
440
Rating
4.85
P
PrintablesKevin Valverde

4x5 large format camera

Film photography has survived and thrived in modern times; I fell in love with film from the get go. Because of it’s capability to create high quality prints I was drawn to it, and this eventually brought me to the 4x5 format; an…

Downloads
2,067
Likes
612
Rating
3.75
P
Printablesthenickdude

Microscope adapter for 4x macro photography with Sony A, E/FE, Canon EF/EF-S, RF, M, Nikon F, Z, Fuji X, Leica L, M4/3, M42 cameras

This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…

Downloads
1,957
Likes
270
Rating
5
P
PrintablesLWC

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Downloads
1,844
Likes
1,231
Rating
5
P
PrintablesJamehz

Everdell Special Event Card Stands - 44x66mm

Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text. Any filament will do, and you will need a…

Downloads
1,828
Likes
234
Rating
4.93
P
Printables3D 2Lab

Desktop organizer - 4x11 marker organizer

The hexagonal side Size : 148.00*128.17*10.00 cm. The hexagon has 3 different faces, two smooth, two called "bottom" and two called "top", as in the image. When assembling the pieces, arrange both side pieces in the same way and as in the…

Downloads
1,742
Likes
883
Rating
4.78
P
Printablesk-eye

4x AA or 4x AAA Battery Case - Rechargeable - Akku - Eneloop

EDIT: Based on user feedback, I added a version with more tolerances on the hinges. Video on Vimeo: https://vimeo.com/687168699 A battery case for either 4x AAA (+1 AA) or 4x AA batteries! The case has a hinge on the back so the material…

Downloads
1,684
Likes
209
Rating
4.87
P
PrintablesK2_Kevin

Honeycomb Wall Gridfinity Shelf - 4x2

Gridfinity Shelf for the Honeycomb Storage Wall . I designed this to hold firm on your Honeycomb Storage Wall. Compatible with all your Gridfinity storage containers. Get your Prusameters… Post your Makes! If you like this project, please…

Downloads
1,608
Likes
561
Rating
4.91
P
PrintablesMarian Adam

Philips OneBlade Travel case with 4x3 magnets

this is a remix of the OneBlade travel case made by Andres. i just modified the magnet space to fit 4x3 or 4x4 magnets.

Downloads
1,511
Likes
714
Rating
4.67
P
Printableschal

Huawei Inverter SUN2000 Fanduct / 4x 92mm fans

You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)

Downloads
1,491
Likes
45
Rating
5
P
PrintablesEvan Dorsky

Paterson Reel for 4x5 Sheet Film (6 Sheets)

This is an easy-loading reel for developing up to 6 sheets of 4x5 film with a standard Paterson system. Sheets are slid in via the entry slots and are kept in place with keeper tabs on the top and bottom. This design was inspired by the…

Downloads
1,372
Likes
147
Rating
5
P
PrintablesMrStolarsky

Offroad 4x4 Recovery Boards

🆕 Available on Etsy, from me, with free shipping These are 1:10 scale recovery boards for RC crawlers and other toys. I really made these for a fridge magnet but folks at Etsy loved it for the detail. I am sure the community here on…

Downloads
1,197
Likes
120
Rating
5
P
PrintablesSMACKMAX_

Garbage Bin - 24x24x45(x) cm

Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…

Downloads
1,192
Likes
481
Rating
5
P
Printables8bitmcu

1:16 Truck/Crawler 4x4 RC Chassis

This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…

Downloads
1,183
Likes
358
Rating
5
P
PrintablesCWalters

Gridfinity Bins - 4x1 Format

Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…

Downloads
1,140
Likes
114
Rating
5
P
PrintablesReset

sliding puzzle 4x4 print in place

Summary sliding puzzle 4x4 print in place there are 3 versions: with 0.15, 0.2 and 0.3mm gap. to make it easier to move the stones, i recommend applying 1 drop of silicone grease to a cotton swab and carefully wetting the sliding points…

