Search results: 56

Sort order

1,905 models

P
Printableswedgeworks

Fruit and Vegetable Washing Basin from Thingiverse # 5685812

NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
3,608
Likes
1,665
Rating
4.67
P
Printablesysengard

Protective Case for TP4056

Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,413
Likes
125
Rating
4.83
P
PrintablesZOHOZ

5.56/.223 REM cartridge stripper clip.

Description Stripper clip holds 10 rounds of 5.56/223rem or any other similar cartridge Intended for clip loader located here Print instructions No rafts No supports 0.20mm quality 15% Infill PLA + or better Thank you and happy printing!

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
446
Likes
40
Rating
5
P
PrintablesRealPrint

(Wand) Halter für die 5690 pro / (Wall) mount for the 5690 pro

Halter für eine 5690 pro. Bohren: Lochabstand 22 cm Neu (3.25): Version mit mehr Wandabstand für Glasfaser-Anschluss Mount for a 5690 pro. Drilling: hole spacing 22 cm New (3/25): Version with more wall clearance for fibre optic connection

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
187
Likes
9
Rating
5
P
PrintablesAresROC

20mm Calibration XYZ Cube Dice - XZY456

Using Prusa Slicer negative volumns.

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
186
Likes
2
Rating
4
P
PrintablesLevi

223/556 Ammo Box | 25 Rounds

This 223/556 25 round ammo box was designed in Fusion360 and printed on a Prusa Mk3s+ with eSun pla+. This was specifically designed to be a gift for my pap. I have 5 round boxes as well, but haven't posted them yet. 3mf and gcode files…

Print approx. €12.87–€15.72 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
30
Rating
0
P
PrintablesJ. Anzicek

Motivational ear savers - 11pcs with 0.6mm nozzle 56 minutes

These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
131
Likes
8
Rating
5
P
PrintablesL7899

Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem

Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
117
Likes
23
Rating
0
P
PrintablesSpiegl Philipp

Lego City Train Curved radius 56 Studs Rail two-colore Version

Lego City Curved Rail Normal Radius 40 studs new version Radius 56 studs for bigger curves Print instructions Printer Prusa XL Multihead Filament: PLA Print height: 0.2mm Nozzle: 0.4mm Support: Are needed at the ends

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
17
Rating
0
P
PrintablesL7899

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem

Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
10
Rating
0
P
PrintablesL7899

Mopar 55155620AB, Jeep WJ "V8" Emblem

Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
13
Rating
0
P
PrintablesKladrie

Mercedes Benz A/B Class seat adjustment handles - reinforced replacements for part nos. A1699190561/A1699190661

Given the disparity in our heights the front seats in her B200 are adjusted forwards and backwards rather regularly. This is done by lifting the lever under the seat, and scooting in the desired direction. However, while the Benz is in…

Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
6
Rating
5
P

.223-.556 90 Ammo Holder

I created this ammo holder so I could quickly load 3 AR magazines at a time with my speed loader. It works great, only think I had to do after the print is just take a wire brush through the holes to clean up some of the filament stray.

Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
4
Rating
0
P
Printablesalphastratus

steering knuckle for LEGO 5600 RC car

A long time ago I got this LEGO set as a present from my dad. Because I like to drive fast and the RC control is only binary I crashed a few times and the jumps of the included big cardboard ramps did their part as well and the front…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
46
Likes
10
Rating
5
P
Printablesrndavis

DM556 DIN Rail Clip Mount - M3 Remix

Remix of Ereen's DM556 DIN Rail Clip Mount, altered to use M3 Heated Insert Hardware. Modifications: Extended Base to fit full width of DM556 variant Thickened mounting surface to accommodate M3 Heated Inserts (3.4mm → 7mm) Added Fillets…

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
9
Rating
5
P
PrintablesErikSi

181 Vorsicht: Spielende Zahlen! Zahlenknobeleien 123456

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
2
Rating
0
P
Printablescr0n1

LEGO 75356 Executor Super Star Destroyer mount

Could be used with other midi scale models

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
1
Rating
0
P
PrintablesHAL_9000

Lego Space background with Lego 3456 as base

I wanted a background for my LL928, so I've created the small one, one time Lego 3456 wide. Then I've thougt that it is to small so I've created a version that is 3x Lego 3456 to still fit my Ikea BESTÅ Logo can be easily replaced, I've…

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
6
Rating
0
P

Connect 42390556 Mixer Coupler - Spojka motoru a čepele tyčového mixéru

Printed successfully on MINI+ from recycled PETG with 100% infill. Works magics.

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
1
Rating
0
P
PrintablesErikSi

182 Vorsicht: Spielende Zahlen! Zahlenknobeleien 456

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
0
Rating
0

Waveshare OV5640 USB camera case/magnetic mount

Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
2
Rating
0
P
Printablesmartin_pihrt

Police strobo - stroboblikač NE556

Stroboblikač: https://pihrt.com/elektronika/287-ne556-policejni-stroboblikac-smd Category: Electronics

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
3
Rating
0
P
PrintablesR.R.

BMW 503 1956-1959 Coupe

BMW 503 1956-1959 Coupe

Print approx. €4.98–€6.08 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
3
Rating
0
P
Printablesnfranceschinis

0.007.5562.0 Clip Massey Ferguson

Replacement part for Massey Ferguson and SDF tracktors with cod: 0.007.5562.0 I used PLA but also PETG can work well

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
0
Rating
0
P
PrintablesMuse sriuboj

Repair of broken keys of antique tape recorder ITT RC 5600

The buttons on the tape recorder were broken. I printed the prostheses and glued them on. Check video https://youtu.be/IVWlkcGp7GQ

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
5
Rating
0
P
Printablesnotyahc67

BMW E28 Engine Hood Mechanism Handle Lever 51231868556

A replacement hood release handle/lever for the BMW E28. This is a replacement for BMW part number 51231868556. This part was broken on my 535is which required me to use pliers to pull the hood release cable. I created this replacement.…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0
P
PrintablesDavo456

Ferrari 456M rear arm rest tray

simple tray to fit inside the rear centre console of the Ferrari 456M supports needed on build plate for overhanging top edge

Print approx. €4.62–€5.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
1
Rating
0
P
Printablesdfeissle

porthole456

Replacement part for a porthole cover. Three different version (4,5,6). Main difference is between the sizes on inner porthole that lines up with the bedliner. Six is the final version. Screenshot shows original factory part and 3d…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
0
Rating
0
P
PrintablesF Engineering

ISO 7000-1564 volume half full

EN: To indicate that the container is half-full. To identify the half-full reading or position indicator on the display or container. DE: Um anzuzeigen, dass der Behälter halbvoll ist. Zur Identifizierung eines halbvollen Behälters auf…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
0
Rating
0
P
PrintablesF Engineering

ISO 7000-0356 water pump

EN: To identify a water pump. DE: Zur Kennzeichnung einer Wasserpumpe.

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
0
Rating
0
P
PrintablesAntherea

Ehemalige katholische Kirche "Zum heiligen Blut" in 35684 Dillenburg-Frohnhausen

Beschreibung Das Modell der ehemaligen katholischen Kirche „Zum kostbaren Blut“ (Rheinstraße 8, 35684 Dillenburg – Frohnhausen) ist das fünfte einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
1
Rating
0
P
PrintablesHadriel02

Led light Prusa Mini Enclosure mount - Aca lighting 5W DAPO560

Hello, i made mount for cheap LED panel Aca Lighting DAPO 5W, 520lm - 30cm long led panel with button and power from 230V. It costs about 6€ + 4€ power cord. I want to keep led outside from enclosure, its generating some (not much) heat.…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
1
Rating
0
P
PrintablesHamster

OHAUS 5601 Calibration Weights Covers

Inside cover for my Ohaus 5601 Sto-A-Weigh Pharmacy / Apothecary Brass Weight Set was misplaced. So I made this model to replace it. These covers also fit a similar set made by TROEMNER Larger cover is 20x98mm Smaller cover is 13x90mm

Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant

Downloads
2
Likes
0
Rating
0
P
PrintablesHack_n_Splice

Arduino Mega 2560 model (Rexqualis version)

This is a 3D model of an Arduino clone of the Mega 2560 microcontroller board. I needed one for an enclosure design, but couldn't find one that had precise dimensions for the mounting holes. Despite no officially-diagnosed OCD, my brain…

Downloads
4,677
Likes
39
Rating
5
P
PrintablesCtowns5

Modular 100rnd ammo box for 223/5.56, 9mm, and others.