Downloads
1,128
Likes
170
Rating
4.8
P
PrintablesJay

4X1

4X1

Downloads
1,111
Likes
327
Rating
5
P
PrintablesSlanjonok

Jet another Vallejo/Citadel-Paint holder, standalone version 4x4

This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…

Downloads
1,098
Likes
151
Rating
5
P
PrintablesWilliam Call

Magic the Gathering Mat Container - 24x14

I wanted a nice container for my 24x14" playmat for MTG. I designed 2 different versions, locking and magnetic. The magnetic case uses 6x3mm magnets. MTG emblems on top, bottom, and sides. UPDATE - I've gone through a few iterations and…

Downloads
1,059
Likes
196
Rating
5
P
PrintablesRamBros

G-Wagon - 3D printed 4x4 RC car (Body)

G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. Join our : Discord The Chassis for this model can be downloaded here:…

Downloads
1,057
Likes
168
Rating
0

4x5 Standard Film Holder V2

Version 2 Overview Easy-to-make version. All parts have completely flat bottom surface. Also I checked necessary clearances, added place for velvet strip in the gate gap and made separate details for using it with thin 0.5mm metal or…

Downloads
1,046
Likes
144
Rating
4.5
P
PrintablesSumo.Hipster

Gridfinity 4x2 Pen tray

Remix of the original pen tray to fit a 4x2 gridfinity.

Downloads
1,026
Likes
112
Rating
5
P
PrintablesFudge

Lego Plate 4x2

Lego Plate 4x2, 2x4

Downloads
1,023
Likes
31
Rating
5
P
PrintablesGuido666

BatteryMag - 14x AA Dispenser

Introducing a whole new portable way to store and dispense your batteries, the BatteryMag! Designed to look and function like a standard rifle magazine, this handy device holds up to 14 AA batteries. It works very well for keeping extra…

Downloads
1,014
Likes
287
Rating
5
P
PrintablesDetailrail

Gwr 14xx 1400 class steam locomotive British rail great western railway model train model railway

Gwr 14xx 1400 class steam locomotive British rail great western railway model train model railway

Downloads
1,010
Likes
58
Rating
0
P
PrintablesJohnMartin

Gridfinity - Harbor Freight Pick Set - 4x2

I re-modeled this with the exact dimensions from charlescho's design, except I reduced the height by 10mm.

Downloads
997
Likes
187
Rating
4.9
P
Printables29flo

4x4 Off Road Car Model

4x4 Off Road Car Model This time, I'm presenting a 4x4 car model. In my opinion, the best way to print it is in a vertical position. But maybe someone has a different idea. Removing the supports takes a bit of effort, but I think it's…

Downloads
988
Likes
138
Rating
0
P
PrintablesK2_Kevin

Sony 4x and 6x Camera Battery Holder NP-FW50

Holds 4 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long. UPDATE: Added a 6 battery version. NOTE: Works with Sony A7,A7II and other Sony products that…

Downloads
977
Likes
118
Rating
5
P
PrintablesAYDLAB

Tea Bag Organizer (3x3) or (4x3)

1 Pocket Size (64mm x 71mm x 70,25mm) {xyz} You can download it in two different sizes. I printed the big tea bag with 0.4mm nozzle (0.3mm layer height; 15% infill) in PLA. Printer: Artillery Sidewinder X2 Nozzle: 0.4mm Layer height:…

Downloads
968
Likes
138
Rating
5
P
PrintablesCWalters

Gridfinity Bins - 4x4 Format

Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…

Downloads
931
Likes
76
Rating
0

4X AA Battery Case

Holds 4 rechargeable AA Batteries. Place batteries nub up for the “Charged” indication and nub down for the “Depleted” indication. I have tested it with the following rechargeable AAA battery brands: Amazon Basics AA High-Capacity -…

Downloads
888
Likes
87
Rating
4.91
P
PrintablesBowlerman72

Nut M10 4x15mm for PC4-M10 PTFE coupler

I needed a simple nut for the PC4-M10 PTFE coupling when making a drybox. Nothing fancy, created in OpenSCAD with “Nuts and Bolts v1.9.6 OpenSCAD library” by biomushroom that you can find here: https://www.thingiverse.com/thing:965737…