Ammo box to hold 100 223/5.56 cases. All screws are m3x30 unless you use the handle then those 2 should be m3x35, m3x40 for double handles. March 2024, added a 9mm tray as requested so you could do half and half or use the same box for…

Downloads
3,138
Likes
498
Rating
5
P
PrintablesNakozen

Fi 156 Storch Kit Card

The Fieseler Fi 156 Storch (Stork) was an unarmed liason aircraft produced in Germany before and during World War II, noted for its superb STOL capabilities. It would later be produced and flown by the French until 1970. I tried my best…

Downloads
2,553
Likes
644
Rating
4.81
P
PrintablesIvan3D

Bin for Ikea skadis - 564 models - hooks need support

Bin for IKEA SKADIS. Hooks need support. Size: A box can be in standard shape , or equipped with a wave and/or separator and/or hexagonal bottom. The separator is not available if the hexagonal bottom is present. Folders: There are 564…

Downloads
2,347
Likes
746
Rating
5
P
PrintablesLeokaldzik

Annoying box, perfect gift box 56 srew, screwdriver

Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…

Downloads
2,209
Likes
281
Rating
4.22
P
Printables_jon

AR-15 5.56/.223 Speed Loader

Remixed from the excellent source model - thank you FW_3D for uploading the .step files 🙏 Differences from the original: Added clearance for rounds Added captive guides to the pusher to keep it engaged Rotated viewing slots to allow…

Downloads
2,065
Likes
358
Rating
5

Fritz!Box 5690 Pro Wall Bracket

I designed this wall mount for a Fritz!Box 5690 Pro using Tinkercad. I printed the model in PLA without supports (5 walls, 25% infill). However, I recommend using PETG or ASA if available. Note that the STL file needs to be mirrored for…

Downloads
2,005
Likes
65
Rating
5

Lithium Battery Charger Li-ion Module TP4056 USB C mock up

This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…

Downloads
1,977
Likes
71
Rating
5

Star Trek TR-560 Tricorder Kit

Happy to present my version of the TR 560 Mk VI Tricorder as seen on the first season of Star Trek TNG. This early style featured a small hand scanner that tucked away at the top, includes a medical tricorder module with its own stow-away…

Downloads
1,861
Likes
363
Rating
5
P
PrintablesMupshot

Ammo box 5.56-.223

50 count storage box. two potential lids. the recessed lid is thicker on the side to reinforce the track. the tray may be modified and published later. Print Settings Resolution: .2 Infill: 20 Notes: this was my first attempt at a pattern…

Downloads
1,858
Likes
259
Rating
5
P
PrintablesLWC

PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)

UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…

Downloads
1,844
Likes
1,231
Rating
5
P
PrintablesJori

TP4056 18650 battery charger

I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…

Downloads
1,839
Likes
218
Rating
4.76
P
Printablesskore87

AR-15 Chamber Flag for 5.56 .223 .300

I took the SAAMI specs and designed a chamber flag that will accurately index in the same place regardless if you use .223/5.56 or .300 Blackout. Because it indexes on the datum line of each cartridge it will always stick out the same…

Downloads
1,764
Likes
243
Rating
5
P
Printablesspearmountain

.223 Remington/5.56 NATO replica and snap cap

.223 Remington, almost identical to 5.56x45mm NATO, also known as just 223 or 5.56, is a centerfire rifle cartridge. .223 Remington was designed by Remington Arms in 1957. 5.56x45mm NATO was designed by FN Herstal in the 1970s. Print this…

Downloads
1,744
Likes
153
Rating
4.86
P
Printablesmrusk

Windy City Woodwinds Series 56 Saxophone Mouthpieces

When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 56”. I have…

Downloads
1,735
Likes
79
Rating
5
P
PrintablesErvin

Samsung galaxy A56 phone case

Print this in TPU. I modeled this with help from reference images from the internet and fixed after testing on a real phone UPDATE 1: I redid the placement and shape of holes on top and bottom, according to better reference images. I…

Downloads
1,630
Likes
47
Rating
4.4
P
PrintablesRudy Martin

5.56mm X 45mm NATO Bullet

FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…

Downloads
1,607
Likes
116
Rating
5
P
Printablesis-serp

.223 Remington / 5.56x45mm NATO

The .223 Remington is a rifle cartridge developed in 1957 as a hunting bullet. A military version, the M193, was used by the United States Army in the M16 rifle. The 5.56x45mm NATO was also developed from the .223 Remington. Category:…

Downloads
1,596
Likes
94
Rating
5
P
PrintablesRadek Š.