Downloads
880
Likes
77
Rating
5
P
Printablespynefox

Hot Wheels, Matchbox, or any 1/64 die-cast car Display 4x

Display stand for Hotwheels, Matchbox, Johnny Lightning, Greenlight, M2, Inno64, Autoworld, and other 1/64 die-cast cars. Can hold up to 4 cars! Edit: added the original shallower variant under “carholder shallow.stl” Print Settings…

Downloads
868
Likes
191
Rating
5
P
PrintablesSkateMan_GRE

Egg Carton (6x and 4x) - Hinge - Stackable - Print in place

Edit 2025/11/01 : added a version for 4 eggs. Original post : A simple Egg Carton for 6 eggs, with Hinge, Snap closing, Stackable. Can be printed in place. Printed in 0.2mm layer height, on Elegoo Neptune 4 0.4mm nozzle, Elegoo Rapid PLA…

Downloads
853
Likes
93
Rating
4.67
P

Rugged-ish Gridfinity Box Short 4x5x3 - Parametric

Great for storing lots of assorted, small parts. I didn't want to spend a ton of time and filament printing the full size rugged bins. I adjusted the hinges to account for the shorter height. The .stl files are 4x5u - fusion360 file is…

Downloads
851
Likes
256
Rating
5
P
Printablesstan110

Under Desk Drawer 4x4 Gridfinity

For the rails use the V12 rails from @Paul_318082 https://www.printables.com/model/440401-under-desk-drawer Update 15-5-2023: Update the drawers to V12

Downloads
832
Likes
180
Rating
4.89
P
PrintablesBigFootPL

Throw lever for Vortex Diamondback Tactical 6-24x50 FFP

Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…

Downloads
800
Likes
92
Rating
4.67
P
PrintablesCtihy

Karak / Carcassonne 4x4 tiles grid / mřížka

U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…

Downloads
799
Likes
79
Rating
4.9

ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings)

This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…

Downloads
799
Likes
66
Rating
4.67
P
PrintablesLayerCake

Gridfinity Knipex Super Knips Stackable 2x4x3 Container

A stackable Gridfinity Container with an Inlay to store different versions of the Knipex Super Knips. Designed in two parts so you can reuse the container even if you get different Knips. The Inlay has some magnet holes on the bottom and…

Downloads
792
Likes
208
Rating
5
P
PrintablesTycho Design

M4 Socket Head Screw Collection M4x6-M4x30 ISO 4762 / DIN 912

Collection of screws (ISO 4762 / DIN 912) including : M4x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…

Downloads
768
Likes
55
Rating
4.5
P
PrintablesErer2001

4x 3.5 inch hard drive cage on 140 mm fan mount (Extra holes for Masterbox Q300L/Q500L)

Mount four 3.5 inch hdd on a 140 mm fan mount. The extra 8 holes are for stability and works on Coolermaster Q300L and Q500L cases. Ender 3 v2 0.6 nozzle PETG Category: Computer

Downloads
764
Likes
112
Rating
5
P
PrintablesDamir Perisa

NVME 2280 storage box (4x vertical)

Next revision of the nvme 2280 storage box

Downloads
755
Likes
64
Rating
4.78

3DOM Makita LXT (18V) / XGT (40V Max) 4xBattery holder

Makita battery holder for four batteries. Works with 18V (LXT) batteries and 40V Max (XGT) batteries. A remix of Jerry's single holder. Supports only required from the built plate to support the joint tags. It can be done without supports…

Downloads
728
Likes
62
Rating
5
P
Printablesmbe075

6x6 Upgrade for 3D SETS Model 5 (Landy 4x4 Wagon)

○120mm extend to switch from a 4WD to a 6WD See instructions (pdf build guide file)

Downloads
726
Likes
119
Rating
5

24x USB Flash Drive Organizer

Similar to my TweakTown 24x Thumb Drive Organizer found here, this Flash Drive Organizer Holds 24 Standard USB Flash Drives but does not feature a logo. I have tested this model with the following thumb drives, but it will work with any…

Downloads
712
Likes
60
Rating
4.67
P
PrintablesGabriel

Gridfinity 4x4 Baseplate

Based on the work of ZackFreedman .