Dremel Multipurpose Cutting Kit (565)

Rozměry jsou přibližné podle fotografie originálního nástavce. Zajištění pomocí šroubu M6. Matice lze vsounout volně, hlavu šroubu je lepší nahřát vtisknout za tepla. Vítám případné připomínky, udělám změny :) Tisk bez podpěr.

Downloads
1,483
Likes
670
Rating
4.92
P
Printables3D_Printing

Arduino MEGA 2560 Case

Es un estuche para tu Arduino MEGA

Downloads
1,356
Likes
69
Rating
4.38
P
PrintablesLyl3

56 Room Signs Like "The Office" Logo

56 Room Signs Like "The Office" Logo These are residential room signs designed in the style of the logo for "The Office" TV show. Please post your makes so I can see which signs/pictograms are the most popular. Dual Colors with a Single…

Downloads
1,337
Likes
519
Rating
5
P
PrintablesNiSE

5.56 Snap Caps / Dummy Rounds

A few 5.56 NATO rounds I modeled up to use as snap caps or dummy rounds. All three variants are able to feed and extract in my rifle. The Spec variants are exact to NATO spec dimensions and the ThickRim has a roughly 0.3mm thicker rim for…

Downloads
1,317
Likes
91
Rating
4.75
P
PrintablesRat Bastard

.223/5.56 Ammo Holder for MTM .30Cal Ammo Can

I designed these ammo holders to hold 400 rounds of either .223, 5.56, or 300 AAC Blackout ammo. These fit into the MTM .30Cal Ammo Can for storage. Print instructions Photos are original design, I recessed the dividers down a bit to save…

Downloads
1,302
Likes
279
Rating
5
P
PrintablesVincent

LEGO Peugeot 9X8 24H Le Mans Hybrid Hypercar 42156 Vertical Mount

Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…

Downloads
1,282
Likes
69
Rating
5
P
Printablesliangodesigns

tp4056 usb-c model li-ion charge circuit 3d model

In case you want to design a part that includes a tp4056 charge controller.

Downloads
1,268
Likes
28
Rating
0
P
PrintablesPopandsicle

Display Stand for Lego DeLorean - (LEGO Speed Champions #77256 "Time Machine from Back to the Future")

A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…

Downloads
1,133
Likes
141
Rating
4.83
P
PrintablesPlexi

Train / Dept. 56 Model Street Lamp

I resized the original design to be 1:48 scale so that 3.5" is equal to a 14 foot high street lamp. This size matches the Dept. 56 Snow Village houses. I increased the size of the hole through the middle so that wires could be fed…

Downloads
1,118
Likes
191
Rating
4.89
P
PrintablesHack_n_Splice

Arduino Uno and Mega 2560 Stand with LCD and Breadboard Mounts

I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…

Downloads
1,091
Likes
148
Rating
4.63
P
PrintablesSmarThuis

LEGO 2556 Ferrari Formula 1 Racing Car

Disclaimer: This is not an official LEGO product. All design rights, trademarks, and intellectual property belong to the LEGO Group. This model is a fan-made recreation of the LEGO 2556 Ferrari Formula 1 Racing Car set, intended for…

Downloads
1,091
Likes
209
Rating
5
P
PrintablesMKprints

NVA M56 - Beer Bottle Helmet / Bier Flaschen Helm

English I have remixed the wonderful beer bottle helmet model and replaced the helmet with an NVA M56 helmet from the GDR. Print settings You can use the print profile (3mf) with pre-configured settings and colored hand for ams usage. Arm…

Downloads
1,084
Likes
161
Rating
0
P
PrintablesVoxel3D_NL

HappyCam, Voron 2.4 OV5640 camera mount

Even after 5 times of printing the AngryCam OV5640 mount of "chri.kai.in" I could not get the thing to print and fit together correctly. The tolerances seem quite tight and you need an extremely precise printer to get good results. Apart…

Downloads
1,021
Likes
172
Rating
4.64
P
PrintablesErich Schultz

223/5.56mm ammo box (stackable)

UPDATE 3/18/24: I have split this into two models, the box and the lid. I have also made it taller to better accommodate different types of ammo. These I've uploaded as STL files. Thank you everyone for your feedback. This is a simple…

Downloads
1,017
Likes
123
Rating
5
P
PrintablesCadeyzDad

AR 223 556 PMag Race Mag Pouch

Race Mag Pouch for 223 556 Pmags for ELS mounting system Update 11192023 Added Strengthening Ribs to the mounting side of the pouch Reduced mounting height by 1mm Made insert holes 0.2mm smaller Update 01152023 Got some feedback about the…

Downloads
979
Likes
174
Rating
5
P
PrintablesYXC

N in 1 18650 TP4056 Charger

A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…

Downloads
978
Likes
151
Rating
4.78
P
PrintablesAksup

AR-15 .223 Rem 5.56 Nato Chamber clear flag

Chamber clear flag for AR-15 modelled after .223 Remington/5.56 Nato round specifications.

Downloads
972
Likes
200
Rating
4.33
P
PrintablesTobias Carlsson
Downloads
968
Likes
154
Rating
5
P
PrintablesJevermeister

DIN Rail DM542 DM556 CNC stepper driver mount with M4 heat inserts

You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…

Downloads
952
Likes
76
Rating
5
P
PrintablesjonnieZG

Dummy 5.56 Bullet Chain Link

Dummy 5.56mm x 45mm NATO Bullet Chain Link, that snugly fits 5.56 dummy rounds for M249 and other 5.56 chain-fed airsoft replicas. It's a model based on the M27 disintegrating link designed for ammunition belt-fed firearms. I printed mine…

Downloads
951
Likes
114
Rating
5
P
PrintablesWagZ

Hopper Fed Speed Loader 223/556/300

So yah, I downloaded this like a lot of other ppl and struggled like crazy with the original design. it kinda sucked.. and I was determined to make it work cuz I know lots of avid shooters, including myself, who would benefit greatly from…

Downloads
946
Likes
242
Rating
4.33
P
Printablestato_713

Samsung Galaxy A35 & A55 a356 a556 case

Thanks to Arshia who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If you have any request…

Downloads
930
Likes
42
Rating
4.33
P
PrintablesPeter Welch

FRITZ!Box 5690 Pro Wall Bracket - Combined w/ Heat Set Inserts

This wall mount for the FRITZ!Box 5690 Pro is a refined remix designed with enhanced stability and ease of installation in mind. Unlike the original, this model includes a connecting center section to keep the brackets perfectly aligned,…

Downloads
879
Likes
44
Rating
4.67
P
Printablesctheroux

Arduino Mega / Mega 2560 / Due Drilling And Mounting Plates

This thing contains a mounting plate and a drilling guide for the “Arduino Mega / Mega 2560 / Due Drilling And Mounting Plates”. The plates are not symmetrical. The notch shall be on the power jack and ethernet cable side. The base plate…

Downloads
866
Likes
25
Rating
5
P
PrintablesYvrogne

Giant ㄥ乇Ꮆㄖ Pirate Flintlock Pistol (2562) (10:1 scale)

Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join

Downloads
827
Likes
253
Rating
4.9
P
PrintablesRudy Martin

Blue Magazine - 5.56mm X 45mm

Note: Before printing, please measure the size of the magazine slot of the gun you want, and fine-tune the size through the slicing software to avoid the situation that the magazine cannot be loaded into the gun.

Downloads
819
Likes
110
Rating
5
P
PrintablesDivideby0

Wall mount for DeWalt DCS356 Oscillating Tool

Wallmount for DeWalt DCS356 Oscillating tool

Downloads
798
Likes
130
Rating
5
P
PrintablesCali2

Slim .223 / 5.56 Ammobox 50rds V2.0

Slim Ammo-Box for .223 / 5.56 ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 Update: Slot for label infront of box engraved “.223 Rem” infront of Box Locking mechanism…

Downloads
782
Likes
52
Rating
4.5
P
PrintablesMaxT

Christmas Door Trim Corner 56 - Christmas Tree and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
782
Likes
174
Rating
5
P
PrintablesSsgtStretch