Downloads
712
Likes
42
Rating
5
P
Printablesdavide_molino

5.25" to 4x 2.5" Drive Bay Adapter

Adapter to fit 4x 2.5" drives into a single 5.25" bay. It supports 1x 40x20 fan for disk cooling and swappable faceplate. It also does supports locking mechanisms (like in my case). The model is printable WITHOUT supports (print…

Downloads
710
Likes
81
Rating
5
P
PrintablesLukas Pratz

4x4 Puzzle Cube

This is a 4x4 puzzle cube. It's very hard because the pieces are big and very unique. Piece 2 needs support I made a much harder 4x4 cube wich also doesnt need support. check this model out:…

Downloads
701
Likes
160
Rating
5
P
PrintablesDaTTcz

Držák WAGO svorek 4x 5W (WAGO holder)

Držák WAGO svorek 4x 5W. Velikost WAGO cca 30x10x18.5mm. 7.2.2023 - Opravena malá mezera v podstavci. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji

Downloads
687
Likes
86
Rating
4.83
P
PrintablesTycho Design

M4 Screw Collection M4x6-M4x40 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…

Downloads
666
Likes
65
Rating
5
P
PrintablesHighcooley

Multiboard open bin system 7x4x3 variant

a 7x4x3 variant of David's Multiboard open bin system for objects wider than 15cm

Downloads
638
Likes
214
Rating
5
P
Printablesshoooo

Gridfinity 4x4 and 4x2 base French cleat mount

Two options for attaching back (cleat) CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue Hardware, made for ¼ bolts 2 x ¾"…

Downloads
635
Likes
179
Rating
5
P
PrintablesDsK_Printing

Skadis-Holder [4x USB-Charger]

UPDATE 03.12.2023 Just added a us "type-a" variant of the horizontal_holder_usb_charger. Please note, that this one is not tested yet. After some feedback i'm going to add the remaining variants for type-a aswell.…

Downloads
633
Likes
143
Rating
4.93
P
PrintablesRadekG

204x60 air vent cover - honeycomb and net

Tried to create something that can be used outdoor. Honeycomb structure is intended to stop raindrops and additional grid should prevent insects from entering throuch holes or nesting in honeycomb. Internal 3x3 net is separated from…

Downloads
617
Likes
79
Rating
4.33
P
Printablessmtk

Battletech stackable miniature storage trays 4x2 and 4x1 All Mechs and Aero/Vehicles

Battletech stackable miniature storage tray Small 4x2 and 4x1, Stores 8 and 4 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…

Downloads
617
Likes
75
Rating
0
P
PrintablesAnt Ant

4x6 inch Picture Frames

The whole model uses about 90 grams of filament. I do 15% infill, Snug supports along the interior of the frame, no supports on the holes on the back of the frame fillets down on the picture backer. I also use .1mm layer heights to keep…

Downloads
617
Likes
99
Rating
3.5
P
PrintablesFreshPrints

4x5 Sheet Film Drying Rack

Holds up to 8 4x5 film sheets.

Downloads
608
Likes
90
Rating
4.9
P
PrintablesVelvia

4x5 film development tank

DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…

Downloads
607
Likes
117
Rating
5
P
Printablest0b1

Cover for 4x4 membrane keypad

Very simple enclosure for a 4×4 membrane keypad. Started as a test-print to check if I have the dimensions right. OpenSCAD files are included. Perhaps you find this useful for your own projects. Print instructions The screw holes are…

Downloads
599
Likes
67
Rating
5
P
PrintablesQueso_Grande

Honeycomb 4x6" Picture Frame

Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…

Downloads
588
Likes
69
Rating
5
P
PrintablesTritschi

4 Versions of SD Card Holder: 4xSD or 2xSD+4xMicro or 8xMicro Cards or 1xSD + 6x Micro, 1 Lid for 2 Sides

I downloaded and printed the sd card holder from "mmurase00". Then I figured out that the print can cause that sd card (micro and general sd as well) could either fall out of the slot or you have so much resistance that you run a high…

Downloads
574
Likes
72
Rating
4.8
P
PrintablesBenny

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 (normal and wagon) & Bamboo

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…

Downloads
573
Likes
54
Rating
4.94