RC Tower Crane 1.42m 56in

Recommended items to complete this crane are hot glue, BBQ skewers, Popsicle sticks, rubber bands, 30 minute epoxy, kite string, small-sized hand-held drill and bits, four 360 degree rotating 9 gram servos, one receiver, transmitter, and…

Downloads
762
Likes
178
Rating
4.33
P
Printablesfreedom2000

AS5600 encoder holder for NEMA17 stepper motor

A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering

Downloads
762
Likes
22
Rating
0
P
PrintablesTurboJonte

Dewalt DCM561 string trimmer wall mount

Needs printing with supports.

Downloads
753
Likes
118
Rating
5
P
Printablesthall72
Downloads
723
Likes
55
Rating
5
P
PrintablesPotatoGambit

223/5.56

This is a scare and dimensionally correct print of a 223 cartridge. Category: 3D Printing

Downloads
718
Likes
59
Rating
4.6
P
Printablesravestop

LEGO Technic - Porsche 911 GT3 RS (42056) Wall Mount

printed with ankermake m5 in normal mode, 50% infill, support

Downloads
699
Likes
63
Rating
5
P
PrintablesGizmo Gurus

RangeVault - Ammo Box (5.56 Edition)

Overview A rugged and reliable ammo storage box designed for firearm enthusiasts, reloaders, and range goers. Holding up to 81 rounds of 5.56, this compact case fits easily inside a range bag, making it a great alternative to flimsy…

Downloads
675
Likes
225
Rating
5
P
PrintablesCtowns5

223/5.56 x 50 ammo box with a seal

This is a remix of one of my favorite ammo boxes. It holds 50 cases. I liked the original but wanted one for 5.56. The ones pictured were all printed in PETG and work great. Only the latch and latch hinge need support. The second picture…

Downloads
673
Likes
124
Rating
5
P
PrintablesVash Baldeus

Disk Grinder Dust Collection (DeWALT DW4156)

Recently my family decided to remodel some parts of the house, that included cutting some walls using a grinding disk. In order to create channels to hide power cables in. I purchased a DeWALT DWE4156 along with a wall cutting disk, I was…

Downloads
660
Likes
148
Rating
5
P
Printablesthall72
Downloads
644
Likes
100
Rating
0
P
Printablesthall72
Downloads
641
Likes
94
Rating
0
P
Printablesjmynheir

Magpul PMAG Gen M3 Follower 223Rem / 556NATO

Replacement follower for Magpul Gen M3 Pmag in .223 Remington / 5.56 NATO. Modeled in Blender, I included the .blend file. If you are looking for the baseplate, @mocobaco has one at https://www.thingiverse.com/thing:2646840 Category:…

Downloads
640
Likes
55
Rating
0
P
PrintablesmangoByte

AS5600 encoder Nema17 stepper motor mount

A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required

Downloads
630
Likes
24
Rating
5
P
PrintablesJeffH

Dewalt 6.5" Circular Saw (DCS565) Wall Mount

Wanted an easy way to mount my Dewalt 6.5" circular saw in my garage. I designed a two piece mount that the tool slides in and out of easily. Screw the two pieces into the wall with a 10" gap between them. Slide the top of the plate of…

Downloads
626
Likes
89
Rating
5
P
Printablesthall72

Lego Compatible (2561.dat) Minifig Gun Musket

This model is compatible with the lego system.

Downloads
624
Likes
74
Rating
0
P
PrintablesBehnam

TP 4056 TYPE C MOUNT

TP 4056TYPEC module frame

Downloads
610
Likes
55
Rating
5
P
Printablesstah

AR15 Bore Guide .223 / 5,56

A well-known AR15 cleaning tool. Now available for 3d print. Fits perfectly if printed 0,15mm or less. If necessary, sand a little internal hole with 600 paper grit. Attached as a one part and cuted into two pieces with connector - for 3d…

Downloads
609
Likes
45
Rating
5
P
PrintablesNautilus

Porsche 356 speedster

This is not my design. it's from Tini1 I changed the stearing weel and cut of the weels so you can print this without support. I put the wheels in a separate file ..glue them back on 2:1 printed layer size 0.1 Print instructions Category:…

Downloads
609
Likes
56
Rating
5